How to Replace Drivers Side Leaf Spring 2007-2013 Chevrolet Silverado 1500

Подписаться 532 тыс.

Просмотров 15 тыс.

50% 1

Buy Now!
New Leaf Spring from 1AAuto.com 1aau.to/ib/GMSR...
This video shows you how to install a new leaf spring for your 2007-2013 Chevrolet Silverado 1500.
This process should be similar on the following vehicles:
2007 Chevrolet Silverado 1500
2008 Chevrolet Silverado 1500
2009 Chevrolet Silverado 1500
2010 Chevrolet Silverado 1500
2011 Chevrolet Silverado 1500
2012 Chevrolet Silverado 1500
2013 Chevrolet Silverado 1500
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa4h/1A...
• Pry Bar 1aau.to/oJm/1AX...
• 10mm Wrench 1aau.to/oLV/1AX...
• 19mm Wrench 1aau.to/oLV/1AX...
• 21mm wrench
• 24mm Wrench
• 10mm Socket 1aau.to/oaNe/1A...
• 15mm Socket 1aau.to/oa5x/1A...
• 19mm Socket 1aau.to/o3p/1AX...
• 21mm Socket 1aau.to/o3p/1AX...
• 24mm Socket
• 8mm Socket 1aau.to/oaNe/1A...
• Trim Tool Set 1aau.to/oVI/1AX...
• 1/2 Inch Ratchet 1aau.to/o3p/1AX...
• 1/4 Inch Ratchet 1aau.to/oaNe/1A...
• 3/4 Inch Drive Ratchet
• 3/8 Inch Drive Ratchet 1aau.to/oa5x/1A...
• Torque Wrench 1aau.to/oanr/1A...
• Gloves 1aau.to/oAW/1AX...
• Safety Glasses 1aau.to/ouL/1AX...
• Wire Ties
• Assistant
• Floor Jack 1aau.to/oQS/1AX...
• Pick 1aau.to/oEF/1AX...
• Punch
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Опубликовано:

4 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 9

@JT-tz5hp Год назад

Its so much better for a diy guy without a lift to pull the pan/box or whatever name you call it in your neck of the woods, off the truck. 8 bolts. Gives you full access to all the rusted bolts and the 2 inches of caked mud covering the top of your gas tank

@robpaul7900 4 месяца назад

All you need to do is sawzall the bolts off and no need to drop tank.

@NXT_LVL Год назад

Guess dodge wasn't the only bright idea in the department of "drop the tank to replace Driver side leaf springs"

@johnhamilton6205 Год назад

or you can take the driver side bolts out of the bed and loosen the passenger side, lift the driver side up and prop it up with a small jack stand, disconnect the fuel fill hose first of coarse before you raise driver side bed, disconnect the hoses to the fuel tank from above and drop the tank! easy peasie!