How to Replace Exterior Door Threshold

Подписаться 546 тыс.

Просмотров 294 тыс.

50% 1

In this video, I replace my garage exterior door threshold. I just moved into this house and this was something that had been bothering me since we did our first house inspection. In my last house, during every remodel that I completed, I made sure that it was sealed up tight so that no drafts or unwanted rodents could make their way inside. On one side of the threshold, you can tell that mice had made their way into the garage and I wanted to make sure that they didn't make their way into the house. For the first project of the house, it went smoothly and quickly. That’s not always the case but I am glad to have not found any surprises… yet!
• How to Replace Exterio...
• How to Replace An Exte...
• How to Replace Rotted ...
• How to Repair Rotted D...
• How to Replace Door Sw...
• How to Remove a Door f...
• How to Fix a Sticking ...
Join this channel to get access to behind the scenes videos:
/ @thefixerhomerepair
• Subscribe on RU-vid: bit.ly/Subscri...
• Second Channel: / @thefixerhomerepair2
• Facebook: / thefixeronyoutube
• Instagram: / thefixeryoutube
• TikTok: / thefixeronyoutube
• Website: www.thefixerho...
• Patreon: / thefixer
• Amazon store: www.amazon.com...
*As an Amazon affiliate, I earn commission on qualifying purchases.
Exterior door threshold- amzn.to/45btbGs
Hammer- amzn.to/3wob7fv
Rubber mallet- amzn.to/3R0WzJZ
Drill bit set- amzn.to/4atDdnH
Hammer drill- amzn.to/3QDlXVF
Reciprocating saw- amzn.to/3UPCCbc
Reciprocating saw blades- amzn.to/4dw4w3k
Pry-bar- amzn.to/3QGwtvp
Putty knife- amzn.to/4boN4MR
Construction glue- amzn.to/4bcf3PI
Caulking gun- amzn.to/3ybTLTC
Evolution - amzn.to/44PvVcJ
Tape measure- amzn.to/4dtRROn
Tap con screws- amzn.to/3WzG0rZ
Screw driver set- amzn.to/4baB417
Shop vac- amzn.to/3QCSiw5
(Affiliate links)
DISCLAIMER:
This video and description contains affiliate links, which means that if you click on one of the product links and make a purchase, I will receive a small commission at no extra cost to you. This helps support this channel and allows me to continue to make videos like this. Thank you for your support!
Videos produced by The Fixer are provided for informational purposes only. All material provided within this video is for informational, educational, & entertainment purposes only. Some of these projects, materials, and techniques may not be appropriate for all ages or skill levels. Please use all safety precautions while following any instructions or concepts provided by this video. Viewers must be aware that by doing projects on their homes they are doing it at their own risk and The Fixer cannot be held liable if they cause any damage to their homes. It is the sole responsibility of the viewer to educate themselves on their local codes and regulations before undertaking any sort of project. Always have safety in mind and have fun!

Опубликовано:

4 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 246

@TheFixerHomeRepair 4 месяца назад

Buy an exterior door threshold here- amzn.to/45btbGs (affiliate link) Subscribe to my channel: bit.ly/SubscribeToTheFixer Thanks for watching! 😃

@ronhanish 3 месяца назад

Screen door too,help keep water out

@srg3798 5 дней назад

GREAT VIDEO! Perfect explanation. Perfect videography. Excellent commentary. AND you even wear your hat the right way.

@-Kreger- 3 месяца назад

Man I’m glad you kept the threshold centered. Hate when people don’t take that into consideration

@Bohnzye 9 дней назад

Great how to video, Straight on, No nonsense . Thank you!

@madcatjo 4 месяца назад

LOVE these "small job" videos! I'm not looking to replace a whole kitchen, but theres's always things that need fixing around the house. One thing extra that I would have done is hit the rotten door jambs with some wood hardener.

@JamesLeatherman 4 месяца назад

Whoo hoo!! First new house project! I was really looking forward to this.

