How to Replace an Outdoor Faucet with a Frost-Proof Sillcock | GOT2LEARN

Подписаться 585 тыс.

Просмотров 583 тыс.

50% 1

Don't risk bursting your pipes, change yours before it starts getting cold!!! In this video, I'll go thru all the steps on how to PROPERLY install a non-freezing hydrant for your home. As usual, I'll give all the tips & tricks that go with it to make the job a breeze :)
Join my plumbing forum for FREE!
got2learn.freeforums.net/
How to solder copper pipe the CORRECT way: goo.gl/8SkBiJ
The hydrant I used: goo.gl/dZqxgT
The rotary drill I used: goo.gl/cBrebU
The fluxing device is used: goo.gl/EBuqzE
The adaptor I soldered on (1/2" PEX): goo.gl/Dm6Fi8
The adaptor I threaded on (1/2" female): goo.gl/XBHWq6
The pipe sealant (not in the video, but just as good): goo.gl/nua5SE
DISCLAIMER: Got2Learn is NOT responsible for any damage done to a property of which the plumbing wasn't done by a professional, I do not recommend doing your own plumbing if you are unsure about what you are doing, always hire a LICENSED contractor when doing any type of plumbing so you can be covered by insurances if something does happen, these videos are for entertainment purposes only!

Опубликовано:

25 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 249

@joenobody571 4 года назад

I did this last weekend so glad I found out about the frost-free sillcock before doing it definitely worth the investment

@ronwade5433 4 года назад

Just did one on an old house in Flagstaff, yeah it's Aridzona but here at 7,000+ feet ASL, it snows! I might suggest only this, the only freezeless fawcet I could find at the big box hardware stores were all 1/2 inch, I needed 3/4 so off to the adapters Easter Egg Hunt! And, This Place had one inch galvanized right behind the old one so there was a grounding wire, lamp cord, which was not hooked up. No matter how well we Leak Proof our work, any exterior plumbing MUST be well grounded and, the Teflon tape doesn't stop cathodic reaction but will add BooCoo resistance. Lightning kills, grounding saves Lives.

@sidrahsmith1465 4 года назад

This is not the video I was looking for but I stayed for that gorgeous accent! Salut.

@Got2Learn 4 года назад

Thanks ;)

@thefloridaplumber2631 5 лет назад

That is a nice looking install!

@brianpereira807 5 лет назад

great, quick, pro stuff! enjoy all your videos

@Got2Learn 5 лет назад

Great to hear! I'd love if you can share with your friends and family, it would help keep this channel running healthy, thx again!!

@evenflow3256 5 лет назад

You have to drill the hole on a slope upwards from outside first on thick or multiple joists installs.

@sherrimorana4676 5 лет назад

Great job as always 🙂🙂👏🏻👏🏻

@Got2Learn 5 лет назад

@tobyw9573 4 года назад

You will need the shut off if you need to overhaul or replace the sillcock in the future.

@stanm8462 4 года назад

I bought exactly same faucet from Home Depot and it started leaking first winter. Home Depot replaced it and second started leaking next summer. It might be just this brand (Aqua Dynamic) that leaks for some reason.

@erichutchison4938 5 лет назад

I've been a plumber for 28 years, good thing I've got your educational videos to keep me going every day

@Got2Learn 5 лет назад

Great to hear! I'd love if you can share with your friends and family, it would help keep this channel running healthy, thx again!!

@rawbacon 5 лет назад

I used to do quite a bit of commercial plumbing in factories and such.........We always used tape and dope on those large fittings.

@Got2Learn 5 лет назад

It's a must!

@virginia7125 3 года назад

I noticed that in the video. I either use tape or dope. I have never used both on the same connection. Dope on metal, with tape on plastic most of the time. Tape on shower heads though, because you need to turn it until it's straight down. Dope gets tight sometimes before it's straight.

@beotheguitarist 5 лет назад

Great video!

@Got2Learn 5 лет назад

Thanks buddy, really appreciate your positive comment, keep em' coming!

@cdb989 Год назад

Whenever I need plumbing advice I hit you channel, believe me I need plumbing advice lol. Great channel thanks for you time in making these videos

@Got2Learn Год назад

😇😇😇

@renatotesta902 5 лет назад

Learned lots! I'll definitely be doing this next year. Thanks G2L!

@Got2Learn 5 лет назад

;)

@marshallgoldberg8376 4 года назад

Your plumbing videos are outstanding! Thank you very much.

