How to Replace Front Shock Absorbers 98-11 Ford Ranger

1A Auto: Repair Tips & Secrets Only Mechanics Know

Подписаться 2,5 млн

Просмотров 184 тыс.

50% 1

Buy Now!
New Shock Absorber Set from 1AAuto.com 1aau.to/ib/MNSS...
In this video 1A Auto shows how to replace front shocks in a Ford Ranger.
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oXh/1AX...
• 10mm Wrench 1aau.to/ojU/1AX...
• 19mm Wrench 1aau.to/ojU/1AX...
• 10mm Socket 1aau.to/oHV/1AX...
• 19mm Socket 1aau.to/omt/1AX...
• Wheel Lock Key
• 1/2 Inch Breaker Bar 1aau.to/ohg/1AX...
• Torque Wrench 1aau.to/opB/1AX...
• Floor Jack 1aau.to/on6/1AX...
• Hammer 1aau.to/ohC/1AX...
• Jack Stands 1aau.to/oof/1AX...
For More Info visit us at 1aau.to/h/aGz/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Опубликовано:

9 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 86

@1AAuto 4 года назад

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

@mathewm7136 4 года назад

Great vid and thanks! I've owned a 2003 Ranger since new and do all repairs. My one piece of advice. A week before you plan on doing this R&R, spray the bolts down with Liquid Wrench (or similar) every two days beforehand and drive over some bumpy roads. Makes things ALOT easier to pop the nuts & blots when the time comes.

@user-hm5zb1qn6g 2 года назад

I appreciate the information being conveyed, but also how it's presented in a straighforward, clearly spoken manner, with no attempt at comedy or the presenter trying to make himself the centre of attention. So refreshing.

@1AAuto 2 года назад

+Cam Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c

@CherokeeFlutist59 5 лет назад

Just got a '99 Ranger and I notice it's quite a bumpy ride. Definitely a good tutorial and affordable parts too! Thanks very much for the info!

@1AAuto 5 лет назад

Thank you for watching and leaving great feedback! +Colby Sinor

@nickfeness 3 года назад

You're the type of mechanic I'd want to work on my truck. So many people just use raw metal to rip the hubcaps off and scratch the hell out off the mags. I appreciate your technique with the taped tool.

@1AAuto 3 года назад

+Nick Feness Thanks for the feedback!

@nofortunatesonII 5 месяцев назад

I like that you tape the screwdriver blade to prevent damage to the wheel. My OEM lug wrench has rubber on the tip for this purpose.

@1152jerry 7 лет назад

As a point of information, if you have struts and not shocks (struts have springs around them) you cannot access the large nut at the top of the shock to hold it when removing the top nut. It is very difficult to remove this nut since the entire shock will turn and they are usually rusted. Vice Grips sometimes work but it is very difficult.. This is my suggestion: Don't spend hours trying to get this nut off. Get a reciprocating saw with a metal cutting blade and just cut the stud off below the nut. This takes 5-10 minutes and saves much agony and time. You could do it with a hacksaw but it will take a little longer. Work smarter not harder.

@1AAuto 7 лет назад

+1152jerry Thank you for watching, and for the advice! We appreciate all of the feedback left on our channel for other viewer's to use as another option. 1aauto.com

@LarryGoggins000 3 года назад

Thank you so much brother

@oceanceaser44 2 года назад

Just saved me a lot of swearing. Thanks!

@Shadowband72 2 года назад

The same thing could be said for pretty much any part that you're going to be replacing anyways . No point trying to keep it in perfect shape unless you plan on reusing it .

@Northerner68 4 года назад

Thanks for the video guys. I replaced front and rear shocks on my 2008 3.0L Ford Ranger today. Great tip to double up on wrenches to remove the top nut! Mine both snapped off about 3/4 of the way up due to rust swelling. Bottom nuts on the driver side snapped off immediately, but had to ratchet off the passenger side fully. A few taps with a 4lb hammer to the bottom of the shock freed everything well after bolt removal. I cleaned the mount points with brakleen after dismount. The driver shock exploded on me after dismount, but could have been due to twisting during removal. Just a reminder to never point the shock ends towards your face during analysis post-dismount! I also had to Jack up the lower control arm to get the angle right to mount the low-end of the shock. I'm in Canada where rust is a reality of life, so the lower nut on the top part of the shock was 17-18mm, depending on rust swelling (and needed to be hammered on!).