@laruesiens8090 Месяц назад

Coming from a senior single female, your just the site I need. Thank you!!

@larnold7614 5 дней назад

Mack sent me. He is right, your channel is good!

@billvojtech5686 4 месяца назад

I would cut off the bottom 3-5" of the rotted door jam and replace it with either pressure treated wood or some kind of plastic trim, like Azek.

@TheFixerHomeRepair 4 месяца назад

Yeah you could totally do that but at that point I would rather just replace the door... which I will be doing, eventually.

@rogerwhiting9310 3 месяца назад

I find that the dry rot that you were probing with your screwdriver tends to grow. If I wasn't going to replace the whole door...I would at least cut a lot of the rot away and put bondo on it. Bondo seems to encapsulate the rot pretty well. I also would buy a threshold that used pvc instead of wood. Wood always rots in a threshold..especially with closeness to the ground.

@percyfaith11 3 месяца назад

@@TheFixerHomeRepair fixing that rot with pvc or an epoxy is a whole lot cheaper and easier than replacing the door.

@kellyvcraig 3 месяца назад

Keep in mind, shrinking and expanding of plastics may surprise you.

@rogerwhiting9310 3 месяца назад

@kellyvcraig the bondo works well in my experience. Saw it on This Old House a long time ago

@quartzofcourse 4 месяца назад

Well I didn’t give my garage threshold a second thought with the wood trim around it rotting away from lack of gutters, but this video made me realize that my threshold was installed backwards! Thanks for the video showing me I have even more to fix now haha

@billarenz2719 3 месяца назад

I like how meticulous you are in your repair/ replace videos are. Thanks for the great videos, please keep making them.!

@ChaiLatte13 4 месяца назад

I didn't even know you could buy a door threshold like that! Thank you for these videos. Edit: I had a snake get in under a rotting door threshold, so it can be much worse than mice. lol

@SeeItLikeItSub2It 4 месяца назад

Yes, Lowes has them in the Hardware section.

@Kaufeetimevideo 3 месяца назад

The snake was after the mice!

@c50ge 3 месяца назад

Cuttin aluminum, plastic, and wood I use my circular saw with a 60 tooth carbide blade. Wear a full face shield or expect a little shrapnel. Your videos are exceptionally explanatory! Anyone should be able and confident to fix their problems after watching your videos. Thank you.

@pepegramirez9338 4 месяца назад

Good video! I don't expect any Threshold replacement any time soon, but very informative as always!! thank you for sharing!

@christiemay4444 4 месяца назад

Perfect timing! Something I need to do on both my front and back doors. Thank you!

@jeffweber8244 4 месяца назад

I had to do that repair once. In place of the piece of wood underneath that always rots and gets eaten, I milled a matching piece of PVC lumber on my table saw.

@rickschweizer935 3 месяца назад

Nicely done🙂 Your videos have enabled me to understand and repair several itmes around our house. Thank you!

@PegAMurphy 4 месяца назад

great video Matt as always I'm looking forward to all the new house tweeks 💕👍

@reallunacy 4 месяца назад

I've got a replacement threshold sitting in my shed that I've been procrastinating on installing. I guess this is my reason to get to work.

@T.E.P. 3 месяца назад

518k subs June 8, 2024!!!! Don’t forget about us little guys that were here when you were at 35k which is STILL impressive Thanks for the years of vids

@ninabooker2904 3 месяца назад

Matt has the construction skills and Mrs. Fixer has mad awesome closeup camera skills. 👍👍❤️❤️❤️

@T.E.P.. 3 месяца назад

Yeah man!!! Thanks for all these vids for all these years ... 519k subs Thursday June 13, 2024. Ya BIG DAWG! It's been a blast to see the success

@BrianBarbera-o9k 4 месяца назад

So I see you start your first repair project on your new home. Good job, Fixer.

