How to Replace Fuel Pump 2000-06 GMC Yukon

Подписаться 439 тыс.

Просмотров 121 тыс.

50% 1

Buy Now!
New Fuel Pump Module Assembly from 1AAuto.com 1aau.to/ia/1AFPU00430
Combustion engines need three things to operate: fuel, air, and spark. If your fuel pump isn’t delivering the fuel your engine needs, it will run poorly, or not at all. Or, the pump is fine, but your fuel gauge isn’t working. Many modern pumps include an integrated sending unit. Either way, a new engineered to fit fuel pump for TRQ is just what you need. This video shows you how to install a new TRQ fuel pump with integrated sending unit in your 2000-2006 GMC Yukon.
• Check here for more videos on the 2000-06 GMC Yukon: • GMC Yukon 2000-06 2nd Gen
This process should be similar on the following vehicles:
2000 GMC Yukon XL 1500
2001 GMC Yukon XL 1500
2002 GMC Yukon XL 1500
2003 GMC Yukon XL 1500
2004 GMC Yukon XL 1500
2005 GMC Yukon XL 1500
2006 GMC Yukon XL 1500
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oar8/1AXAA00013
• 8mm Wrench 1aau.to/oc2/1AXAA00011
• 15mm Socket 1aau.to/oacr/1AXAA00015
• 8mm Socket 1aau.to/o4x/1AXAA00017
• Air Compressor
• Needle nose pliers 1aau.to/oox/1AXAA00051
• Needle nose pliers 1aau.to/oox/1AXAA00052
• Ratchet 1aau.to/oat3/1AXAA00016
• Torque Wrench 1aau.to/oyf/1AXAA00044
• Cloth Rags 1aau.to/oiz/1AXSS00035
• Gloves 1aau.to/oeI/1AXSS00048
• Safety Glasses 1aau.to/oaG/1AXAA00343
• Brass Punch
• Hammer 1aau.to/onV/1AXAA00091
• Pick 1aau.to/ojb/1AXAA00037
Subscribe: / @trq
Check out our playlist:
GMC Yukon 2000-06 2nd Gen: • GMC Yukon 2000-06 2nd Gen
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Авто/Мото

Опубликовано:

30 апр 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 48

@TRQ 3 года назад

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

@alohaerickson 10 дней назад

Great video. Watching it convinces me that I will be less frustrated bringing it to my mechanic who has the lift and can do this easier than my driveway on stands. If I were 30 years younger and had less arthritis, I would easily do this with this videos assistance. Mahalo

@GodlikeGTZ Год назад

This is the most professional DIY video ive seen.

@luisfernandosalassanchez7105 5 месяцев назад

I just bought TRQ fuel pump. I'm watching the video how to installed..thank you for the videos.

@Robert-lz1lj 2 года назад

Have a 2004 GMC Yukon 4.8 took me about an hour doing it on the ground 360000 miles and still going strong

@brianhaygood183 Год назад

How high off the ground did you have to lift the vehicle?

@timwitte9313 9 месяцев назад

Excellent video. I wish all videos were like this. Not story telling, thorough, and good quality. Great job!

@DrAlexanderHamilton Год назад

Great job!. The only thing I would add is while you're down there, I would blow out the gas and evap lines. If the pump is in need of replacing, I'd probably go ahead and change the evap system (cannister, solenoid, purge valve) as well and blow out the lines as those lines get filled with charcoal/carbon pellets when the cannister gets old. I know it was just about changing the fuel pump, but might as well do some preventive maintenance while you're down there. Just like most mechanics will change the Transmission seal when changing out a rear main seal. You're already there. Don't want to do that maintenance twice!

@starcarpet 2 года назад

Hands down the best video fort replacing the fuel pump. Only difference in my case was the fuel pump had "barb" style connectors to connect the 3 hoses to the pump. Had to order the tool and the rest was history. Thanks!

@TRQ 2 года назад

+Jason T with StarCarpetLV Thanks for watching our video! 1aau.to/m/Shop-TRQ

@leonpatterson8445 Год назад

Excellent video! Thanks for the great detail! Too old to do it myself so now to find a good mechanic to tackle it.

@cammims7645 3 года назад

Thanks guys Just relpacedd this on my 07 Yukon Denali XL Just to find out my Fuel pump fuse blew and was the reason why it didnt want to start. But o well. My truck got 330,000 Miles. Pump was going to go out at any given day/ Night anyways. Thanks for the video

@buddyrebel_Garcia 2 месяца назад

I bought this fuel pump from you guys. I’m about to install it tomorrow. I hope it is OEM quality and will last the life of the truck

@FBIsurveillance62 3 года назад

Excellent video thanks for posting really appreciate it. Very detailed

@kenlaing7529 3 года назад

are no special tools to remove Fuel lines?

