How to replace Glow Plugs - Shown on Mitsubishi L200 

Thanks! Will do! (you are easily pleased - thank god😂)

Can be a million and one things sadly - Battery cranking power and condition is where I would start - if you have changed the glow plugs that would have been next (Use a multimeter to check the resistance of the glow plugs. They should have low resistance if they are working correctly, check the relay as well) then its fuel quality, the temperature sensor, clean air filter etc and fuel supply pressure / injectors - thats all I can think or - hope you find it (my money is on the battery :)

A nice tip for the winter months, The Urban Ninja has an LED butt plug that I operate with a remote, surprisingly handy for lighting up the path on those darker nights !

Yes, this was the first time they had been out in our ownership! The car had around 250,000km at the time of this video. The torque setting isn’t high so hopefully they’ll come out easily. If you spray them with some penetrating fluid a few days before you do the job, all should be well. Let us know how it goes. 👍

@@DrivenMadShow i got around to pulling those glow plugs today and it was a breeze thanks to your advice and the steps in your video 👌 I had planned on just slightly cracking the tension off the plugs to allow a bit more penetrating oil to travel down the threads after spraying them yesterday. They were surprisingly easy to crack and I could tell they were going to be easy to unwind so I just went for it. I tested them all and it turns out they're still working well after all this time (238,000km's). I replaced them with a fresh new set anyhow and all went well putting it all back together too. Next job will be some new injectors where I plan on following along to your injector replacement vid. Thanks for making these awesome videos so well explained and detailed. I've gained some new confidence to do more of my own work after watching your stuff. Had a few good laughs along the way too 😄 Cheers

No problem 👍

We have a 2003 this one and a newer 2010

Thanks, great videos, I think I could change my own glowplugs now.

If only Murdock was young enough to have an ODB :)

@@DrivenMadShow Lol...... I did not realise Murdoch was pre-2000...... Everyday a school day...... Best regards to you both Stefano

We got ours some time ago from Milner (in the UK) others to try (we use KS and Yoshi where we can - Yoshi is great for assembly diagrams for reference, for free as well). yoshiparts.com. ... www.ks-international.com - depends where you are - euro 4x4 are good - been recommended jkautomotive.co.in but not used as yet.