@1AAuto 4 года назад

+Sam Long Thanks for the tips and taking the time to share!

@user-xd2te4go6j 4 года назад

AWSOME VIDEO, STEP BY STEP, YOU got right to the POINT, GREATTTTTTTT

@1AAuto 4 года назад

+J Thanks for checking us out! 1AAuto.com

@alecgamer420 4 года назад

Thanks this gave me the confidence to do it myself seems easy enough appreciate the step by step guide

@1AAuto 4 года назад

+Alec Conigliaro Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com

@FalconleoFalconleo 7 лет назад

great videos ford ranger repair at my finger tips thank you

@michaelguilbault2064 2 года назад

Nice succinct yet comprehensive video. Thanks!

@user-xd2te4go6j 4 года назад

Just bought, a ford with the same shock, GREAT VIDEO,

@joseoneway5065 3 года назад

Mines are surrounding by a big sprint and they are making noise from the button part of the shocks when they get rain water do you think replacement will be necessary?

@Trinity-ki6ig 8 месяцев назад

Love 1A auto

@enterprise59 3 года назад

All pretty EASY with a brand new lower control arm with PRE loosened shock nuts. For average people this is a hell of a lot HARDER, especially if your truck has over 200k miles running on original shocks.

@jestopherson 2 года назад

Changing my gfs front and possibly rear shocks pretty quick here. Any suggestions to make it easier? I've done all the suspension on my tacoma but it's in better shape than her ranger

@oceanceaser44 2 года назад

Just did mine at 260,000 and it wasn't bad at all. I have the fx4 with Ranchos so had to grind the top bolt bit otherwise no issues

@gerrycamarena1948 3 года назад

what ft lb do you screw the top screws to? cant seem to find on car specs

@abramruelas5176 4 года назад

Love these videos great detail

@1AAuto 4 года назад

+Abram Ruelas Thanks for checking us out! 1AAuto.com

@dallasbuilt8010 2 года назад

Thank you for the videos

@rosendomendoza2985 11 месяцев назад

Question after that do I have to do the alignment? Please let me know when you have time thanks

@dianefielder4277 8 месяцев назад

Heyyyyyy, the rubber grommet’s have 2 sides. Very different…. What’s the proper way to install. If both are different, which way to install is correct.😢

@robertmatetich2898 5 месяцев назад

How can I tell when the upper bolt is tight enough? Is there a tongue spec?

@alexislange2509 2 года назад

my truck squeaks every time i go over a little bump or anything and i just changed the swaybar links. could my shocks be going baf

@markbohannan 10 месяцев назад

Does the car need to be lowered and suspension level when torquing the shocks?

@copperheaddesigns672 2 года назад

Bolt holes do not line up on studs on my 1999 toes ranger xlt 2wd supercab any ideas on what to do all other shocks have the same hole on them

@justacatwalkingonakeyboard4454 3 года назад

My new shocks say I need to support the lower control arm while doing this, is that true to save the cv joint from bending too far?

@hydraulics 4 года назад

Canada: substitute torch for all wrenches

@GoddamnAnge 4 года назад

For reals

@cheaptricked3148 3 года назад

What do you mean?

@jyudat4433 3 года назад

@@cheaptricked3148 hella rust

@MrRolsen83 7 лет назад

Thanks guys!

@user-jr3xb4op5b Год назад

Good day...! Namibian dollars how much shocks absorber and stabilizer for 2.5 ford ranger 2013 model front parts?

@raincoast9010 2 года назад

Thanks

@davesbackyardchickensandou3905 4 года назад

My old shocks d9 not have a nut where you pounded on the wrench mine is a round piece there.

@SSCShortChannel 3 года назад

Hi there. Do I need an alignment after changing shock absorbers?

@braydenfreemanmusic3109 3 года назад

No you do not

@user-hm5zb1qn6g 2 года назад

Thanks, brother. That was my question, too.

@brucefoster1215 2 года назад

It looks like the truck had new control arms and new rack why didn't the shocks get replaced?

@JuanGomez-gb6ce 3 года назад

Hi, Can replace the shocks without removing the tire or will it be more difficult and more work? Thanks

@1AAuto 3 года назад

+Juan Gomez good question, based on the steps removing the wheel to gain access to the strut or shock is recommended.