@Got2Learn 4 года назад

Glad you like them Marshall, have a great day!

@gyver471 4 года назад

Good video the hose Bibb mounting plate are good too and you should had installed a ball valve to isolate it.

@Got2Learn 4 года назад

Thanks gyver!!

@ExtraJohnson Год назад

I would've gone with an 18 or 24 inch sillcock to avoid having a connection inside the wall. This would also ensure the valve stem washer is shutting off the water inside the conditioned space.

@nx8618 5 лет назад

Nice work

@Got2Learn 5 лет назад

Great to hear! I'd love if you can share with your friends and family, it would help keep this channel running healthy, thx again!!

@mattj801 3 года назад

Great video, thanks!

@Got2Learn 3 года назад

Glad you liked it, THANKS!

@strongisland7015 3 года назад

The plastic wedge right behind the valve is what angles the faucet downward when screwed to the wall. So no need to shim the pipe. But maybe that wasn’t possible with your install?

@realrobertjohnson 2 года назад

Thanks for the video. I am in western Canada. We have a lot of water main breaks due to shifting (due to Gumbo soil/clay). The city will be relining our water mains to extend the life cycle of the water infrastructure. During the relining process, water will be delivered to our houses via the front exterior faucet/hydrant. They have specified that we "Ensure that the tap does not include any backflow preventers." My question is this: Does anyone know if the anti-siphon/backflow mechanism can be temporarily disabled on the these hydrants, e.g., the one linked in the description?

@holoxfauxfecs5651 3 года назад

Thank you!

@israelmacotela6817 3 года назад

Nice video 👍! Thanks

@Got2Learn 3 года назад

😇😇😇

@doylee469 4 года назад

Fantastic buddy

@Got2Learn 4 года назад

Thank you Joe!!

@skaizun 2 года назад

That water was flooding against your foundation. Consider adding drainage rocks or a french drain or a plastic shield or gutter downspout diverter, etc., to keep the water away from the edge of the house.

@1960mierkeg 3 года назад

Add this to your valve selection as the unit needs to be long enough to extend into the warm part of the building. I made this mistake and one cold night it froze and ruptured the pipe before the valve

@ircimager 3 года назад

and using pexB for it like that reduces your flow rate at the joint. notice the brass elbow at the pex joint. it's a little narrower than the pipes going onto it. use the pexA system you can maintain your original flow rate

@carlthornton3076 4 года назад

Very Good!!!

@Got2Learn 4 года назад

Thank you! Cheers!

@georgedavall9449 3 года назад

Got2Learn Got 2 B one awesome source of knowledge and capability! Ha ha rhyming... Seriously, have watched a ton of your videos, and realized I Had NOT Subscribed! I just took care of that. Give this awesome dude support everyone! Thanks! 👍👍👍😁✌🏻🇺🇸 🔧

@Got2Learn 3 года назад

You're awesome, thanks a million George!! 👌👌👌

@beotheguitarist 5 лет назад

This guy is awesome!

@hinga453 5 лет назад

What tool are you using for cleaning the copper and also what water pipe would you prefer on commercial units?

@Got2Learn 5 лет назад

The tool is called the Fluxuator (can be bought at www.fluxuator.com) and recommended water pipe is copper type L.

@jrm2383 4 года назад

I’ve gone through 3 of those things in 5 years. This year I installed a 1/4 turn regular hose Bibb, much better. If you have a shut off in basement, frost proof isn’t really needed

@bigpardner 4 года назад

What went wrong with yours that ypu couldn't simply replace a washer or other small part?

@virginia7125 3 года назад

Yeah, those bibs seemed to last longer. You can still get packing for those by the way to stop a small drip.

@ExtraJohnson Год назад

I went through a couple before I stopped buying Chinese made ones at Home Depot. I found a USA made Arrowhead Brand one at a local hardware store that's lasted 8 years so far. Also, disconnecting the hose before winter is a must. I've gotten into the habit of just disconnecting the hose every time I finish using it, even in summer. Quick disconnect fittings make it easy

@refnel 2 года назад

i think you also speak french, i love your instruction i will follow your work ty

@Got2Learn 2 года назад

Absolument :) merci!!

@mtadams2009 3 года назад

I have watched a bunch of your videos and they are usually very clear. This one seemed a little rushed. Maybe its me. That crimp on connection seems a little shaky but then again I am not a plumber. Thanks for making such good content. Take care

@Got2Learn 3 года назад

Sorry about that.

