Тёмный

How to Replace Front Brakes 2004-10 BMW X3 

TRQ
Подписаться 545 тыс.
Просмотров 18 тыс.
50% 1

Buy Now!
New Brake Rotor Set from 1AAuto.com 1aau.to/ia/1ABF...
Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes. This video shows you how to install new, quality TRQ brake pads and rotors on your 2004-10 BMW X3.
• Check here for more videos on the 2004-10 BMW X3: • BMW X3 2004-10 1st Ge...
This process should be similar on the following vehicles:
2004 BMW X3
2005 BMW X3
2006 BMW X3
2007 BMW X3
2008 BMW X3
2009 BMW X3
2010 BMW X3
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa/1AXA...
• Pocket Screwdriver
• 16mm Socket 1aau.to/oa/1AXA...
• 17mm Socket 1aau.to/oa/1AXA...
• Angled Die Grinder 1aau.to/oa/1AXA...
• Brake Caliper Compressor Tool. Single Piston. Lever Style. 1aau.to/oa/1AXA...
• Brake Caliper Hanger 1aau.to/oa/1AXA...
• Needle nose pliers 1aau.to/oa/1AXA...
• Needle nose pliers 1aau.to/oa/1AXA...
• Pliers
• 1/2 Inch Air Impact Gun 1aau.to/oa/1AXA...
• 1/2 Inch Breaker Bar 1aau.to/oa/1AXA...
• Ratchet 1aau.to/oa/1AXA...
• Torque Wrench 1aau.to/oa/1AXA...
• Brake Grease
• Brake Parts Cleaner
• Cloth Rags 1aau.to/oa/1AXS...
• Copper Anti-Seize
• 6mm Hex Socket
• 7mm Hex Socket
• Hammer 1aau.to/oa/1AXA...
• Wire Brush 1aau.to/oa/1AXA...
Subscribe: / @trq
Check out our playlist:
BMW X3 2004-10 1st Gen E83: • BMW X3 2004-10 1st Ge...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Опубликовано:

 

20 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 13   
@TRQ
@TRQ 3 года назад
√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*
@kevingray1020
@kevingray1020 3 года назад
Hands down the best explanation video on changing brakes. All important steps were show & explained. You don't waste peoples time. You rocked it 👏. #5stars#heknowshowtoexplain#amateurstakenotesplease
@alkachaz-ej6cv
@alkachaz-ej6cv 2 года назад
An awesome simple video very straightforward and to the point
@Plasteringprojects
@Plasteringprojects 3 года назад
Do you loosen the resoiver to stop brake fluid compressing too much..?
@SE16Proud
@SE16Proud 8 месяцев назад
Very good vid👍 no critism🤔 always before you push piston back in caliper lift rubber gater n put some copper grease in there.to lubricate it...i didn.t on mine n boy the piston stuck caused massive wobble when breaking as well as wobble at different speeds as brake was stuck on heated the front wheel..me being a drama queen i thought omg the transfer box was in trouble..through my stupidity if i.d gone to a garage they could.ve told me anything and ended up costing 1000.s..lucky i.ve a knowledgable friend in the know n spotted it straight away and was easily fixed by greasing the rubber that houses the caliper piston 😮 👏👏👏👏👏
@MrDutchentre
@MrDutchentre 4 года назад
I’m seeing the recommended torque for an e83 -17” base model is 90 ft lbs. Isn’t 110 way too much?
@KnuckleBuster
@KnuckleBuster 4 года назад
Nope
@DawgPoundx19
@DawgPoundx19 4 года назад
Are the X1 Brake systems identical?
@bee2333
@bee2333 2 года назад
Why was the brake sensor replaced? Was it damaged or does it have to be replaced as well??
@HASAWNTUCKER
@HASAWNTUCKER 2 года назад
It needs to be replaced as well. When you do the brakes and rotors!
@dandouglass7171
@dandouglass7171 3 года назад
That's a 2096 BMW X3
@dandouglass7171
@dandouglass7171 3 года назад
Brakes are squeeken big time ,so I need to put some grease. WHERE?
@MrNieto11
@MrNieto11 3 года назад
Did it get better?If not, Make sure you put the brackets on correctly.
Далее
BMW E83 X3 Front Brake Pad & Rotor Replacement DIY
20:17
Немного заблудился 😂
00:16
Просмотров 229 тыс.
Тестирую гаджет для роллов! 🙈
00:42
How to Replace Rear Brakes 2004-10 BMW X3
11:53
Просмотров 12 тыс.
Most Common Brake Installation Mistakes!
13:29
Просмотров 4,6 млн
How to Replace Rear Shock 2004-10 BMW X3
15:09
Просмотров 28 тыс.
Ever Since The Boyfriend Changed Her Brakes....
35:33
Просмотров 543 тыс.
How to Replace Front Brake Calipers On Any Car!
21:04
Просмотров 406 тыс.
Немного заблудился 😂
00:16
Просмотров 229 тыс.