How to Replace Cabin Air Filter 98-02 Honda Accord

1A Auto: Repair Tips & Secrets Only Mechanics Know

Просмотров 209 тыс.

% 1 100

Shop for New Auto Parts at 1AAuto.com 1aau.to/c/142/j/cabin-air-filter
1A Auto shows you how to repair, install, fix, change or replace a dirty, dusty or clogged air filter. This video is applicable to 1998-2002 Honda Accord models.
This process should be similar on the following vehicles:
1998 Honda Accord
1999 Honda Accord
2000 Honda Accord
2001 Honda Accord
2002 Honda Accord
🔧 List of tools used:
• Phillips Head Screwdriver 1aau.to/okR/1AXAA00013
• 10mm Socket 1aau.to/oiS/1AXAA00017
• Ratchet 1aau.to/omz/1AXAA00016
Subscribe: ru-vid.com/show-UCVvE8kQTuZEykvMFZBVzftg
Check out our playlist:
Cabin air filter replacement: ru-vid.com/group/PL37d7oWG6wDCVy75j-nqwwdZDBSMEgd5R
Honda Accord 6th Generation 1998-2002: ru-vid.com/group/PL3A59CE18F41A1B03
For More Info visit us at 1aau.to/h/wm/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Авто/Мото

Опубликовано:

16 июн 2011

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 92

@1AAuto 3 года назад

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

@PickyOne 8 лет назад

He missed 2 steps: 1.removing the third screw for the knee panel which is located under the Radio. 2. Skipped removing the metal part that allow you to remove the filter straight without bending them. Newer filter like Fram breeze with carbon are hard to bend and may crack, so you need to remove that metal part. Other videos are more clear about this point.

@teenice894 Год назад

Gotta respect the people who do these how to's with one hand to help others.. thanks!!

@LeroyHeeneyWine 3 года назад

Thanks for making and posting. You just saved me a bunch of time and money. Please note viewer added comments regarding missed steps- makes it even easier!

@1AAuto 3 года назад

+LeroyHeeneyWine Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c

@1AAuto 12 лет назад

Thank you for visiting our auto repair channel on RU-vid.

@fogliner 12 лет назад

Thanks for posting this.Gives me the confidence to try this myself.

@DukeGeren 11 лет назад

Exactly correct. Took me 5 minutes to figure out why the hell the glovebox wasn't coming out when I found that screw on the center bottom tab of the glove box holding it in place.

@matthewsequoyah2665 Год назад

NOTHING is ever as easy at it’s presented. Especially when they leave out certain key steps ! ! 😡

@keepitsimple8 5 лет назад

When the filters are taken out, they are in a frame. You remove the old filters from the frame and insert the new filters into the frame(making sure the arrows on the filter and the filter frame both point to the left). In this video, the installer did not put the filters back into the frame before reinstalling the filters into the housing.

@1AAuto 5 лет назад

+KeepItSimple The main objective of this video was showing how to remove the glove box to get to the filter, which most people have trouble with. The rest is pretty self explanatory

@ronaleeciocco9455 8 лет назад

the replacement filters I bought fit perfectly in the frames, and the frames fit perfectly in the space, so I used them, as they surely seem to be meant to be permanent.

@1575murray 3 года назад

I was about to comment on this as well. The old filters come out of the frames so the new ones can fit into them and they are to be reinstalled (not the way this was done in the video).

@SerJorahBorealis 3 года назад

100% the frames are meant to be permanent. The effectiveness of the filters would be significantly reduced without them, as seen in the video (and when I tried without the frames) there is like a 1" gap.

@wolfgangzrx 4 года назад

Mine was owned by a smoker for 10 years,I'm hoping replacing this will help get the smell out! Thanks!

@profwaggstaff 10 лет назад

Very helpful, thanks. My 1998 Accord LX had an additional screw on the left side of the knee panel. I had to remove the small square panel above the storage tray, forward of the shift knob. Then remove the one screw holding the upper left corner of that knee panel. Also, I think you can install the new paper filters inside of the plastic frames you removed. In your video, you didn't seem to replace the plastic filter frames. All in all, it was easier than I thought.

@1AAuto 10 лет назад

Thanks for watching. Have a great day! 1aauto

@gailgrove 12 лет назад

Thanks! I've been looking for a video on how to do this. Not sure why Honda had to make it so complicated to do...