@mtadams2009 3 года назад

@@Got2Learn No problem, you make really good content, which I have found very helpful. Thanks

@Got2Learn 3 года назад

Will correct that in the future, thanks so much Scott!!

@andrewdawson7926 5 лет назад

He should of installed a shut off valve, for the hosebib. A 1/2in ball valve with a bleed.

@phiksit 4 года назад

Cause these new pieces of shit are guaranteed to break. And fuck pex... and pipe dope over teflon tape? 0_o

@Santiago-iv7oi 5 лет назад

Nice..👍👍👍👍👍👍

@Got2Learn 5 лет назад

Thanks, please share!!! ;)

@jameskelly2777 Год назад

Very good

@marmaloot6350 5 лет назад

If replacing one of these, how do you screw it on so the spigot will be right side up?

@theaceofspades39 3 года назад

Any NPT fitting (national pipe thread) requires teflon tape and/or pipe dope to seal. The tape/dope is creating the seal meaning you don't necessarily need to crank on the fitting for it to seal. Turn the fitting until it's relatively snug and in the right position but again it doesn't need to be put on as tight as you can possibly get it

@NakataQenKByo 5 лет назад

Could you do a video on how to ProPress correctly?

@Got2Play 5 лет назад

Yes, I am trying to work something out with Ridgid to get a gun, but I do have a video coming up that'll cover everything about Uponor ProPex, that might interest you ;)

@paulsmith9341 5 лет назад

I didn't know there are stucco homes Canada! Thanks for the info about the no freeze spigots!

@Got2Learn 5 лет назад

Thx Paul, glad to have you onboard buddy ;)

@apex007 5 лет назад

I think they even have roofs.

@lmanaraovaniggalla9098 4 года назад

Thanks sir👍👍👍

@Got2Learn 4 года назад

You are most welcome :)))

@canonoyca4609 4 года назад

Nice shout out sir

@canonoyca4609 4 года назад

Canonoy Tv from Saskatchewan..

@franciscoc3369 5 лет назад

Gracias 👍

@Got2Learn 5 лет назад

Great to hear! I'd love if you can share with your friends and family, it would help keep this channel running healthy, thx again!!

@sut2910 4 года назад

Well yeah that was easy. Try showing one where the supply pipe and elbow are inside the wall, not through/exposed for easy access.

@Got2Learn 4 года назад

Will do, thanks!

@thomaka3749 3 года назад

So I have two of these in my house and I'm trying to find a shut off for them in the basement and can't find them. It's a house built in 2011. Don't know if frost proof faucets need a shut off or not? Thanks

@Got2Learn 3 года назад

Yes, normally theirs ashut off for them.

@kyleb.7746 5 лет назад

Hi there, how do you remove this? I have a very similar setup and the screws that are fastening the spigot will not come loose. Only option I've scene right now is to drill around it to loosen it back up. Thank you!

@Got2Learn 5 лет назад

Well, if you break the concrete, you won't be able to reinstall a new one. What you can try is to use a oscillating tool to cut the screws in the back of the spigot, lemme know if it works ;)

@kyleb.7746 5 лет назад

@@Got2Learn Thank you very much! I will try this :)

@robinford4037 5 лет назад

Fein E-CUT CARBIDE BLADE are good for cutting hardened or tempered screws , a normal metal or metal/wood blade are next to useless on screws, they are only good for nails and soft metal

@mexinumba1 2 года назад

Question: is 1/2 pipe acceptable or does it have to be 3/4 inch when doing exterior hose bibs?

@Got2Learn 2 года назад

1/2"

@Bward216 4 года назад

pretty dumb to remove the secondary shut off for the outdoor sillcock. Now the whole house has to be shut down for any future change out and you can't isolate it to prevent any question of issues during winter by shutting off from inside (kids turning it on)

@Got2Learn 4 года назад

I have another one right above lol.

@Bward216 4 года назад

@@Got2Learn haha that's what I get for watching with no sound. With no reference it looks like it was just removed all together

@Got2Learn 4 года назад

Yeah everybody thinks that, only I know there's another valve, I shoulda just said it lol

@DAVADMDAVAD 4 года назад

foam sealant the inside as well for cold air and insects.

@Got2Learn 4 года назад

Yes good info, thanks!!!

@sammyg3697 5 лет назад

Is it ok to have a well suction pipe go up over something like a shelf and then back down into the shallow well pump or will that cause problems with suction?

