How to Replace Headlights 11-14 Chrysler 200

Подписаться 515 тыс.

Просмотров 124 тыс.

50% 1

Buy Now!
New Headlight Assembly from 1AAuto.com 1aau.to/ia/1ALH...
Over time, headlight lenses become dull and hazy. You'd be surprised how much that affects your night time visibility! Replacing your headlight assembly is an easy way to improve safety and appearance on your vehicle. This video shows you how to install new, quality, TRQ headlight assemblies on your 2011-14 Chrysler 200.
• Check here for more videos on the 2011-14 Chrysler 200: • Chrysler 200 2011-2014...
This process should be similar on the following vehicles:
2011 Chrysler 200
2012 Chrysler 200
2013 Chrysler 200
2014 Chrysler 200
Tools you will need:
• 10mm Socket 1aau.to/oa/1AXA...
• 7mm Socket 1aau.to/oa/1AXA...
• 8mm Socket 1aau.to/oa/1AXA...
• Trim Tool Set 1aau.to/oa/1AXX...
• Ratchet 1aau.to/oa/1AXA...
• Pick 1aau.to/oa/1AXA...
Subscribe: / @trq
Check out our playlist:
Chrysler 200 2011-2014 1st Gen: • Chrysler 200 2011-2014...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Авто/Мото

Опубликовано:

12 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 61

@TRQ 3 года назад

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

@juliangutierrez1447 3 года назад

Had I known Chrysler's were such a pain in the rear to do a simple bulb replacement - I never would have gotten one!

@marias.3825 3 года назад

Same! This is absolutely 100% ridiculous to replace a headlight!!

@Michael-gq9we 3 года назад

💯

@jamieemerson5428 2 года назад

The battery is even worse!!

@brandonlo5162 2 года назад

Rule one when buying a chrysler: don't

@OverAndOverAndOver 2 года назад

The battery too cuh 🤣 I'm relocating it, who TF decided that was a good idea putting it IN THE WHEEL WELL????

@sergiomiranda1497 2 года назад

This is absolutely insane! All this work for a light bulb ?

@Consiglori25 2 года назад

Replacing the battery is not so simple either, lol

@Retalinmwar Год назад

Take the tire off of whichever side you're replacing and fold back the plastic fender well guard and boom you're in and out in a few minutes each side. This is definitely a good tutorial if you want to take longer to avoid any other chores

@CLBudreau43 8 месяцев назад

You mean tell after 40 years of changing headlights I could have been doing it like this? aint noway.

@intoxovision3121 4 года назад

My god, this is ridiculous for a headlight bulb. I'm not even sure ridiculous covers it accurately.

@eme6413 2 года назад

Im never getting chrysler 200 again

@philipkingsley257 4 года назад

The easier way to do it is to remove the front tire & wheel well cover. Access to the head lamps & turn signal is much more accessible, & definitely much more simple.

@RandyRockSolid 2 года назад

Dosent work on 13s otherwise he would have made a different video thebody is inthe way on some models

@williamqualls4578 2 года назад

@@RandyRockSolid then why doesnt he say that at the start of the video

@jacobsullivan5839 Год назад

Just did it on a thirteen randy, once you get the wheel well cover off you can reach the headlights and turn signal lamp housings easily Philip is right

@rmahi17 3 года назад

Thank you for sharing this vid. Very helpful info for removing the front bumper.

@gothamnetworks 2 года назад

First to be clear I'm only talking about replacing the headlight lamp. I know this comment has already been added but I just got done replacing my head light bulb and I want to not just say that comment I want to show how to disgusting the fleecing of people needing car services think about how on the books he goes to this insane amount of extra work and charges what they charge and some schmuck thinks oh well I guess it's justified look at everything that has to be done, yes folks look at the other comment at least one I saw that talks about how insanely simple this can be you just simply do it from the wheel well you remove the 7mm bolts you remove the push pins all of a sudden you have access to the headlamp to replace it also if you're dumb enough to try this method at home there's all kinds of trouble he's not mentioning you'll have like for example if you do this method shown do you realize they headlight will not be perfectly aligned and you will then spend hours trying to get it aligned that's just one example of how you'll spend days doing it this method don't be a fool don't do it.

@Urbanity_Kludge 3 года назад

Silly me. I clicked on the video, thinking it was how to replace the light bulbs. WHAT? he's removing the bumper?

@ChristianTroyer-um4ow 4 месяца назад

I literally just turned the tire as sharp as possible and did it in15 mins

@BallisticAero 2 месяца назад

It's more work but less tedious than removing the wheel, wheel well, and trying to reach up and in to the mounts

@Alec4500 2 года назад

This car is such a pain in the ass. I even tried to remove the wheel well cover on my 2011 and couldn't get my hand in there to reach the fkn thing to access it.

