Тёмный

How to replace front drive shaft infiniti g37 g35 sedan awd 

Jules Mechanics
Подписаться 11 тыс.
Просмотров 22 тыс.
50% 1

How to replace front drive shaft infiniti g37 g35 sedan awd
i know i didn't show some parts cause i was trying to hold the camera and it kept dropping but anyway, i was trying to basically get it out without removing the catalytic converter but. if yours was not broken like mine then you would have to remove the catalytic converter to make it much faster process. if you got clean bolts top and bottom on the catalytic converter by all means take it off.
Hope you enjoyed the video don't forget to leave a LIKE and SUBSCRIBE also hit the BELL so you get a notification when new videos ARE POSTED!!!
Follow me on instagram:
Merch: julesmechanics.com/
Jules Mechanics official Page: bit.ly/2Dl9vl7
MY Car Page "VQFEDDY": bit.ly/35D6JJxr

Авто/Мото

Опубликовано:

 

2 сен 2021

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 62   
@bigrichcomedy8130
@bigrichcomedy8130 2 года назад
I watched several videos, and although you and I had a different transmission setup, your video was the most accurate to my issue and replacing my drive shaft. I purchased a used drive shaft, it was not in good shape, I took it back, as they had 12 in stock, but they wouldn't sell me another one. So I went to a place called Camp Auto in Barberton, they had a used one in phenomenal shape. I watched your video and I have to say, you hit everything right on the head. After I removed the catalytic converter it was smooth sailing. I did need a new stud because one broke off of the converter. I had to take it to be removed. I had to cut the rusty boots at the mid-pipe as well. I found replacement bolts at Home Depot. The studs I got from the dealer were 10mm, 150 and 125. Had to purchase lock nuts from home Depot as well. But everything worked perfectly. Thank you again for sharing your knowledge!
@darkspartan806
@darkspartan806 Год назад
Just finished this repair on my 08 G35X. There's a much easier way to remove & install the driveshaft. There's a front crossmember brace that's held on by 8 14mm screws. Remove that along with the aluminum exhaust brace & everything pops in & out with ease. No need to remove the cat.
@832LACOUPE
@832LACOUPE Год назад
Got the same car about to do this repair What’s your Instagram
@daciajackson5377
@daciajackson5377 Год назад
Dark Spartan can you send a video
@lobssangmarrero4781
@lobssangmarrero4781 Год назад
I did it the same way to my m35x bro. It was a little tight getting the shaft to clear the power steering lines to the rack but i made it happen
@Gm29_mtz
@Gm29_mtz Год назад
@@832LACOUPE lmk
@eliaslopes3882
@eliaslopes3882 Год назад
I’m so glad I saw this comment. You’re a life saver haha
@bigrichcomedy8130
@bigrichcomedy8130 2 года назад
Appreciate this video. Have to do some work on mine. Getting the new shaft today
@midatlantictools
@midatlantictools 2 года назад
Just found your channel. Keep the videos coming..!
@JulesMechanics
@JulesMechanics 2 года назад
Welcome ✊🏽
@CrossRdNorth
@CrossRdNorth 19 дней назад
Nice video. I have to do this job and dealer wanted $2700 not including putting the cat back in. Too much on a car with 240k miles.
@compamando6086
@compamando6086 8 месяцев назад
would it be the same for a g37x coupe 2009
@bigglo1970
@bigglo1970 4 месяца назад
Just wondering was it the drive shaft for sure for u? I ran into a clunking sound after a hard right turn and more then likely it’s that drive shaft I changed my passenger cv axel thinking it was that because it was busted up real bad but still same clunking Soo my boy said drive shaft
@DTUFINOPhotography
@DTUFINOPhotography Год назад
Question... whenever i put my car in "Drive" i hear rattling noise like if its coming from the cats, but they aren't, its def under and around that location. could it be a drive shaft? How can i check to test and see?
@thomassheldon3423
@thomassheldon3423 Год назад
I need that 8mm Allen wrench Rachel thingy
@biggnace4375
@biggnace4375 2 года назад
are you local to do any car work.. I can be your reference I'm in the jersey area...
@darrenford3900
@darrenford3900 6 месяцев назад
How long it took you to get it in place
@nicktorres5540
@nicktorres5540 11 месяцев назад
This man honest no bs and straight to presh big dog
@g37x5
@g37x5 Год назад
Finally found your video. I’m having the same issue! Weird cluck sound when driving from 0 Km to 5km. Just doesn’t sounds good. No grinding hard so the diff is fine but the u joints?! That’s why my alignment is messed. I’m a little curious where to get the right parts for the g37x 2012 sedan
@JulesMechanics
@JulesMechanics Год назад
Rockauto
@johnoaks6405
@johnoaks6405 Год назад
Hello great job on that so how do I change the cabin filter on 04 infiniti G35X every time I turn on the heat it smells like something burning?
@devoywilliams3956
@devoywilliams3956 10 месяцев назад
its behind the glove box pop it out carefully
@RetroFihty
@RetroFihty 4 месяца назад
Bro my bolts are stuck af. Any advice ?
@DTUFINOPhotography
@DTUFINOPhotography Год назад
Where you located? need you to do mine on my FX35.
@nickelz140gazadavis6
@nickelz140gazadavis6 2 года назад
This just happened to my m35. Thought it was over for me. Wish I had some tools to do it myself but AAMCO got it now. How often do I need to change the diff oil since I was told they run a lot of oil
@JulesMechanics
@JulesMechanics 2 года назад
Every 20k to 60k
@Vqunknown
@Vqunknown 11 месяцев назад
Link to the drive shaft ?
@clarktina5659