@evelyn_r 3 месяца назад

loL "A little sandpapering.... a LOT of sandpapering" 🤣 hope you sealed it afterwards LOL thanks for another both educational and entertaining video~! ❤❤❤

@nhrider88 4 месяца назад

Another great project. I would have left the burn mark. Makes it unique and gives it character. Look forward to more "new home" content.

@JeffpRRR666 Месяц назад

Thank you for this, I have a much smaller Threshold then you but you did answer my question regarding my new door sweep by confirming the good idea to cut/trim from both ends to center the screws!

@TheFixerHomeRepair Месяц назад

Awesome! Happy to help. Good luck with your threshold!

@brucehampton1545 2 месяца назад

My shed door is a mess. Threshold and casing is separating and I have to stand on the threshold to shut the door so one of these days before winter I need to fix it. Not sure what came apart but threshold is definitely loose. Thank you for video. Very thorough and no distractive noises.

@ca6177 4 месяца назад

Nice work! Glad you're tackling small projects to begin with in your new home!

@seanysean6183 Месяц назад

Great vid, I have two thresholds that are exactly the same as you just fixed. This helps out a ton.

@mayradiaz2219 4 месяца назад

Excelente tus videos aunq no les entiendo me encantan ver y sacar ides ❤saludos desde veracruz México

@josepholayas474 3 месяца назад

I am sure silicone caulk has a place to be used but I've not found one on a house. I worked in a research lab of a major door manufacturer and scientifically tested caulks and adhesives continuously. Silicone is a great adhesive but it has NO shear strength. Not something you want to revisit with a later repair. There are better products. Squiggly lines of construction caulk leave gaps. Take advantage and run a straight line at the exterior to help with water intrusion also get a continuous seal across that front. I also agree with replacing the bottom of those jams. 'while you're in there' Other than that, good video.

@ripsonlaik 4 месяца назад

Video I’ve been waiting for!! Thank you..great video!

@angieroot5781 14 дней назад

Thank you for a very detailed tutorial!!

@rrpp1425 3 месяца назад

Excellent tutorial. Thank you!

@2mustange 3 месяца назад

That was great info. If you ever replace the door i would go ahead and add a slopped sill pan under the threshold so water always wicks out.

@belowdelancey1025 3 месяца назад

Man the timing of this video. Huge thanks man!

@lindaroyal8161 4 месяца назад

Woo hoo - 1st new house fix! Look forward to all the rest to come

@ryanomac27 4 месяца назад

First project in the new house? Great to see Matt!

@TheFixerHomeRepair 4 месяца назад

Yes! 😁👍

@wendydix5534 4 месяца назад

❤

@pistool1 4 месяца назад

Nice work and execution! Old doorways, warped walls, ceilings and curved floors can be a pain when renovating :-)

@JohnSmith-tv5ep 3 месяца назад

Good job for saving a buck! Just want to give you a tip, when using tapcons, more times than not they will snap off or strip out when you use an impact to install them, so to save you much grief, after you prepare the anchor point with a hammer drill through the concrete, use a standard drill to send them home. Glad it worked out for you though, ( no re-do's!)

@Sapnek 4 месяца назад

Yey!!!!!!! New project... looking forward to all your videos to redo the whole house!!!!!!!!!

@GrannyFilmingAgain 16 дней назад

I didn’t think o needed this but here I am. 🤣 thank you!!

@mattym8 3 месяца назад

Great channel! Like a longer This Old House segment.

@tightline6lb 16 дней назад

Nice job.

@anniemartin3531 21 час назад

Thank you everything I needed to know! Subbed 👍

@AffectionateDriftwood-vr2sf 3 месяца назад

Cant wait to see how your forever home takes shape! Great start with the door tho dude!

@compulsiveinvestor Месяц назад

This is a great video!. I'm always looking for ways to cut costs on my properties.

@laff000 15 дней назад

What timing. Im planning on doing this exact repair sometime on the coming week.

@oldtimefarmboy617 3 месяца назад

Replace the threshold and the door sweep to make the bottom of the door air tight and relatively water proof.