@mikeass242 Год назад

I went through the wheel wells way faster tricky but faster this guy does it the smart and easy way

@GreenJeep1998 3 года назад

For some reason, the assemblies in my 2012 200 look different, though I don’t know why so many commenters here seem to think this is just to replace the bulbs when it’s to show how to swap the whole housing?!

@elizabethashcraft1180 3 года назад

I have a 2012 as well and every video I watch does not make since with my car.

@dominikwalkmeyer3012 2 года назад

@@elizabethashcraft1180 if you’re just changing your bulbs it’s different. You will need to go through the wheel well. This is for the whole housing. They have a separate video for the bulbs

@Mindshatknow Год назад

Also don't forget when changing your bulb that the neutron collides with a uranium atom and splits it, releasing a large amount of energy in the form of heat and radiation. More neutrons are also released when a uranium atom splits. These neutrons continue to collide with other uranium atoms, and the process repeats itself over and over again. Otherwise you'll have one headlight and most likely be a huge burden on your family and that's why you bought this car in the first place.

@JB52520 3 года назад

I like the video, hate the car. Thanks so much for your help.

@MRmofoHD 8 месяцев назад

Really no one see the bolt on the headlight you can just barley get to by the grill undo it and the headligh will rotate

@Ghost-oy7vr 6 месяцев назад

I'm afraid to ask how you change the dome lights in this car 😅😭

@False_125 11 месяцев назад

Okay how do you fix the the eyebrow light in the headlight? Or do I have to replace the entire headlight to get that working again?

@Michael-gq9we 3 года назад

I have oxidation in a lense, can you remove just the lense? Without taking the whole housing assembly, bumper, horn, etc off?

@eugene1o 2 года назад

Thank you!! This helped a lot!

@JeremyBorumComposer 4 года назад

This is an absurd nuisance. It seems come Chrysler 200's have an access port in the wheel well and some do not, so check first!

@rayvoge7275 2 года назад

Hi I have a Chrysler 200 and I want to know if you have a video to remove the lower control arms

@destiny40stl 2 года назад

It already cost me hundreds of dollars for a new battery and now this...wtf!!

@robertomonia8935 3 дня назад

Cuantos dólares para cambiar las luces delantera todas

@masonmoose2205 Год назад

brother this is my third Chrysler type of vehicle I worked on you went the hard route guy in the comments below dude with a removing the front tire was closest you don't even have to do turn the tires all the way to the left hand side take the three bolts outthat's on the wheel well and the two plastic wedge anchors out of the top and it exposes the whole light

@JuggernautCorps 2 года назад

At 3:05 what's that small plug at the top right peaking out and where does it go?

@rtbthc7521 2 года назад

Is this the same guy from A1 auto videos?

@MegaDaisey1 10 часов назад

I'm surprised you haven't deleted this video yet.

@TheCooterpuppet 4 года назад

This is why Chrysler charges $300 for a service This is stupid Just pull back the wheel well and go from underneath

@nurseharvey560 2 месяца назад

My goodness, all of this for 1 headlight 🤦🏾‍♀️

@lukemorgan8447 2 года назад

Slot of work for one headlight

@ObsoleteTechnologies 11 месяцев назад

Went to my local scrapyard for a headlight. They told me a 2013 would not match.(i have a 2012 chrysler 200 ,limited. (chrome headlights)so, they WHERE correct in it wouldn't match,,,color scheme... but aside from black vs chrome ,,,it bolted right up. 🤣got the emblem and grille plus headlight for $80. Dem damn deer man!

@mikeirish5205 Год назад

It's a goddamn afternoon just to replace a bulb

@Mindshatknow Год назад

Or..just maybe or when your bulb burns our pay someone to push it into the local quarry or burn it out

@Ambergris24 9 месяцев назад

There is easier way to do this.

@breelee3136 2 года назад

Worst car ever. it’s easy but hard at the same time because i’d mix up all those bolts lol

@HeinzGuderian_ 3 года назад

Was there a curb the owner didn't run over? BTW...This repair method is pretty standard for all cars made in the past 25 years.

@lawrencehamilton3886 11 месяцев назад

All this to change a fkn HEADLIGHT smh

@alejojuan6666 3 года назад

Wtf

@canada_rye 2 года назад

LOL why he remove the whole bumper?! :D :D :D

@mrdurva9532 2 года назад

Because this car is designed very poorly and a lot of work in the front required the bumper off. The battery is also in a stupid spot behind the left side front bumper which means removing driver front tire and wheel well cover to access the battery itself