@lilin88 12 лет назад

thanks alot mike for the video... why would anyone dislike this video when you are just trying to help out the community? but thanks again

@stevetilk4926 8 лет назад

Thanks. You just saved me a bunch of money.

@1AAuto 8 лет назад

+Steve Tilk We're so glad we could help! For other viewers looking to do the same repair, please check out our item here: www.1aauto.com/1A/CabinAirFilters/Honda/Accord/1ACAF00047?RU-vid&CTA%20Comment&ATony

@1AAuto 12 лет назад

We currently do not have an auto repair video that shows this repair on a right hand drive application. It could be in the same position on the other side of the car if there is a cabin filter.

@_Bee305_ 12 лет назад

video is too raw, followed same exact steps. took like 15 minutes and had no problems.Thanks!!

@GerardoAHO 10 лет назад

extremely helpful! Thanks a lot!!

@1AAuto 10 лет назад

Thank you for watching! 888-844-3393

@Chromedome-ss6mg 4 года назад

I hope this makes my car smell better. I just ordered them

@1AAuto 4 года назад

+Chromedome 2020 Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

@jorgeyanez6271 11 лет назад

Thanks! Autozone told me it was behind the glovebox but that was it. I would have taken all kinds of stuff apart if i had not seen this.

@Fuego-yu2ru 5 лет назад

After unscrewing the three Phillips head screws under the box, check below the center one for one more on the bottom bracket. Video doesn’t mention it.

@rico00042 11 лет назад

Thanks for the preview! Looking forward to doing this filter replacement next weekend. :D

@gumman741 12 лет назад

Thank you alot im 13 and i did it with out any help except your of course i think my brother will be very pleased because he hasnt had time to do it if i can do it anyone can do it!! :D

@1AAuto 12 лет назад

@MsClaudiaMarie Thank you for visiting our auto repair channel on RU-vid.

@luvondarox 3 года назад

Thank you for posting this! We were momentarily flummoxed by an extra screw holding the glove box in place (finally noticed the punk) and the rest of it was easy thanks to your tutorial.

@rico00042 11 лет назад

I recently pulled a dead mouse out of my wife's fan blades. Honda made the fan a snap to get out, and the smell went away with the mouse. Might be worth look if your problems persist despite running the heater on hot for a while. Don't wait til his nearly decapitated head starts hitting the frame whack whack whack (like she did) unless you like using pliers to remove the dried bits. :P

@jamesking8593 10 лет назад

Hi, thanks very much for helping with all you do. Please let me know if the 1997 accord is the same as the 98 shown in the video. Thanks a lot.

@1AAuto 10 лет назад

Your 97 may not be equipped with one. If you have the dealer run your VIN number they could tell you. Hope this helps you out. 1aauto.com

@Maximaroman 9 лет назад

thanks!!! really helpful video.

@jesbsnrn Год назад

big help thanks. just a comment. please , lets be careful pulling out the glovebox . before pulling out reach behind it. there is actually something hindering it from coming up and out. just push it out of the way for smoother removal

@Clearanceman2 2 года назад

Is there a way to check the condition of the filter without taking the whole thing apart?

@666drpat 9 лет назад

so usefull.... thanks !!

@1AAuto 9 лет назад

+666drpat We're glad the video helped you out. Thanks for watching. 1aauto.com 866-403-3393

@scottgerweck1783 12 лет назад

WARNING--Some accords from this era have a couple more screws than shown in this video which must be removed to remove glove box assembly. My 2000 Accord SE had an additional screw under a pop-off cover in the center console area which attached the panel below the glove box; also there was another screw (lower than the three he removes) which needed to be removed to release the glove box.

@1575murray Год назад

On my car the mechanic who previously worked on the car left the screw under the radio out and put it in the glove box. He also left out one other screw which I eventually replaced. Needless to say he doesn't work on my car anymore and I have replaced the cabin air filters two or three times myself saving me a lot of money. I remove the lower brace as it makes it easy to pull the filters straight out to avoid breaking the plastic frames.

@l3chevalier 9 лет назад

Very nice! Just subscripted. Does the 1995 model has cabin air filter as well? Thanks!

@1AAuto 13 лет назад

@avsdavidt1 The 1994 Accord didn't come equip with one.

@Sonyag1 12 лет назад

Excellent video. I did it myself. And to think that Honda would have charged me $150 to do a job that noly takes 15 minutes tops.