@Got2Learn 5 лет назад

I wouldn't think so

@sammyg3697 5 лет назад

Thanks, my concern is it losing prime from draining if it's hooked up like that

@Got2Learn 5 лет назад

Maybe install a back flow preventer if it does ;)

@Photostudioww 5 лет назад

Why didn't you leave the other valve, I would of left it. Cool video.👍

@Got2Learn 5 лет назад

It was due to be removed, and personally, I just close the valve to the house when I have a repair to do, maybe if it was a hospital or school, I would of reinstalled another valve, thanks for the compliment buddy, appreciate it ;)

@samr3637 5 лет назад

Your right I would have left valve in also 👍

@roadstar499 4 года назад

Hi ..i have a question... i have to solder a new out door 1/2 inch faucet since old one is leaking badly... i will be heating up new valve directly to solder... do i have to take appart valve and remove washers etc? and if so is it simple? i saw a couple on this where they did not ...one guy said a wet towel over fauct works or a gel... i what should i do the part was $7.50 and i only bought one and i would hate to have to redo a bad job...any suggestions are appreciated you seem to be the best plumber on youtube...thanks

@Got2Learn 4 года назад

Yes, remove packing to avoid burning the insides.

@roadstar499 4 года назад

@@Got2Learn yes i just did and put everything in a zip lock bag for tomorrow...thanks for the advice.

@Got2Learn 4 года назад

Good idea, you won't regret it :)

@pieterdbrown1952 5 лет назад

My problem: there is a constant drip/leak from the "anti-siphoning feature" you show in this video - (letting the water out etc.) - I can remove its' cap but can the (white) plastic part be removed? Or is there a piece missing under the cap? Annoying to say the least - (?)

@Got2Learn 5 лет назад

The water is coming out of the white thing?

@StrangeDuder 3 года назад

If you weren't converting to pex, can you go directly from copper to the silver fixture?

@Got2Learn 3 года назад

Yes you can!

@myownspiritlevel 4 года назад

Hydrant?

@davidpalmer5921 4 года назад

Any recommendations for a specific brand? This brand has terrible 1 star reviews. Anything besides Sharkbite?

@Got2Learn 4 года назад

Not that I know of. I was contacted by a company called "Aquor" and I still need to make a video on that, but their stuff seems pretty high quality, check their site out: aquorwatersystems.com/

@robertstout260 3 года назад

Sure you can get to the backside ,if not and it is soldered you have to cut open drywall .

@veggiepowered 2 года назад

I'am Your Newest Subscriber Great Videos

@Got2Learn 2 года назад

Awesome thank you!

@DJ_Driven 4 года назад

What type/brand of inserts did you use to secure?

@Got2Learn 4 года назад

The screws you mean?

@DJ_Driven 4 года назад

@@Got2Learn The wall inserts you used to secure the hose bibb to the wall @ 4:45. I was going to use 3/16" Tapcons, but the inserts you used look like a better option.

@Got2Learn 4 года назад

I just used two stainless steel screws and they worked super well honestly, no need for Tapcons.

@gordonshumway5653 3 года назад

Make sure to check to see if they decided to solder the damn thing instead of using threads. Went to unscrew mine and discovered it had been soldered in place.

@Got2Learn 3 года назад

Oh crap!

@NickCager 4 года назад

If only my house had a basement so I could do all that as you showed us....

@g4l430 4 года назад

I so agree! I've got to replace a tub/shower valve and all the YT videos show accessing from the back but behind mine is another tiled shower. I'm watching Got2Learn videos because he has the best description on how to work within walls. Sure wish this video showed how to do this within a concrete block wall...

@antoniogalluccio4213 2 года назад

How can this shut the water off inside? Can you cut one in a half and explain it in details for learning purposes please? I like the built in non return valve which saves time but I think you need a valve inside to shut the supply off should you service or replace the tap so that you don't need to isolate the mains for the entire premises

@lvhr6176 2 года назад

Can this sillcock be installed pointing to the side instead of down?, I know the answer is probably no, but I wanted to understand why, The old one I have is pretty low to the ground which makes it difficult to attach the hose.

@Got2Learn 2 года назад

No 👌👌

@lvhr6176 2 года назад

@@Got2Learn Why no lol

@Got2Learn 2 года назад

@@lvhr6176 the water needs to drain outside, not stay in the sillcock, or it defies the purpose of it being frost resistant :)

@Bytowngal81 3 года назад

Why did you convert to pex? Can this job be done completely with copper instead? I'm not sure that I trust pex in the long run.