@redheadedgypsy1939 3 месяца назад

EZ fix for me, this video came right in time THANK YOU!

@1958PI 4 месяца назад

I do not recommend using silicone outdoors because UV light will quickly destroy it. Use acrylic instead, which can be painted over and is therefore better protected

@kellyinfanger9192 3 месяца назад

Silicone is considered UV resistant. Plus, he has a high moisture situation here, which makes silicone the preferred choice. Sorry, you missed the target completely on that one.

@mettamorph4523 Месяц назад

Man I learned a lot here. I'm gonna hire someone to do my repair.

@NoctemNemo 4 месяца назад

I like your content, thank you for it and I hope you are happy with your new house and will delight us with many new videos, thank you.

@williamwales6619 3 месяца назад

Idiot proof instructions. Love it. Keep up the good work. Oh by the way noted the (hushed) conversation with the boss. Always good to get the seal of approval. Happy wife happy life.🙂

@wolverine48126 2 месяца назад

Perfect vid! Exactly what I needed to see

@jodirauth8847 3 месяца назад

Great fix. Maybe in the future when you want to replace that door go to 36inch wide door. True its more work but that extra 4 inches makes a big upgrade for if you ever become injured and you need a walker or wheel chair.

@jsaysyay 4 месяца назад

bonus info with the blooper reel? nice (also woo to first fixing thing video in the new house!)

@Palmboom313 4 месяца назад

First project on your new house 🎉😊

@tammywood3684 3 месяца назад

To me it doesn't make sense to just replace a thrush hold,not when there's rotten frame and jam like that. It also appears you have carpenter ants 🐜 in your frame; wood shouldn't touch ground of any kind either, always place a water/moisture barrier down 1st. Do It right the 1st time, that's how you save some money long haul.

@qstrian 9 дней назад

You read my mind!

@ricecowboy 15 дней назад

They have paintable silicone. Good video.

@madmodders 4 месяца назад

Those C-clips come off if you adjust the screws too uneven. If you unscrew only one screw completely, the board can't go up, and so the clip bends and comes off. Ideally you want to turn all screws at the same time. :) And no bend like at 18:59.

@philshock3805 9 дней назад

You can also cut that aluminum threshold with a wood working miter saw. Blades designed for wood have no problem cutting aluminum. Personally, I would have addressed the dry rot on the jambs but you can (and did), do want you want. 😃

@kayBTR 2 месяца назад

Excellent video!

@percyfaith11 3 месяца назад

Thanks for showing the process. Very helpful and informative. I'm curious as to why you did not repair the rotted wood on either side of the door before putting the threshold in.

@nothankyou5524 3 месяца назад

Very nicely done!!

@VuHung-p2t 27 дней назад

Thank you ❤❤

@crochetrodeo 3 месяца назад

Thanks! I needed all steps!

@boblasseter8617 3 месяца назад

Great vid forDIYer's. I would have replaced jamb legs at same time...easier to get out. I cut mine at the bottom of lower mortise and match height on opposite side, shim out to plumb, glue in and your done! (plunge cut behind casing and re-caulk, I also use DAP clear 35yr, it's paintable.

@pedaphelps 3 месяца назад

just the video i needed. Thank you so much

@mrclaus859 4 месяца назад

Another good one. Thanks for posting

@seattlebeard 5 дней назад

Outstanding. Glad I subscribed. :o)

@RafaelSwit Месяц назад

I find Bondo to be a great quick and affordable fix for small sections of rotted out wood.

@robertvandyke9781 3 месяца назад

great vids bro you are easy to follow

@marciareagan2718 4 месяца назад

We have an old house with a wood threshold. It’s really in bad shape but we want an antique door so we keep putting it off waiting to change the door. Wish we could just go buy something. Hehe.

@TheFixerHomeRepair 4 месяца назад

But I’m sure it will be worth the wait!

@dtm8073 3 месяца назад

Awesome video, thank you!

