How To Replace Fog Light Kit 2006-2012 Toyota Rav4

Подписаться 532 тыс.

Просмотров 41 тыс.

50% 1

Buy Now!
New Fog Light Kit from 1AAuto.com 1aau.to/ia/1ALF...
This fog light replacement kit is great to add to any vehicle that wasn't already equipped with fog lights, or you can use it to easily replace a damaged factory fog light system rather than pay for expensive module or wiring harness repair. This video shows you how to install and wire new fog lights on your 2006-2012 Toyota RAV4.
• Check here for more videos on the 2006-12 Toyota RAV4: • Toyota RAV4 2006-12 3r...
This process should be similar on the following vehicles:
2006 Toyota Rav4
2007 Toyota Rav4
2008 Toyota Rav4
2009 Toyota Rav4
2010 Toyota Rav4
2011 Toyota Rav4
2012 Toyota Rav4
Tools you will need:
• 10mm Wrench 1aau.to/ohz/1AX...
• 10mm Socket 1aau.to/ovo/1AX...
• 12mm Socket 1aau.to/oza/1AX...
• Trim Tool Set 1aau.to/oir/1AX...
• Ratchet 1aau.to/oBp/1AX...
• Socket Extensions 1aau.to/oza/1AX...
• Electrical Tape
• Wire Ties
• Pick 1aau.to/ofg/1AX...
Subscribe: / @trq
Check out our playlist:
Toyota RAV4 2006-12 3rd Gen: • Toyota RAV4 2006-12 3r...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Опубликовано:

4 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 23

@TRQ 2 года назад

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

@nwsights6301 10 месяцев назад

Excellent tutorial you guys have helped me through a lot of part replacements. Just ordered a set of these for my RAV4 I knew how to install them but you guys usually have better ways to do it than I may think of so I will use this method today, I appreciate the video thank you!

@MichaelLee-yh7ss 2 года назад

Best instructional video ever. Helped me install my fogs on '07.

@KingBaconMonger 2 года назад

I never thought of putting a wire through the rubber grommet surrounding the two coolant hoses. Great idea and way easier than getting to the wiring grommets.

@CarlosMartinez-oh7ok 17 дней назад

Excellent video, however, I need to point out a few things: 1) do not connect the fog lights to an important car fuse like Ignition, AC, Computer, etc. If the fuse has a problem, your car won't run or something important will start operating. This happened to me and my car would not start anymore after I installed the fog lights. 2) Instead of the Ignition, use the cigarette lighter/Power Outlet fuse or something that won't cause your car not to function if something goes wrong. , 3) Use a fuse tap wire he showed, it is safer, but he failed to mention you need a low-voltage fuse on the end (where he has the blue inserted in the tab wire), and the original for the car should go closer to the insert tabs. So you use two fuses. This will save you some headaches.

@dustinponce2033 Год назад

Great job my man 👍👍👍👍

@Die2liv Год назад

I want to commend you with getting right down to the install!

@baims8367 Год назад

Your y’all should include the fuse jumper wire with the kit

@fatality_don7813 Год назад

My vehicle already came with the fog lamp wires but I don't see a switch to turn them on and it didn't come with the fog lamp pieces in the bumper either

@MrPiccoto 3 месяца назад

Hey guys, I did exactly what this awesome tutorial shows, fog lights turn on and everything but my car doesn’t start anymore…. Anyone knows what it could be?? Feel it’s got something to do with the fuse ?? Help please

@Zenmartian 10 месяцев назад

is there a wiring diagram for this on how to connect it via the low beam so it goes off when switching to high beam ?

@saul71101 Год назад

Is it already has a pre-wired should I just get the relay the fog lights and the switch?

@larry92adventure65 2 года назад

So for the piggyback fuse holder can you buy red cable to to extend for the switch?

@LegalpiracyAAARRRRGG 2 года назад

I’m trying to install fog lights on my 07 and this may be a dumb question but with all the connections and wires and the fact that I already have a fog light wire harness installed in the car would I have to ground those wires to the battery because I would rather avoid all electrical work if necessary, I mean if my wiring harness is already there it should already be all hooked up right I just need to install the fog lights and hook up the switch right ?

@minhtrinh7218 Год назад

Do you know where i would find the fuse for foglights in a toyota highlander 2012? I can't find it and I was wondering if you would know anything about it.

@franke2129 2 года назад

Low light fuse (if you decide to tap for switch power) still gets power when high beam is switched on

@nwsights6301 9 месяцев назад

I just did this the exact way you did it and my fog light switch has power to it still and they can be turned on with the car off no key???

@christophernewman6947 2 года назад

What does the yellow wire contented too

@FueledByRyan0 2 года назад

What was the issue with the original fog lights in the vehicle?

@soldiersvejk2053 2 года назад

great video

@TRQ 2 года назад

+soldiersvejk Thanks for watching our video! 1aau.to/m/Shop-TRQ

@luizbiersack6664 2 года назад

Got it all together and no power to the fog button and they don’t turn on before I install them I tested the fog lights they work I have also tried to use a different t fuse to get power nothing