@ryanneedham8820 3 года назад

Love how these videos never show the issues of replacing an outdoor spigot when you have a finished basement. Not every basement has pipes accessible

@Eastahtata 3 года назад

Measure from reference points like an edge of a window to find where to make an access hole for the wrench or a pex crimper. Also be ready to have a pan/ plug, and towels to catch any water. Open all your lowest faucets like in the shower to drain everything. I had a lot of water come out of the pipe after cutting it even though I had the spigot open for a while

@ytsux9259 2 года назад

I think my faucet's piping is underneath the house (crawl space). 😭 It's gross and scary down there! 🤦

@russcannon6725 Год назад

@@ytsux9259 You're a big boy. I'm sure the Boogie Man won't bother you while you're down there.

@avag6132 5 лет назад

Has to be potable dope remember! Also i would of thrown some polykin take on the pex if going thru concrete

@Got2Learn 5 лет назад

Well, it doesn't touch the concrete, so I am ok.

@CaptainEverythingHumorandMore 3 года назад

Some home repairs feel whelming and people hire out. Try it first, Chances are you will get it fixed save some money and learn as you go.

@xxwookey 2 года назад

You forgot to seal the hole on the inside. It's a big air-leak at the moment (probably, depending somewhat on the wall construction detail). A bit of foam in the hole, or a rubber pipe gasket over the pipe and stuck to the wall, would do the trick.

@SteelRhinoXpress 4 года назад

if i were to do this to my house knowing it has cpvc plumbing connected to my valve i'd break the cpvc off and end up turning it on and water would gush all over the place making for an expensive repair bill. lol

@captainkangaroo4301 4 года назад

Teflon tape and pipe dope. I bet you wear a belt and suspenders.

@Got2Learn 4 года назад

Lol

@mattmarion6442 4 года назад

It's common to use both.

@antoniogalluccio4213 2 года назад

Why don't you also sleeve the pipe to prevent mechanical damage to due small building vibrations called settlement?

@Mark-hu9tf 3 года назад

Are crimp fittings reliable?

@Got2Learn 3 года назад

Yes, if installed correctly!

@bushwalker2673 4 года назад

Hi was wondering if you have and any problems with this product so far? It has a few bad reviews but most likely its a install issue with the people who have problems. Thank you.

@Got2Learn 4 года назад

Never had any problems!

@mathiso01 5 лет назад

They are actually made so that the rear, where the water actually stops at, should be in a conditioned space. But it's better that what was there before.

@Got2Learn 5 лет назад

It's about 1" in back of the styrofoam, and I didn't feel like paying 5$ more for 2" more lol !!

@mlo7609 5 лет назад

How do you know what length to buy?

@Got2Learn 5 лет назад

I just took a rod and put it in the hole and marked it with a sharpie once the old one was out ;)

@mlo7609 5 лет назад

Just giving u a hard time lol

@Got2Learn 5 лет назад

;)

@erichutchison4938 5 лет назад

After all that and still didn't get the correct length. I guess your first year Apprentice

@mlo7609 5 лет назад

First week actually.....tomorrow I’m learning how to use a pipe wrench !!! Pretty stoked!

@Brownshabsfan Год назад

Have you had any problems with this hydrant leaking? I was considering installing one but the product reviews are not great at all!

@sammyg3697 4 года назад

Do you notice less flow with the next faucet from using and inner 90 instead of an outer 90?

@Got2Learn 4 года назад

Absolutely not :)

@WhizeCracker 3 года назад

ALL of my joints are sweated with solder I know this because I replaced one. My nephews were too. Unfortunately, he wasn't a RU-vid guy and he owned a pipe wrench. He didn't turn off the water supply and when he finally twisted it enough to break the copper pipe his basement started filling with water. Enough to ruin his carpet and some low-standing furniture. Also, the pressure I get coming into the house is stronger than 300 psi. That's what the plumber said when he replaced my hot water heater while I was in the hospital. I don't believe any Teflon hose would last and I don't want to lose the pressure because of my sprinkler system.

@scundoorsup5342 2 года назад

You are supposed to use the translucent spacer that came with the hose bib . It’s tapered to allow water to drain drain

@joeearley3351 4 года назад

Cheep plastic knob don't know about the rest of it but you will after a few years of use

@Got2Learn 4 года назад

I will what after a few years?

@gardeningpacificnorthwest6941 4 года назад

Ive never seen someone use tape and dope that's a first

@hempcacaogoji831 4 года назад

Gardening Pacific Northwest Here in Connecticut pretty much everybody does.

