How to Replace CV Axle Assembly 2011-2016 Hyundai Elantra

Подписаться 529 тыс.

Просмотров 68 тыс.

50% 1

Buy Now!
New CV Axle Assembly from 1AAuto.com 1aau.to/ia/1AAC...
This video shows you how to install a new CV axle assembly in your 2011-2016 Hyundai Elantra. A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications.
This process should be similar on the following vehicles:
2011 Hyundai Elantra
2012 Hyundai Elantra
2013 Hyundai Elantra
2014 Hyundai Elantra
2015 Hyundai Elantra
2016 Hyundai Elantra
Tools you will need:
• Pry Bar 1aau.to/oHI/1AX...
• 19mm Wrench 1aau.to/oKB/1AX...
• 14mm Socket 1aau.to/oaZZ/1A...
• 17mm Socket 1aau.to/oaZZ/1A...
• 19mm Socket 1aau.to/oZu/1AX...
• 21mm Socket 1aau.to/oZu/1AX...
• 32mm Socket 1aau.to/obM/1AA...
• Ball Joint Press
• CV Axle Shaft Popper Tool 1aau.to/od/1AXA...
• Pliers
• Torque Wrench 1aau.to/oajM/1A...
• Copper Anti-Seize
• Cotter Pin
• Rust Penetrant
• Drain Pan 1aau.to/os2/1AX...
• Floor Jack 1aau.to/oPc/1AX...
• Hammer 1aau.to/oKE/1AX...
• Jack Stands 1aau.to/oKM/1AX...
• Large Hammer 1aau.to/oKE/1AX...
• Pole Jack
• Punch
• Sledge Hammer 1aau.to/oKE/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Опубликовано:

29 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 56

@TRQ Год назад

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

@jerrys.1910 9 месяцев назад

This girl genuinely knows the little tricks associated with individual tasks demonstrating years of experience. Well done! Respect.

@cosimodalessio642 Год назад

Great video! Thanks! Now, if I were only thirty years younger. 😬

@bythethoartfoo 11 месяцев назад

why she so rough tho

@mohammedsuboh1420 Год назад

Your method of disassembly and installation is perfect, and you have high experience and confidence. Greetings to you

@TRQ Год назад

+Mohammed Suboh Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ

@Cubano1hero Год назад

This is exactly what I needed!! I cant wait for more elantra part installation videos!

@francobarberis3126 3 месяца назад

I’ve seen tons of mechanic videos, this one is definitely one of the best ones.

@manhuerta19 Месяц назад

Am i the only one who noticed the bended brake shield blate?

@danieldelosreyes6340 Год назад

Esta señora no sabe nada de los cuidados de las piezas, hiso muchas cosas inecesarias para sacar el eje de la transmicion. Alguien enseñele primero.

@dans364 3 месяца назад

I need the axel popper for a 2017 Hyundai Accent. It needs to be 2.5" or 63 mm. Do you sell that? Does anyone sell that?!? Thanks.

@ilanpro 8 месяцев назад

it is easier to remove the strut bols

@TTBOY-mb8tb 13 дней назад

Great video! Your tone of voice and your speech is soothing.

@irisbaez1972 5 месяцев назад

That lock clip at 7:41 should be at 12 o'clock position no at six.

@markrichards2634 6 месяцев назад

Well done. I would suggest maybe 5 seconds to emphasize safely raising or jacking the car up. Also, a list of the tools used would be EXTREMELY helpful.

@Braveheart69 3 месяца назад

Very impressive "how to" video! Better than any other automotive video I've ever watched to help me repair my car or H1 HUMMER. Great job!

@zee9493 6 месяцев назад

Is it possible to provide us about a reason to change it, are the axle make noise or some problem with gear! because I have same model of car that’s give me opportunity to maintain the axle before I lose it. Thank you for your video it is have a lot of benefit❤.