@ryanunruh2683 Год назад

That frame is even a touch rustier than my 05 XL. Same configuration I ve got tho, so very helpful video. I could have used a bit more detailed instructions re the connectors tho, and what they're all for

@rooseveltrainesjr7618 Год назад

Excellent job

@jeffreycoleman3038 Год назад

Great video

@austinpowersfasha8878 Год назад

I have a special adapter for a fuel tank as well. Its a 14” piece of 2x12 sitting on a 2 ton floor jack. Check mate.

@Str8kustomz 11 месяцев назад

What’s the line for the blue cap? I have a 2003 Denali and it doesn’t have a line on the tank for that center one. I put the other 2 lines on sand have been driving it. But once I park I smell gas fumes

@ironpig701 2 года назад

Great video. Think mines bad. Gauge says empty yet I know its full. And if I go in reverse real hard and slam on brakes the gauge then goes to full. Dont have a lift so on the ground it is but will be pretty much the same.

@alexbee777 Год назад

What is the normal pressure in the system with this pump? The old pump was 95-100 psi, the new one was 55-60 psi. 🧐

@biringen 2 года назад

i wonder why they did not put a accesshatch in the floor at factory

@2Jeezuzisreal Год назад

My 05 yukon rusted out on top. Perfectly good pump. I am so mad at GM. I cut a hole in the backseat and put in a junkyard fuel pump has worked just fine for 4 years. I piled on the grease on top. Seal up the hole using the same metal piece with silicone or use a mastic like roofing "Ice and water "sheild. Peel and stick. Caution don't use a grinder. Use a hammer and chisel or a air chisel.

@TRQ Год назад

+RU-vid guest Thanks for the tip! We'll pass this info along to our production team. 1aau.to/m/Shop-TRQ

@Hardgamer1016 Год назад

I was really looking to buy parts from you guys, but you don't ship to Canada so that's a big loss on your part. Need to expand the delivery more

@fredgalles479 3 месяца назад

Fuel gauge is not working properly now will not move when it is full any reason for it not to work

@nitrozack3062 Год назад

Don’t you have to disconnect the fuel pump?

@gfunkkowboy 2 года назад

Good job brother My truck broke down I hit the gas tank with a hammer and it started again. Should I replace the fuel pump

@faithw6038 2 года назад

Yeah but look at some on the ground vids if you don't have a lift

@joserosales1174 2 года назад

I would say yes read that if you tap on it and it starts then the pump is at faulty.

@ravenjohnson8986 2 года назад

QqqQq

@freedomnugget9584 Год назад

Didn't even clean around the pump module before pulling it. And all that debris fell in and didn't clean out the fuel tank... great job! (sarcasm). Good bye new pump.

@richlymann6451 2 года назад

Hardest part is dropping the fuel tank. The pump is no problem. Pickup truck lifting the bed is easier than the suv

@stevemcgill4328 Год назад

IVE GOT AN 03 YUKON,, AND MINE IS NOTHING LIKE THAT. BETTER BE MORE CLEAR ON YEARS. AND CONNECTIONS.

@josezepeda4322 Год назад

Fully agree, wish I had read this comment before, could have spared me from snapping a connection onto the evap canister I didn’t know existed lol

@josezepeda4322 Год назад

Mine was a 2000 btw. Some pretty big changes made apparently

@terrilljohnson34 Год назад

I agree I have a 2002, nothing like this

@williamwatson3567 3 года назад

I Wonder How Much is Usually Charged To Do That Job....? And How Much does an O.E.M. Dealer Pump Cost...? Just for Future Reference... I have a 2000 Yukon XL. I would Not Look forward to Doing that Job, Broke Down on the roadside Or in the Driveway...I wonder if Some Backyard Mechanics would even Tackle That Job...it could take all day or a weekend...! Just Curious.... BillinL.A. 1-23-2021.

@EB4L9964 3 года назад

Well mine just went out and my mechanic wants 180 labor with fuel pump cost and gives me 3 month warranty on work done. I think that's fair.

@KOB2063 2 года назад

Baker CA wanted to charge me 900

@sandramckay9972 2 года назад

My son is a diesel mechanic and said it's actually pretty easy, but definitely NOT to do it without a shop. Our 2001 yukon has over 300,000miles on it, I have been doing a lot of replacements and fixes but this isn't one I can do on my own without a way to get the rig up on a wrack etc.

@smnkm4ehfer 2 года назад

Honestly they're not that hard of a job, under an hour for a competent person with the correct tools on hand, and thats on the ground, and not rushing.

@biringen 2 года назад

i would consider make a hatch in the floor just above the pump. im guessing i need to swap my pump soon