Тёмный
No video :(

How To Replace Front Fenders On Passat B6/B7 

HOW TO DO
Подписаться 7 тыс.
Просмотров 7 тыс.
50% 1

Hello everyone and welcome to a new episode on my howtodo youtube channel.
In today's episode I will show you how to replace the front fenders on the VW passat b6/b7. To do this, you must remove the front bumper of the car and the mudguards inside the wheels.
Disclaimer:
Due to factors beyond the control of HOWTODO, I cannot guarantee against improper use or unauthorized modifications of this information. HOWTODO assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. HOWTODO recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of HOWTODO, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not HOWTODO

Опубликовано:

 

31 мар 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 16   
@iyaramonk
@iyaramonk 3 месяца назад
Thanks for all the Passat videos. Very helpful
@HOWTODO0828
@HOWTODO0828 3 месяца назад
My pleasure!👍🙏
@bu_ba
@bu_ba 2 месяца назад
This is correct video! That explain tutorial is great! Thanks for that!
@HOWTODO0828
@HOWTODO0828 2 месяца назад
Glad it was helpful!✌️🙏
@sergiuc92
@sergiuc92 3 месяца назад
Thanks for the video very helpful 👍🏻👍🏻👍🏻
@HOWTODO0828
@HOWTODO0828 3 месяца назад
Glad it was helpful, you won't find any video better than mine on the entire internet on how to do it. Enjoyy friend 🙏
@gianpierovignoli1527
@gianpierovignoli1527 3 дня назад
Why take out the front grill? It didn’t seem necessary for me.
@HOWTODO0828
@HOWTODO0828 3 дня назад
It is necessarily 🙏
@semperfi32
@semperfi32 4 месяца назад
Nearly the same as on my A6 4F.
@HOWTODO0828
@HOWTODO0828 4 месяца назад
Yes, the method it's similar for most of the vehicles out there
@Endri2044
@Endri2044 3 месяца назад
Did you put the sponge back in when you finished?
@HOWTODO0828
@HOWTODO0828 3 месяца назад
You don't need to put the sponge from the middle of the fender back because it will hold water and the new fenders will start rusting again. Don't put it back. Only put back the sponge from between the fender and the front door.
@Endri2044
@Endri2044 3 месяца назад
@@HOWTODO0828 ok thanks very much, do I need to glue it back or will it be ok without the glue?
@tasman2966
@tasman2966 3 месяца назад
Ja się obu gąbek całkowicie pozbyłem i dzieki temu nie ma juz rdzy.
@HOWTODO0828
@HOWTODO0828 2 месяца назад
No glue needed, only push it back into place
@GingerAvenger605
@GingerAvenger605 Месяц назад
@@HOWTODO0828 I wouldn't put that sponge back in either. It retains water and causes premature rust at the front of the rocker panel.
Далее
How To Remove Front Bumper On VW PASSAT B7
9:00
Просмотров 11 тыс.
RESTORING MY CHEAP VW PASSAT R36 | PART 2
13:32
Просмотров 209 тыс.
2006 VW Passat B6 - fender removal
4:01
Просмотров 40 тыс.
Most Viewed Customer States Moments of ALL TIME! #3
18:16