Buy Now!
New Control Arm with Ball Joint from 1AAuto.com 1aau.to/ic/1ASL...
This video shows you how to install new front control arms from TRQ on your 2009-2019 Ford Flex. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear.
This process should be similar on the following vehicles:
2009 Ford Flex
2010 Ford Flex
2011 Ford Flex
2012 Ford Flex
2013 Ford Flex
2014 Ford Flex
2015 Ford Flex
2016 Ford Flex
2017 Ford Flex
2018 Ford Flex
2019 Ford Flex
Tools you will need:
• Pry Bar 1aau.to/oZT/1AX...
• 11mm Wrench 1aau.to/o4t/1AX...
• 18mm Wrench
• 24mm Wrench
• 15mm Socket 1aau.to/obKK/1A...
• 18mm Socket 1aau.to/oarT/1A...
• 19mm Socket 1aau.to/oarT/1A...
• 24mm Socket
• 32mm Socket 1aau.to/odm/1AA...
• Locking Pliers 1aau.to/ong/1AX...
• Ratchet 1aau.to/obPD/1A...
• Socket Extensions 1aau.to/obKK/1A...
• Torque Wrench 1aau.to/oaS3/1A...
• Gloves 1aau.to/oaxG/1A...
• Rust Penetrant
• Safety Glasses
• Floor Jack 1aau.to/oagW/1A...
• Hammer
• Jack Stands 1aau.to/o5s/1AX...
• Pole Jack
• Punch
• Rubber Mallet
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
7 сен 2024