@user-ku3wp1jd6h 6 месяцев назад

ممتاز

@Smile-uwokeup-2day 11 месяцев назад

I have removed the inside axle cv seek in the chamber when I was trueing to removed the seal of my 2012 Elantra . How do I get that inner chamber seal now one back in . Or is this transmission inner problem I started

@onlywenilaugh6589 11 месяцев назад

Why take off the ball joint instead of just the strut bolts? Ball joints typically the hardest to remove and usually damage them. Another video says the opposite on the split on the ring, they say have the gap on top to stop the ends of it from binding:)

@jg1468 Месяц назад

I just did it! Went very easy i put the ring on the bottom like she said went straight in

@Smile-uwokeup-2day 11 месяцев назад

I have 2011 Elantra. Your doing a 217 torque set for cv axle nut . What yr car this vid she does here .

@Joseph0223 Год назад

Thank you. I wasn't doing this project on my car but you show me something to check out while under car. Engine and transmission mounts.

@DrChim_Richels 3 месяца назад

Great video! I used this for the most part, but since I was also changing the struts I was able to not have to deal with the ball joint. I’ve seen other videos saying to place the gap in the washer at the 12:00 or use grease to keep it centered. I tried the 12:00 advice and it didn’t work, then spun it like she says and it popped in nice and easy. Also, was able to get the passenger side out without removing the trans mount. Now, time for an alignment.

@TRQ 3 месяца назад

+@TF5598 Thanks for watching our video! 1aau.to/m/Shop-TRQ

@brandonward530 7 месяцев назад

Is this similar to a 2010 Hyundai Elantra too?

@ConnieJoMalone 11 месяцев назад

tq-wrench with a 19" crows foot if itll fit for that ball joint.

@erikcaban2727 Год назад

The hyundai elantra 2016 need it 217 ft-lb for the axle nut ?

@mosdiy8096 Год назад

Would this be pretty similar to a 2020 Elantra?

@rodey6594 Год назад

Crow foot or dogbone will torque that. Great work by the way👍

@krysietheile8952 Год назад

Is this the same way for a 17 Hyundai Elantra?

@princessbutterfly1042 Год назад

does this also include a 2010 hyundai elantra as well?

@kootahmed5224 Месяц назад

❤❤❤❤❤❤

@Smile-uwokeup-2day 11 месяцев назад

How do I get bolt out that spins with the bolt here

@Curmudgeon1685 Год назад

Wow, no bs like a lot of boys, clean, thorough, and professional presentation! Great work, lady! I'll trust my car with you anytime.

@maxtrap1947 8 месяцев назад

Outstanding. Thank-you.

@hugolob9811 11 месяцев назад

Ken you trying Orisontal with the tool to remove and not need remove extra parts

@TRQ 11 месяцев назад

Thanks for watching our video! 1aau.to/m/Shop-TRQ

@WilliamVG 11 месяцев назад

Is the 2014 Hyundai Accent same design?

@TRQ 11 месяцев назад

+William van Gils This procedure might be different for your application. We do not currently carry the part you need or have a how-to video for this particular year, make and model. Thank you for asking! 1aau.to/m/Shop-TRQ

@utahagentz 10 месяцев назад

I think your rotors are on reversed

@mehmetinseruveni9102 7 месяцев назад

Mükemmel 🎉

@Phone-sh7jg 11 месяцев назад

How much is that job?

@Tanjawi5368 3 месяца назад

Thank you 🎩

@daviddunn747 5 месяцев назад

Excellent video

@Coodeville Год назад

Outstanding video!

@antuliolopez3222 Год назад

swivel is priceless.

@jonnieb4 10 месяцев назад

You're the best

@nachomolina2144 9 месяцев назад

Thank You.

@antuliolopez3222 Год назад

Outstanding !!!

@leonardthelion9045 6 месяцев назад

Thanks!!!

@elrofaeigadala 7 месяцев назад

Good job’s

@BLACKPHOENIXRIZIN 7 месяцев назад

Thanks!

@chrishartwig Год назад

Thank you!!!

@PedroMartinez-nv7mz Год назад

Great job

@blphnx 4 месяца назад

1:27 Hard to take this video seriously after watching this person mangle the once perfectly straight brake rotor backing plate like a boss. I wonder now how often things like this actually happen behind the scenes.