@kingokafor6215 4 года назад

An old pipefitter i worked with at Procter & Gamble did this

@louruet4745 3 года назад

I recently saw this for the first time as well

@saigyl9149 3 года назад

Would have kept the shutoff there in case anything went wrong with the new spigot

@Impaled_Onion-thatsmine 4 года назад

He did it for free to the neighbors spout because we needed water parts supplier is the job simple procedure really

@Got2Learn 4 года назад

huh?

@peterboissiere9684 5 лет назад

U didn't use a long enough frost proof,it needs to be in the home,not in the wall.

@Got2Learn 5 лет назад

It's inside we just don't see it because of the styrofoam ;)

@andreyyaromich8277 5 лет назад

Peter Boissiere hahaha he didn’t like your comment. Plus you still need a shutoff even if it’s non freeze. Now you have to shut down the entire house to service 1 tap, plus it’s code in most county’s

@SvenK-CAD 5 лет назад

def. need another shut-off valve as Andrey noted'

@evenflow3256 5 лет назад

@@andreyyaromich8277 he points to the shut off at the beginning of the video. As long as the inside of the house is warm the frost free is deep enough.

@andreyyaromich8277 5 лет назад

Even Flow that’s the main shutoff, he pointed to the original outside shutoff which he removed because he said he was converting to pex, (doesn’t make sense) ( converting to pex after the valve would have made sense) sooo I’m saying again no shutoff is installed to isolate this hydrant

@seven73ify 4 года назад

When turning off mine it still is running out of hose and I need to go turn it again tighter? Do you know why?

@Got2Learn 4 года назад

You have a new frost proof spigot or an old valve like I had?

@seven73ify 4 года назад

I have the anti syphon

@Got2Learn 4 года назад

Does it go below zero where you live?

@seven73ify 4 года назад

Frost proof

@seven73ify 4 года назад

@@Got2Learn yes it goes below zero sometime

@chrisaudi1593 2 года назад

tell me you're coming from quebec without telling me you're from quebec ... this guy accent haha

@Got2Learn 2 года назад

😁😁😁

@chrisaudi1593 2 года назад

@@Got2Learn au moins c'est bien expliquer ;) thanks

@chauffeurmarco 5 лет назад

Est-ce que c’est une invention québécoise?

@Got2Learn 5 лет назад

Maudite bonne question ca, mais je croit pas lol ;)

@chauffeurmarco 5 лет назад

Got2Learn on n’arrête pas le progrès! 🤓

@Got2Play 5 лет назад

Merci beaucoup ;)

@jrm2383 4 года назад

Removing your supply valve is a mistake

@scundoorsup5342 3 года назад

You don’t have to put a wooden wedge l use the plastic white spacer that comes with spigot , just slip it behind the collar on the outside before screwing to the wall, Einstein

@leebrowwski 4 года назад

Calisse, AIM solder? must be toxic!

@Got2Learn 4 года назад

95/5, not toxic.

@leebrowwski 4 года назад

@@Got2Learn Inside joke for Mtl Qc

@Got2Learn 4 года назад

Heheeee ;)

@guidedbygreen1480 3 года назад

Sillcock valve is too short your shutoff valve is not long enough to avoid the potential frost. Also, Why eliminate the original valve if you ever have to replace it again? Also plumbers tape and pipe dope is redundant

@keithwalker5078 Год назад

IMO you should do the normal one first and THEN do one with the pex added as this one is confusing and uneccessary

@virginia7125 3 года назад

You have idiots trying to open these 3 or 4 turns. This damages the O rings inside and the valve has to be removed & replaced. I've been through 3 of these. The old NIB, as it was called, lasted 50 years. Also, careful because Mr telephone likes to use the casing for ground. You may have to buy a ground rod or move the clamp inside. You can use the square styrofoam boxes on your nibs to save them. Also, they make heat tape for mobile homes to warm the line inside.

@raybod1775 4 года назад

Chrome faucets are not for potable water.

@Got2Learn 4 года назад

huh?

@raybod1775 4 года назад

If your pipe is not chrome plated on the inside, my comment doesn't apply. I found that label on a chrome sillcock faucet months after I bought it and saw the pipe was chrome plated on the inside. I didn't understand and found out chrome can be toxic. EPA sets limits of chrome in water to 6 parts per billion. I have no idea how much chrome can get into a water line if the faucet sits all winter unused.

@Got2Learn 4 года назад

Interesting, thank you for your input Ray :)