How to Replace Front and Rear Motors and Tires on the Kaabo Mantis King GT | VoroMotors tutorial

Подписаться 15 тыс.

Просмотров 7 тыс.

50% 1

Welcome Voro riders! Today we will be showing you the best way to replace your front and rear motors and remove your tires on the Kaabo Mantis King GT.
The Mantis King GT is Kaabo’s best all-around electric scooter. Unlike its dual-stem brethren, the Mantis GT weighs less than 80 lbs and boasts a nimbler, racier ride. It’s got all of the tech and comfort upgrades from the Grand Touring series: thumb throttle, sine wave controllers, a large, centered display - and more. Along with advanced technology and improved construction, it has a higher water resistance rating and quicker folding mechanism than previous models. It hits harder, feels better, rides faster, and is straight-up stronger. And BTW, it’s really, really good looking.
Compare more scooters on our website: bit.ly/CompareVM
Need repair help? 🛠 Do you want to become the master of your electric scooter? Our RU-vid channel is home to one of the largest databases of tutorials and after-service assistance content in the electric scooter world! If you don't see your particular issue covered in a video, let us know in the comments. We're always looking to expand our content and would love to hear from you all!
💻 Facebook: / voromotors
💻 Instagram: / voromotors
💻 TikTok: / voromotorsoff. .
💻 Join our NEW Forum!: www.voromotors.com/a/p/commun...
💻 Join our VORO MOTORS OWNERS CLUB: / vorom. .
💻 Join our EMOVE OWNERS CLUB: / emove. .
Our official website: www.voromotors.com
Email us: support@voromotors.com
If you found this and don't have your own electric scooter yet, come check out our stores in Los Angeles and Brooklyn!
📍VORO LA: 14350 Arminta St, Panorama City, CA 91402 | 323-922-3329
📍VORO NYC: 148 39th Street, Bldg 19, STE B320, Brooklyn, NY 11232 | 929-999-5851
We ship worldwide! 📦 To be a dealer of our electric scooters in your country, please email us with the subject "Dealership Inquiry," and our representative will get back to you.
#VoroMotors #Kaabo #MantisKingGT #tires #replacement

Авто/Мото

Опубликовано:

6 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 35

@VoroMotors Год назад

Thanks for all the feedback! This tutorial covers how to replace the front and rear motors AND how to remove and replace the tires. Please let us know what other tutorials you would like 🛴🛴🙏🙏

@KeannuReevezzz03 Год назад

you should not remove the screws holding the rim in place while the tire is fully inflated 🤦🏻‍♂️🤦🏻‍♂️🤦🏻‍♂️ who trains your "technicians"? and why is he using a spoon tool to remove the tire of a split rim? its a split rim for a reason

@Dannycky96 Год назад

I think the title should be "How to replace the motors on the Kaabo Mantis King GT" removing the deck plate and undoing the wiring is not necessary for changing the tires.

@Aaron-lr1di Год назад

Thank you!!!!! I was looking for a comment like this. The whole time I thought I clicked on the wrong video I was like “wtf is he doing removing all the wires inside of the deck and sh*t” now I’m hesitant on removing the tyres in case of a flat lmao

@XtremeKillah101 Год назад

Exactly, I was very confused for a second

@howto-ln9rs Год назад

OMG 😯 I've been doing it the wrong way all this time 🤔 so it should take me 1 hour long and not 10 minutes like i usually take 🤧 This is ridiculous 🤣

@VoroMotors Год назад

If you're having any trouble, please feel free to reach out to our team at support@voromotors.com. We're here to help!

@Aaron-lr1di Год назад

@@VoroMotors I think the OP was being sarcastic

@DT-Nicky Год назад

I've replaced the tire and inner tube on my Mantis 10, without using this involved process. (The process is exactly the same) all you need is an optional flat head, 4mm, 5mm and 18mm socket wrench and the replacement tire and or tube.

@blackjack21477 Год назад

So you dont need to remove the batteries and cables and shti?

@matthieucroset Год назад

What?? I was able to replace my tube without opening the deck and unplug all the wires. You just have to remove the wheel and open it with the half-rim. Opening the deck is only needed for changing the brake rotor because you have to pass the wire into the rotor.

@DT-Nicky Год назад

I know right, you can change any tire or tube on any split rim scooter by following an easier process than this.

@hyrulemasterchef9573 Год назад

This process was crazy. They literally tore the entire scooter apart. Never in a million years

@user-tn2pi1gy7r 8 месяцев назад

Unfortunately when changing tires yesterday I noticed my rotor was warped. So now I will have to go through this ridiculous process at some point when my pads are worn out unevenly because of it. Not looking forward to this process at all.

@1SlipperyPenguin Год назад

Y’all know this is a split rim right ?

@sebastiene.5631 Год назад

Which oil for the brakes please ?

@alpacinox3671 2 месяца назад

Congrats for the video. A kind question: In your opinion, are the handlebars too high for a 1.70 m person? I would need to know the height from the footboard to the steering knob to realize this.

@gregggonz Год назад

Jeez... maybe just add a quick disconnect to the motors.

@ginotonny Год назад

🎉 Stem replacement tutorial please! 😭😅😢 I understand that there is a problem with the stem in the first Kaabo King GT, it would be a good idea to show us how to change it please!

@johnerollemelencio Год назад

Lol🤣🤣🤣🤣 i replaced mine without opening the deck. This is so ridiculous. Lol

@Aaron-lr1di Год назад

I’m now scared of changing my tyres. Was this really necessary?????

@drewdabs6758 Год назад

Too much work for the tires right?😅 or does the cable the reason why you need to remove the deck & wires etc?

@bkiky01 10 месяцев назад

Does the tread rubber stick right back, or does it need extra glue?

@Bobbrians 9 месяцев назад

The first couple times it will stay sticky enough to stay down, after that some rubber cement will be needed.

@critroid Год назад

Removing hall sensors 100% unnecessary for tire change but would still like indepth instructions on removing and installing hall sensor wires for rotor/motor replacement.

@VoroMotors Год назад

Truth - we were demonstrating more than just the tires being swapped. Thanks for the request for the hall sensor wires.

@hyrulemasterchef9573 Год назад

You guys need to sell Surrons

@mkysml Год назад

wait... wait wait wait... to fix a flat i need to gut the deck? hahaha! like can you imagine if AAA showed up to fix a car flat and opened the hood? if to fix a bicycle flat the mech started loosening the crank arms. good gods.

@VoroMotors Год назад

Hi David, please see the pinned comment just under the video for reference.

@madspoulsen4243 Год назад

Do I really need to put the old rotor on before I put the new rotor on? 🤣

@dando4230 Год назад

Uhhh… no thank you. I like my way of replacing the tires better… remove fender, remove right swingarm (side without brake disk), remove split rim bolts and replace tube/tire. Takes about 5 minutes and you don’t even have to remove the wheel. C’mon guys.

@Bobbrians 9 месяцев назад

Why in the name of greyskull would kaabo run the rear motor wires through a tube smaller than the connector on the wire??? Has the kaabo engineers ever heard of a slot? Just run a grinder down the length of the tube and boom, fixed, you no longer need to de-pin a connector to change a brake rotor.

@patrickb133 2 месяца назад

Absurdity: What engineer would make this so hard for a tire change especially on a tube tire that seems to get a flat every 100 miles. I so regret buying this POS!