How to Replace Front Wheel Hub and Bearing 2000-06 GMC Yukon

Подписаться 477 тыс.

Просмотров 61 тыс.

50% 1

Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com 1aau.to/ib/1ASHF00005
Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision. This video shows you how to do the replacement yourself on your 2000-06 GMC Yukon.
• Buy TRQ at 1AAuto.com: www.1aauto.com/yt/i/1AASP00028
• Check here for more videos on the 2000-06 GMC Yukon: • GMC Yukon 2000-06 2nd Gen
This process should be similar on the following vehicles:
2000 GMC Yukon XL 1500
2001 GMC Yukon XL 1500
2002 GMC Yukon XL 1500
2003 GMC Yukon XL 1500
2004 GMC Yukon XL 1500
2005 GMC Yukon XL 1500
2006 GMC Yukon XL 1500
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oaV6/1AXAA00013
• Pry Bar 1aau.to/oFX/1AXAA00020
• 15mm Socket 1aau.to/oaUJ/1AXAA00015
• 22mm Socket 1aau.to/ojq/1AXAA00266
• 36mm Socket 1aau.to/obg/1AAST00006
• Brake Caliper Hanger 1aau.to/ofA/1AXAA00084
• Trim Tool Set 1aau.to/oQr/1AXXX00006
• Needle nose pliers 1aau.to/owe/1AXAA00051
• Needle nose pliers 1aau.to/owe/1AXAA00052
• 1/2 Inch Air Impact Gun 1aau.to/omM/1AXAA00252
• T55 Torx Socket
• Ratchet 1aau.to/oa9r/1AXAA00016
• Socket Driver
• Socket Extensions 1aau.to/oaUJ/1AXAA00015
• Swivel
• Torque Wrench 1aau.to/oafH/1AXAA00044
• Brake Grease
• Brake Parts Cleaner
• Copper Anti-Seize
• Paper Towels 1aau.to/ou8/1AXSS00035
• Rust Penetrant
• Center Punch 1aau.to/ojy/1AXAA00055
• Floor Jack 1aau.to/oMm/1AXAA00068
• Hammer 1aau.to/oIT/1AXAA00091
• Jack Stands 1aau.to/oJC/1AXAA00065
• Wheel Chocks
• Wire Brush 1aau.to/ooH/1AXAA00079
Subscribe: / @trq
Check out our playlist:
GMC Yukon 2000-06 2nd Gen: • GMC Yukon 2000-06 2nd Gen
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Авто/Мото

Опубликовано:

31 мар 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 28

@TRQ 3 года назад

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

@TheAxecutioner 4 месяца назад

For the shade tree mechanics like me: I had to buy a very short 15mm socket to get a socket on the 15s, and the only one that was short enough was 3/8 drive & with that a 3inch 3/8 wobble extension. A 15mm box wrench would not give me enough leverage to break the 15s free. In particular the top 15m,m bolt was the worst to get a socket on. Also moving the steering wheel from one side to the other depending on which bolt i was working with helped a lot. I also considered cutting off the bottom of the bolt that interfered with loosening the top bolt, I didn't do that but it would've made it a lot easier. This video was very helpful, but not everyone has kick ass tools like the guy in the video.

@samsen3965 Год назад

7:10 15mm (Becareful of CV boots) 3 hub knots - 133 fp 7:45 35mm central - 177-foot pounds 10:45 caliper pad knots 2- 129FP 11:50 T55 - 2 Caliper bolts - 80 FP 12:19 22mm wheel log knots 140 FP

@vwnotch Год назад

Nice instructions, saved me a visit to the auto mechanic.

@justingonzalez702 4 года назад

Buying these today. Thanks.

@phlyonwall 2 года назад

Knuckle bolts 133 ft lbs torque Axle nut 177 ft lbs torque

@samsen3965 Год назад

0:16 Is log nuts 22mm as you say or 21mm? On mine (GMC Yukon Denali XL) 22mm is loose and a bit large, and 21mm looks just the fit. 0:25 Cliper's bolts are13mm not T type and the pad holder ( 1:31) is 18mm

@commanderhare 3 года назад

how long does it take to do with basic tools?

@wadeohms714 4 года назад

Damn bro, this really helped me a lot. I'm still working on knocking out the hub right now. I'm working on this just outside my house in my parking lot. Jack stands breaker bar and other basic tools. Is there another way to get the hub off is all I have is a regular hammer. I dont have a 5lb. Hammer with me.

@joserodolforizo6504 28 дней назад

How much should I pay for this job, only one side ? Please

@lynnthompson3898 Год назад

How long did it take to do all that...?

@trapboyjack5179 3 года назад

Is there any difference between this or a 2 wheel drive Yukon?

@TRQ 3 года назад

+Trapboy Jack Thanks for checking us out! The install should be the same or similar for the 2WD models.

@lynnthompson3898 2 года назад

Is this a 2006 GMC Yukon Denali?

@samsen3965 Год назад

3:23 ABS cable

@stevencovington9508 3 года назад

What noises will let me know the hub needs replacing? I hear a slight howl from the front drivers side.

@TRQ 3 года назад

+Steven Covington Thanks for checking us out! Typically when there is rubbing or grinding that would indicate there may be an issue with the bearing. We would recommend taking this to get looked at before purchasing new parts to ensure the sound you are hearing is coming from this part.

@martinhavrilak5280 2 года назад

You did everything correct except you did not Loosen the bleeder on the caliper. You forced all that nasty Rusty brake fluid Into the Proportion valve As well as into The traction control And the anti lock system . I understand that bleeders break, But he really should have talked him into new calipers.