@clarktina5659 10 месяцев назад
Whats the mileage on your car?
@alexandrumitev4107
@alexandrumitev4107 Год назад
Thank you good man ! I have the same problem !Jutst trying to find cheep drive shaft it cost a lot now ! any links I'll be apricciate!
@JulesMechanics
@JulesMechanics Год назад
Rock auto
@mrmoney755
@mrmoney755 Месяц назад
Definitely Dnt need to remove the cats tho on spot for everything else good stuff
@matnyc3236
@matnyc3236 2 года назад
My local mechanic said it would cost $800-$1700 to replace the drive shaft on my 2006 Infiniti m35x. Does that sound reasonable to you? Thanks.
@dabiggdogg1027
@dabiggdogg1027 Год назад
I just had it done on my sons 2011 G37x My mechanic charged $830 The driveshaft was $550 Labor was $280 I’ve been using him for years he’s cheaper than going to the dealer.
@infinitiboy10k93
@infinitiboy10k93 2 года назад
Yo appreciate this video and what do you mean it was diggling cuz when I drive I hear sum diggling but I don’t think it’s that you know
@infinitiboy10k93
@infinitiboy10k93 2 года назад
It only diggles when I hit like a bump
@JulesMechanics
@JulesMechanics 2 года назад
@@infinitiboy10k93 could be sway links, struts, etc
@llll-rg3ol
@llll-rg3ol 2 года назад
My cats bolts are too rusty to take out I couldn’t do it. U know any other way too get the driveshaft on?
@181auto3
@181auto3 2 года назад
Separate the ujoint at the transfer case. Pull the o2 sensor out. The shaft will come out of the car without dropping the cats. Then on the new shaft separate the u joint , position the driveshaft back in the car, drive the splined yoke into the transfer case, and then carefully install the ujoint, it's a bit tricky to get the ujoint back together , just take your time It's the way I do it, works every time.
@ryzetv1659
@ryzetv1659 Год назад
You got any tips on replacing rear driveshaft on awd g37? I’m only seeing $700 😟
@Bear_83
@Bear_83 6 месяцев назад
Have you got it done
@awesomesaucetv8624
@awesomesaucetv8624 2 года назад
Quick question if u pull my front drive shaft off, can I still drive my car , like will it just be rear wheel drive
@DrJosh-zp8xe
@DrJosh-zp8xe 2 года назад
your transfer case might leak fluid.
@urielmartinez8064
@urielmartinez8064 2 года назад
Can u ???
@lobssangmarrero4781
@lobssangmarrero4781 Год назад
Yes u can. The transfer case will not leak fluid. That’s if we talking about an Infiniti
@untouchableg203
@untouchableg203 Год назад
If it has two drive shafts then yes, any almost any car that’s 4wd
@victordiaz106
@victordiaz106 Год назад
@@lobssangmarrero4781 would a 2010 m35x leak at transfercase? The front ujoints on shaft are bad knocking
@theodoremace3771
@theodoremace3771 9 месяцев назад
Hey man I appreciate the fuck out this help.
@181auto3
@181auto3 2 года назад
You know you don't have to do any of that, at all.
@JulesMechanics
@JulesMechanics 2 года назад
Shoe me
@181auto3
@181auto3 2 года назад
@@JulesMechanics 1. Remove transfercase crossmember. 2. Remove cat converter tie brace. 3. Remove o2 sensor 4. If it's a factory original drive shaft...cut the driveshaft as it's not serviceable 5. New driveshaft, Remove the u joint at the transfer case side. 6. Take the splined yoke and install it in the transfer case, make sure it is driven all the way in 7. Slide the driveshaft in 8. Reassemble the ujoint in the vehicle, use something like Lucas red and tacky to keep the needle bearings in place. * this only works on replacement driveline with snap ring retention on the ujoint, a staked in ujoint is not serviceable Pay attention to how you orient the reassembly of the ujoint, it's quite easy, but is also easy to screw up. 9 . Install o2 sensor 10. Install cat converter tie bracket 11. Install transfer case crossmember 8.
@181auto3
@181auto3 2 года назад
You don't have to take the tie bracket off, I do when I can for line of sight, bit that doesn't really need to be done
@181auto3
@181auto3 2 года назад
@@JulesMechanics The reason your video was watched and comment on, was my helper is encourage to see how others do things, and to see how I do things, so he can develop his skill, he's encouraged to see the how and why and if he can provide the same results, safely and so on. I had him show me what he found, I do have step by step info with my shop software, but we all know that there are work around, we develops tips and tricks. So I saw this ,and thought knowledge gained....is nothing if it's not shared...so I wanted to get your attention sooner than later so it could be shared ya know. My helper and porter now think they are on camera duty as I guess I should film this, to help the other guys out, as I'm an independent shop as well.
@pumpanickleP
@pumpanickleP Год назад
Question car remove the front drive shaft and still drive the car , what’s the worst that can happen I have fx45 awd but my drive shaft broke for the front and I would rather remove it and just have rear wheel drive
Далее
How to replace U joints with no special tools
13:48
Replacing Front Driveshaft On A G35X (AWD)
18:33
КРАСИМ ДЕНЬГИ В РОЗОВЫЙ!
01:01
Просмотров 479 тыс.
I LOVE My Infiniti G35! RWD and a BLAST to Drive!
15:09
Symptoms Of A Worn Or Failing Driveshaft
2:03
Просмотров 1,1 млн
Pulling to PERFECTION! | Getting Glassed!
12:56
Просмотров 6 млн
Infiniti G35x Front Differential
4:01
Просмотров 7 тыс.
06’ G35X Front driver side CV axel removal
9:23
Просмотров 25 тыс.
Every car need this.#car #carhack #shortsyoutube
1:00
#automobile #дальнобойщики #авария
0:31
Bike trick and Bro's aura...
0:11
Просмотров 7 млн