Тёмный

How to Replace Clutch Kit 2006-2011 Honda Civic 

TRQ
Подписаться 517 тыс.
Просмотров 85 тыс.
50% 1

Shop for New Auto Parts at 1AAuto.com 1aau.to/c/126/b...
This video shows you how to install a new TRQ clutch kit on your
In a manual transmission vehicle, the clutch is responsible for disconnecting the engine from the transmission so that you can change gears. The rest of the time, the clutch transfers power from the engine to the transmission in order to drive the vehicle. The clutch is a friction device, and will need replacing at some point, depending on driving conditions.
This process should be similar on the following vehicles:
2006 Honda Civic
2007 Honda Civic
2008 Honda Civic
2009 Honda Civic
2010 Honda Civic
2011 Honda Civic
Tools you will need:
• Flat Blade Screwdriver 1aau.to/o78/1AX...
• Phillips Head Screwdriver 1aau.to/o78/1AX...
• Pry Bar 1aau.to/orG/1AX...
• 17mm Wrench 1aau.to/osS/1AX...
• 10mm Socket 1aau.to/oXM/1AX...
• 12mm Socket 1aau.to/o7Q/1AX...
• 14mm Socket 1aau.to/o7Q/1AX...
• 15mm Socket 1aau.to/o7Q/1AX...
• 17mm Socket 1aau.to/o7Q/1AX...
• 7mm Socket 1aau.to/oXM/1AX...
• M10 12 Point Bit
• Trim Tool Set 1aau.to/own/1AX...
• 1/2 Inch Impact Gun 1aau.to/ofR/1AX...
• 3/8 Inch Impact Gun
• Ratchet 1aau.to/oadZ/1A...
• Socket Extensions 1aau.to/o7Q/1AX...
• Torque Wrench 1aau.to/oJG/1AX...
• 3/8 Inch Wrench
• Drill
• Anti-Seize Grease
• Brake Parts Cleaner
• Bungee Cord
• Cloth Rags 1aau.to/okK/1AX...
• Liquid Thread Locker
• Transmission Fluid
• Bucket
• Floor Jack 1aau.to/our/1AX...
• Jack Stands 1aau.to/osK/1AX...
• Pick 1aau.to/ooE/1AX...
Subscribe: / @trq
Check out our playlist:
Honda Civic 2006-2011 8th Generation: • Honda Civic 2006-2011 ...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Опубликовано:

 

15 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 29   
@TRQ
@TRQ 2 года назад
√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*
@AMGELECTRONICS
@AMGELECTRONICS 2 года назад
Hello good evening Nice video perfect explanation ! How much in USA a job like that
@mitchellboyes5299
@mitchellboyes5299 Год назад
This took me a lot longer than an hour lol, about 7 taking out the trans, half hour on clutch, and about 12 hours putting back together with torquing and lining up. I reccomend to tie your steering rack up to your struts (zinging tight to the point where it feels like the tie rods are going to bend) using tie downs so the splines in the steering rack don’t disconnect from the steering column. If your rack falls out of place your going to perhaps need to get it realigned. I fortunately did not have it disconnect but have heard horror stories about it lol
@thericerrocket7735
@thericerrocket7735 2 года назад
Hey it’s taken me far to long to find this video I’ve been doing a engine swap on my r18 It’s taken almost a year a lot going on, this video might just save my life tho I’m putting a new exedy clutch kit on today!!
@23for82bigs
@23for82bigs 7 месяцев назад
Amazing video. I now feel confident I can change the clutch in my 8th gen si!
@johnathonfoster1325
@johnathonfoster1325 Год назад
Yo thank you I for posting this it helped me do a whole trans swap
@domingson
@domingson Год назад
Thank you! I will be doing exactly the same by myself for the first time. Just one question. Were you supposed to have the flywheel resurfaced?? I heard from a mechanic that it should be either replaced or resurfaced. Thank you again
@McDzy
@McDzy Год назад
Would this be similar to a 06-11 Honda Civic Si? Or just base models? EX, LX, DX?
@RipThatVette
@RipThatVette 11 месяцев назад
Big help. Thanks
@isaiahcrowell4819
@isaiahcrowell4819 Год назад
I just did this whole job and I have no pressure and can't engage and disengage the clutch. I realized my power steering is disconnected too as it stretched. Would this have anything to do with it? Do I just need to bleed the clutch?
@easylearn9350
@easylearn9350 Год назад
Great job; thanks for sharing that. Q: Are all 8gen 2006-2011 civics have the same transmission? particularly hatchback 1.8l EU models with available models in the US? I noticed a difference in the filling-up bolt (with/ without sucket); please correct me if I am wrong. :|
@wethebest777
@wethebest777 2 года назад
Is this 1.8L engine? Wht there is no pilot bearing at the flywheel?
@ll.7927
@ll.7927 Год назад
There is b ur it’s not really a bearing
@reverendosaquic7611
@reverendosaquic7611 Год назад
What's the name of the stand tool he used to hold the frame
@PortugueseFlyingStew
@PortugueseFlyingStew Год назад
How long did it take to complete from start to finish?
@spacejam5394
@spacejam5394 Год назад
Is this for base model or SI????
@gavincooper478
@gavincooper478 11 месяцев назад
Why do some cars not come with pilot bearing? My pilot bearing is shot and thinking about replacing
@ivan.kurkakov
@ivan.kurkakov 2 года назад
What ring was installed inside the flywheel?
@comeconcon569
@comeconcon569 Год назад
How long does it take to replace a clutch and flywheel?
@beeradfpv
@beeradfpv 2 года назад
you don't resurface the flywheel?
@BigPackets
@BigPackets Год назад
anybody did this without removing the subframe?
@bryce2113
@bryce2113 Год назад
You didn't replace or resurface the flywheel?!?!
@adnerflores2827
@adnerflores2827 Год назад
teacher, what was the reason for the change of clutch???? what faults did the honda civic have....
@howtoshootstraighthtss4948
@howtoshootstraighthtss4948 Год назад
How come u didnt replace the flywheel?
@cjason7202
@cjason7202 11 месяцев назад
Do you not have to bleed the clutch ?
@AbdullahKhan-nb6lf
@AbdullahKhan-nb6lf 6 месяцев назад
Distel engine problem
@reverendosaquic7611
@reverendosaquic7611 Год назад
Hi
@TRQ
@TRQ Год назад
+Reverendo Saquic Thanks for watching our video! 1aau.to/m/Shop-TRQ
@bolts5994
@bolts5994 2 месяца назад
FFS.....why in the world can't they design a clutch that is easy (easier) to replace?? Jesus H Christ
Далее
2007 Honda Civic i-VTEC 1.8L Petrol Clutch Replacement
51:20
5 Tips For Replacing A Clutch
7:04
Просмотров 2,7 млн
Honda Civic Clutch Replacement!! (Si)
53:25
Просмотров 84 тыс.
2006 Honda Civic 1.8L Clutch Replacement!(FULL)
36:48
01-05 Honda Civic Clutch Replacement
53:35
Просмотров 374 тыс.