How to Replace Alternator 2003-04 Chevy Silverado

Подписаться 474 тыс.

Просмотров 57 тыс.

50% 1

Buy Now!
New Alternator from 1AAuto.com 1aau.to/ib/1AEAL00552
The alternator in your vehicle powers the battery and electrical system while the engine is running. If your alternator is failing, you may wind up with a constantly draining battery. This video shows you how to install a new alternator engineered specifically for your 1999-2007 Chevy Silverado.
• Check here for more videos on the 1999-2007 Chevy Silverado: • Chevy Silverado 1999-2...
This process should be similar on the following vehicles:
1999 Chevrolet Silverado 1500
2000 Chevrolet Silverado 1500
2001 Chevrolet Silverado 1500
2002 Chevrolet Silverado 1500
2003 Chevrolet Silverado 1500
2004 Chevrolet Silverado 1500
2005 Chevrolet Silverado 1500
2006 Chevrolet Silverado 1500
Tools you will need:
• Pry Bar 1aau.to/oa/1AXAA00020
• 8mm Wrench 1aau.to/oa/1AXAA00011
• 10mm Socket 1aau.to/oa/1AXAA00017
• 8mm Socket 1aau.to/oa/1AXAA00017
• Serpentine Belt Tensioner Tool 1aau.to/oa/1AXAA00019
• Ratchet 1aau.to/oa/1AXAA00016
• Socket Driver
• Socket Extensions 1aau.to/oa/1AXAA00015
• Torque Wrench 1aau.to/oa/1AXAA00044
• Rust Penetrant
• Hammer 1aau.to/oa/1AXAA00091
Subscribe: / @trq
Check out our playlist:
Chevy Silverado 1999-2007 1st Gen: • Chevy Silverado 1999-2...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Авто/Мото

Опубликовано:

20 июл 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 28

@TRQ 3 года назад

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

@munwaaa Год назад

Some additional advice: as far as those, not exactly sure what you call them but the circular clips within the ears that help snug the alternator to the frame, most people use a hammer and that’s fine but remember if you break those ears you’re screwed, I would take a pair of vise grips and clamp down on the side of that clip closest to the front of the engine, if you clamp down pretty hard, it’ll make it much easier to tap through and won’t risk breaking the ears. If you tap those circular clips far enough forward, you should have zero problem getting the alternator in . If you have trouble getting the belt back on; the most common problem is people don’t crank the ratchet far enough to the passenger side side of the vehicle before they start their crank down to the driver side so with the biggest ratchet you can find start crank it left all the way possible and then take it down to the fan drive shaft, and that should be enough to get the belt on. Also, addressing somebody else’s question if you have not replaced your serpentine belt in a while, you might as well do it then because it’s really easy to put on you just have to fall the guide picture on your engine. Hopefully this address as the two most common problems. Also, for the guy who dropped a nut in his intake if you take a rag or paper, towel and stuff it in where the throttle body is, it’ll prevent things from going in there, and at the same time you can clean it if it’s dirty; The valve should be closed. iPad typing so verbiage is not the best but kudos to the guy who made this original video. Hopefully this helps the weekend mechanic warriors like myself.

@galenrichard5706 3 года назад

Like your video the last guy i watched on RU-vid Started out his video painting out a room And ended the video working on a truckYou are directly to the point 👍👍

@thecoffeyshop7126 2 года назад

I JUST WATCH THE SAME VIDEO!!!!!!!

@jayjayjayjay420 Год назад

I came from the same place 🤣

@Nochero 4 месяца назад

Truck was having the “Battery Not Charging” Alert swapped out the alternator for a fresh one everything like new thanks for the helpful video 😎😎👏👏👏

@jimjohnson3244 2 года назад

This is exactly what I was looking for ! Needed to know how to get the big plug off of the alternator. You showed me every step I needed to do……awesome!

@TRQ 2 года назад

+Jim Johnson Thanks for watching our video! 1aau.to/m/Shop-TRQ

@godstruesoldiers2539 2 года назад

Was a good video could have been better if you actually mentioned what size sockets you were using for Everything.

@joejunior1974 2 года назад

Great video! Thanks for sharing

@brooster87 2 года назад

Thank you. Great job.

@nunyabusiness5339 Год назад

Great video! Thank you!

@wyattsmith3995 Год назад

do you have to change the belt when you replace the alternator?

@tarnokm 9 месяцев назад

Great video. I would add a note that if you replace the original alternator with a 145 amp one, you need to install a new belt. For some reason, the belt needs to be just a hair longer with the 145 amp. I was scratching my head for a while trying to figure out why I could not get the belt back on.

@TRQ 9 месяцев назад

+Kevin Tarnowski Thanks for the tip! We'll pass this info along to our production team. 1aau.to/m/Shop-TRQ