@hutch430 13 лет назад

Thank you for the video.

@lisad476 4 месяца назад

Ty very much

@MrEferrell 12 лет назад

Now you need to do a 2002 model. It is DIFFERENT. It has an extra screw at the very bottom of the glove box. I noticed in your video the bottom screw was missing. The panel crossmembers are different also, and require removal because one of them holds the door in place.

@1575murray Год назад

Many mechanics leave some of the screws out to save time and try to beat the flat rate hours so they can make more money. The missing screws go to their collection.

@Antiliblife187 5 месяцев назад

Mucho’s gracious!

@1AAuto 13 лет назад

@MrAlexdesousa The 1993 Honda Accord wasn't equipped with one.

@cdiazcetina 6 лет назад

There is a plastic housing on the original filter. the ones you buy replace the old ones but you must reuse the plastic mold on the old one or else the new filter will just jiggle around

@smokum0 6 лет назад

Pretty awesome how you have to tear half of your car apart to change a filter. Top notch engineering right there!!

@victimsoul 4 года назад

WARNING!! WARNING!! There is a screw that holds the glove box in place. It is located at the bottom middle of the glove box. At 2:36, you can see the metal retainer it goes into. This little missing step caused me to dismantle my glove box thinking it was just stuck on something.

@karlhungus5554 Месяц назад

1:08 - There seems to be a step missing before removing this panel. It's first removing the panel in the forward pocket of the center console.

@luisparamo9402 4 года назад

Will replacing this filter help to get colder ac?

@1AAuto 4 года назад

+chepepewis elevan Thanks for watching! It might improve air flow, but it will not make a noticeable difference in the temperature.

@luisparamo9402 4 года назад

@@1AAuto thank you great video

@deeboi5720 4 года назад

I noticed there was no plastic filter holders you just put the filters in? Did this car not come with them.

@papo862 4 года назад

whenever they got replace before probably didn't know and threw them out lol

@djsnitch48 11 лет назад

i have a 97 honda civic lx, it sat for a year. I finally got it on the road. I so I turned on the heat and this god awful smell keeps coming out. How do I fix, and does this year of car have cabin air filter?

@hp11208 13 лет назад

cool mike

@elmano04 11 лет назад

Does the 90-97 Accord have Cabin Air Filters as well? lf so, how to replace it?

@ashadiamir 5 лет назад

I try to find the cabin air filter on my 6th Accord 2001 but I didnt found it. There is no slot like showing in the video. Just a black huge box without any slot. How to replace it then?

@1AAuto 5 лет назад

+Ashadi Amir Refer to your owners manual. Double check there. There may be some slight differences between models

@MrHeadshot1982 7 лет назад

I got do this to my prelude.

@MichaelAntus 11 лет назад

Thanks...

@jeehooahn3524 5 лет назад

thanks.

@LynnD-s1i 25 дней назад

Mine had a 4th screw below the 3 screws on the bottom of glove box

@windo5 12 лет назад

what about a right hand drive ? thanks

@1AAuto 12 лет назад

Thanks for watching. Have a great day! 1aauto.com 888-844-3393

@damasyudhistira 4 года назад

I cant find my cabin filter on my 6th gen accord. My own right hand drive

@futurepoliceman 10 лет назад

i removed all the screws but my glove box will not come out at all. Any ideas?

@1AAuto 10 лет назад

There could be a strap, or possibly a hinge holding it in place. Hope this helps you out. 1aauto.com 888-844-3393

@cameronkrome 10 лет назад

In case you didn't already get it, there's an additional screw below the bar with the three across, right in the center. Messed me up too... :-/

@Murp268 4 года назад

Thanks, I'll breathe the dirty air. What a PITA for a filter.

@adrianpalomino6450 10 лет назад

Doesn't anyone know how to remove that square storage panel for a 2000 Honda Accord SE? I tried just pulling it out but it won't really budge and I don't want to break anything

@1AAuto 10 лет назад

Thank you for watching. Unfortunately we do not have a video for your application. We will keep this repair in mind for future videos. 888-844-3393

@GrannieDaigle14 11 лет назад

My 2001 had the extra screw too! Lol

@rennaldobrown7087 Год назад

I only see the black box but no filter

@PhatkatCollections 2 года назад

This completely wrong. You do not put the filters in without the cage . The filters need to be put inside the plastic cage then inserted. Your seriously a mechanic?