No video :(

How to Replace Front Passenger Side CV Axle 2003-13 Toyota Matrix

Подписаться 503 тыс.

Просмотров 26 тыс.

50% 1

Buy Now!
New CV Axle Assembly from 1AAuto.com 1aau.to/ia/1AAX...
A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications. This video shows you how to install one in your 2003-2013 Toyota Matrix.
• Check here for more videos on the 2003-13 Toyota Matrix: • Toyota Matrix 1st Gene...
This process should be similar on the following vehicles:
2003 Toyota Matrix
2004 Toyota Matrix
2005 Toyota Matrix
2006 Toyota Matrix
2007 Toyota Matrix
2008 Toyota Matrix
Tools you will need:
• Pry Bar 1aau.to/odj/1AX...
• 10mm Socket 1aau.to/ojY/1AX...
• 14mm Socket 1aau.to/om2/1AX...
• 17mm Socket 1aau.to/om2/1AX...
• 21mm Socket 1aau.to/ofv/1AX...
• 30mm 12-Point Socket 1aau.to/of/1AAS...
• 1/2 Inch Air Impact Gun 1aau.to/oaI/1AX...
• Ratchet 1aau.to/on6/1AX...
• Socket Driver
• Socket Extensions 1aau.to/om2/1AX...
• Torque Wrench 1aau.to/ohA/1AX...
• Bungee Cord
• Copper Anti-Seize
• Rust Penetrant
• Center Punch 1aau.to/oao/1AX...
• Drain Pan 1aau.to/obg/1AX...
• Floor Jack 1aau.to/odI/1AX...
• Hammer 1aau.to/odo/1AX...
• Jack Stands 1aau.to/odo/1AX...
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
Toyota Matrix 1st Generation 2003-13: • Toyota Matrix 1st Gene...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Опубликовано:

29 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 22

@TRQ 3 года назад

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

@davidr.f6242 3 года назад

You are 1 in a million who have videos on the matrix especially covering 04/05. Don't stop please. Thanks you thank you thank you!

@daytonafuntim 2 года назад

It should be noted, the gear oil used in this video is for a matrix with a manual trans. That being said, this video was a LIFE SAVER for me with my 2004 Pontiac Vibe auto and easily saved me $200 in labor costs. Appreciate it!

@antbankzbruh 3 года назад

Love you have all these new videos on the matrix, very well explained and edited. Thank you

@TRQ 3 года назад

+AntDawg Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ

@zack87to87 4 месяца назад

Thank you i just did the wifes brakes and heard the clicking noise, this is perfect and refilling the trans looks easy. Thank god.

@mikes.4811 3 года назад

These videos help a lot. Thanks! Also, wish the fill plug looked like that on my trans. I have the 6 speed and it takes a 10mm hex. 🤢

@GinkoproductionsCa Год назад

I have a 2006 Toyota Matrix manual and it's roaring on the driver side front wheel. I haven't had a chance to check it out yet. It roars more turning to the right and is quiet when turning left and is also louder depending on what rpm I'm doing. 2000rpm is the loudest roar and minimizes at higher rpms. Not really speed related it seems. Love your videos. We don't really have a place to work on it so I will need to take it to a shop, however, having an idea what they need to do is helpful so thanks for the educational moment.

@danielmeza9267 7 месяцев назад

Muchos gracias por el video

@Poll_Keays_Ranch 2 месяца назад

I'm still trying to find a video to CV Axle out for an AT. Because everyone is still trying to sell me a CV Axle for an MT.

@JustinVK 7 месяцев назад

Thank you for the video!

@natesrawharvest8872 2 года назад

Great video, but I've been giving my cv axle "love taps" for 2 hours now and it's still stuck in the transmission. They need to make videos with the mechanic on their back working with 12-18 inches of clearance like the rest of us. Show us how to do it without a professional pneumatic car lift.

@davidhoulden5791 2 года назад

How did you make out?

@daytonafuntim 2 года назад

Use the prybar or a long flathead screwdriver to wedge it out. I had the same issue with my automatic 04 vibe and had to pry is apart. Since I was already replacing the cv, no harm no foul 👍

@calisand9055 9 месяцев назад

Not a awd wich is what’s a beast any pointers

@chuckspeer2163 2 года назад

Thanks very good video

@stewiegriffin289 2 года назад

Have a question? I have 2003 vibe pretty much same car. Had that bad wheel bearing hub sound so tore it apart and hub is good. The howling scraping noise is still there here the issue is where the axle slides back into the transmission. Is there a bearing inside where the splines slide back into the tranny? Car shifts fine runs great except for this grinding noise.