@chikmagnet106 4 года назад

Mine truck has springs on them, is the procedure the same or a little different?

@1AAuto 4 года назад

+Nibboi Andrew We don't have a how-to video for your vehicle right now, but the basic steps in this video should be enough to do this task.

@lowpricedpaint 7 лет назад

The trouble I had, was there were two different types of shocks. One for coil spring type suspension, and a different one for the torsion bar suspension. I ended up with the wrong pair, and had to go back to get the proper ones.

@cee5773 5 лет назад

Do these things leak? I have a 97 ranger that's leaking some fluid from the front and back. Kind of looks like the shocks

@1AAuto 5 лет назад

+CesarTns They can if they're old. If they do it's a sign they need to be replaced

@retrochristmas7329 3 года назад

Does it not have springs?

@Jayzc66 6 лет назад

I hit a little dip on the road and when the vehicles suspension compresses and the pops up to decompress it makes a hard hit noise or something. Do I need new absorbers? Almost like somethings going to pop off idk.

@colec.6477 6 лет назад

Jayzc66 same has it been fixed yet?

@justacatwalkingonakeyboard4454 3 года назад

I’ll let y’all know this weekend, I have the same problem and have replaced the entire front suspension except shock absorbers. From my understanding it is possible from the shock contacting the frame from the bushings being worn out

@ccm200121 7 лет назад

dude i swear i just seen you at the festival in Ponta Delgada

@BelieverMeSF 3 года назад

Does anyone know the bolt torque specs??

@S1ckPuppiess 4 года назад

Can I removing and replace my shocks without putting the truck on a lift or jacks??

@kmf1392 4 года назад

No. You need to have the suspension free from any load. The wheels need to be off the ground.

@JuanGomez-gb6ce 3 года назад

Hi, I have the same question. Were you able to get the shocks replaced? If so, did you have to remove the tires? Thanks

@michaelcarletti766 4 года назад

Do you deliver parts to Canada?

@1AAuto 4 года назад

+Michael Carletti Yes, there is a shipping cost. Thanks for checking us out!

@MAGWolf 5 лет назад

I've done this to 3 rangers without removing the tires lol.

@1AAuto 3 года назад

+Juan Gomez Thanks for watching! You can do that, but removing the tires will make the job much easier.

@markknight6910 3 года назад

Why do the "1A Auto" shocks look 1/3 ?? smaller in the cylinder diameter. Another ,Made in China, cheaper/substandard to oem specs ?? Good video though

@capitanazoish 3 года назад

Mine has coilovers

@ADVNevada 5 лет назад

did not work on my 07 ranger sport

@1AAuto 5 лет назад

+ADV Nevada We are sorry to hear this was not the same on your '07 Ranger. While the steps may be similar, there can be differences between different trim levels of vehicles for repairs like this. 1aauto.com

@JuanGomez-gb6ce 3 года назад

Hi, any tips on that job? I am planning on replacing the shocks on my 2010 ranger sport RWD. Thanks

@pandaruiz6653 5 лет назад

Heigth of shocks please.. Very important to me

@1AAuto 5 лет назад

+Panda Ruiz Thanks for checking us out! We do not have the measurements available, however, they will be built to exact OE specifications as long as they are listed to fit your vehicle. 1aauto.com

@elmasloco822 6 лет назад

TORQUE SPECS anyone????

@boxedowl 6 лет назад

For 1998 to 2010 upper shock mounting nut should be 30 to 41 ft-lbs. Lower shock mounting nut should be 15 to 21 ft-lbs. For the 2011 year the numbers are 35 ft-lbs for the upper and 18 ft-lbs for the lower.

@burtreynolds3143 5 лет назад

@@boxedowl Thanks

@JuanGomez-gb6ce 3 года назад

I thought he just used the rachet and his arm strength. I don't think he used any specific torque.

@bluegizmo1983 4 года назад

Great vid, now come do mine! I'll let you do it for free since you can record it and make money on RU-vid 😂

@kowhort 7 лет назад

Anything that is hidden in an explanatory video is problematic. Shadows do not work well here. I know you know what you are doing but for the market you claim you need better lighting. You can't afford any miscommunication.

@1AAuto 7 лет назад

+kowhort Thank you for checking us out, and the feedback. We certainly agree and will ensure that future videos are updated. 1aauto.com