@J4Julz 3 месяца назад

Always helpful, especially when I have unsightly rotten thresholds on my garage. Thanks! Oh and yeah, glad you fixed that burn spot. Whew. Refinish w spar urethane. 😊

@67daltonknox 2 месяца назад

I would treat the rot in the door frame. My favorite is 50:50 acetone and epoxy resin. This soaks into rot to a good depth, kills mold and termites and after the acetone evaporates, the epoxy cures and makes the wood hard.

@avivat3010 3 месяца назад

Great video again!!

@markusheitmann 3 месяца назад

And so it begins ❤️

@fintan3563 4 месяца назад

And so it begins! Yea-a! 👍👍👍

@HumbeTX 3 месяца назад

great video, thanks

@marx769 2 месяца назад

Thank you sir! 🫡

@chintasrvvegankitchen7761 3 месяца назад

Thank you, do you have a video on the entrance to a home threshold? My 1950's home needs one desperately. Thank you!

@williampaul8556 3 месяца назад

Nice job. Nice video.

@aletheakelly1010 4 месяца назад

Looking forward to weather stripping replace video. Probably "too easy" but I need to do it and I'm afraid I'll ruin things. Help!

@garyfrench6350 4 месяца назад

Great video

@MrBasscase5174 Месяц назад

Put up a storm door to prevent the interior door from rotting .

@WizzardofOdds 3 месяца назад

If I had found the rot at the bottom of the door frame I would have attended to it as well as it is likely to be the next point of entry. To those that may not have the fancy Evolution saw, you can cut this style threshold with either a mitre saw or a table saw with a sled. Aluminum can be easily cut on table and mitre saws. Certain silicone can be painted. DAP window and door can be painted.

@JackSmith-jj3bi 14 часов назад

When removing the old threshold, I make two cuts a foot apart. That way if they were super sealed at initial install, they enter one foot section can be removed first. The the outside sections can be eased out without any damage to door frames.

@BJ-qr2bj 3 месяца назад

I would add an awning to keep water away from the door.

@tomt9543 3 месяца назад

A standard miter saw will cut that with no problems! The aluminum cuts just like wood, and doesn’t harm the blade at all!

@jamesm.specht3504 Месяц назад

You hosed whoever is going to try to replace this in the future by putting the construction adhesive in the tapcon holes. Some genius did this on my front porch. I could not get the screws out to replace the wood piece. It was a pain to cut them off and get them out. Then, I had to patch the holes. You should have fixed the jamb at the same time.

@TheFixerHomeRepair Месяц назад

It will be me replacing it... when the jamb is ready. I'm not worried about it. 😀👍

@tracygraham4929 3 месяца назад

Thank you

@weekendwarrior3420 Месяц назад

Looks like that asphalt, being too high, causes water to collect and go under the sill. Your new sill will rot in a couple of years. You need to cut some channel in the asphalt to let the water drain away.

@MrRyanlipp1980 Месяц назад

Thx

@wayneswonderarium 3 месяца назад

Carbide tipped circ/table saw blades will take out aluminum fine, too!

@TheFixerHomeRepair 3 месяца назад

👍

@AlexeiTetenov 3 месяца назад

11:38 No sill gasket to separate the wood from the concrete?!

@srg3798 5 дней назад

And the best part.... no unnecessary bullshit music.

@mikeknoll1130 4 месяца назад

Perfect.

@jazzdad52 3 месяца назад

Great video! Several times you mentioned “metal” cutting blade. You might want to specify which metal. You can cut aluminum with wood cutting tools, steel requires “metal” cutting blades. For steel, teeth are very fine, compared with wood. The coarseness of the teeth should be determined by the thickness of the material, for steel, much finer than for wood and aluminum.

@bishopp14 3 месяца назад

Yup, I came here to say this!

@bugtusslealien3931 3 месяца назад

The aluminum threshold looked great. I would have cut out a new piece of PT wood and replaced that rotted one. Then, buy a new weather strip. Originally that door was probably $60. Cheaper.