How to Replace Inner Tie Rod Ends 03-09 Toyota 4Runner

1A Auto: Repair Tips & Secrets Only Mechanics Know

Подписаться 2,4 млн

Просмотров 114 тыс.

50% 1

Buy Now!
New Tie Rod Set from 1AAuto.com 1aau.to/ia/1ASFK04049
1A Auto shows you how to repair, install, fix, change or replace a broken, busted, bad, or damaged tie rod. This video is applicable to the 03, 04, 05, 06, 07, 08, 09, Toyota 4Runner.
This process should be similar on the following vehicles:
2003 Toyota 4Runner
2004 Toyota 4Runner
2005 Toyota 4Runner
2006 Toyota 4Runner
2007 Toyota 4Runner
2008 Toyota 4Runner
2009 Toyota 4Runner
🔧 List of tools used:
• Pry Bar 1aau.to/ohw/1AXAA00020
• 19mm Socket 1aau.to/om2/1AXAA00043
• 21mm Socket 1aau.to/om2/1AXAA00043
• 22mm Socket 1aau.to/obS/1AXAA00266
• Inner Tie Rod Removal Tool 1aau.to/oy/1AXAA00062
• Locking Pliers 1aau.to/obF/1AXAA00139
• Needle nose pliers 1aau.to/oeA/1AXAA00051
• Needle nose pliers 1aau.to/oeA/1AXAA00052
• Pliers
• Side Cutters
• 1/2 Inch Breaker Bar 1aau.to/ocF/1AXAA00078
• Ratchet 1aau.to/oDy/1AXAA00016
• Socket Extensions 1aau.to/oA3/1AXAA00015
• Torque Wrench 1aau.to/ort/1AXAA00044
• Rust Penetrant
• Wire Ties
• Floor Jack 1aau.to/oiZ/1AXAA00068
• Hammer 1aau.to/ohI/1AXAA00091
• Jack Stands 1aau.to/oia/1AXAA00065
• Rubber Mallet 1aau.to/oaD/1AXAA00413
Subscribe: / @1aauto
Check out our playlist:
Toyota 4Runner 2003-2009 4th Gen: • Toyota 4Runner 2003-20...
For More Info visit us at 1aau.to/h/bVd/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Авто/Мото

Опубликовано:

27 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 85

@1AAuto 3 года назад

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

@1AAuto 3 года назад

+MysteriousOklahoma Thank you for your order! We'd love to hear about your experience. Here's a link to leave us a review on Google: goo.gl/i5JFNY

@JeremyY 4 года назад

This is the way tutorials should be filmed and presented! Very well done, 1A.

@1AAuto 4 года назад

+Jeremy Ying Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com

@joshuamoore1091 3 года назад

I really appreciate when you explain concepts. It really helps with why you're doing each portion. Thanks again!

@omarq1414 9 дней назад

Great video, going to save me cost on labor. Thanks

@MrGW2fanboy 4 года назад

In the perspective of a DIYer I love this video because: 1) It has great camera work and quality and zooming when it's needed, I dont have to guess what the person is doing 2) Great mic quality, no obstructive sounds and I can hear everything you're saying 3) Articulate, I dont have to skip through segments to get to 'the bit' 4) Small tips that will prevent hassle with the job (like tightening the castle nut to align with the hole, great tip i havent seen in a tie rod video yet) One thing I must ask though, for people who cannot get a hammer in there what other way is there to crimp the claw washer over the rod? Thank you for your work.

@1AAuto 4 года назад

+David Oze Thanks for the feedback!

@ricardovelez958 4 года назад

A tie rod remover. Rubber mallet didn’t work for me either so I used a tie rod remover it came off quick!

@toupsclassroomtoupsclassro9557 Год назад

excellent job: one note, some use a screw driver to release the inside clamp on the boot

@elgatogordo9523 3 года назад

Cool! Just what we needed to work on my son’s Tacoma 😁 Thanks once again for your informative videos 👍

@magneticallah1057 2 года назад

You helped with educating me on the upper control arms. Going for the tie rod next. Thank you 1a auto parts for saving me time and money me

@Chinyai 3 года назад

Awesome video and really helpful additional information. It really helps to see the additional tools you could use for installation and removal. Thank you.

@unebonnevie 2 года назад

Thank you! This helps a lot! The tie rod can get rusted away! So replacement is needed!

@Flyboytr 4 года назад

Great video. Well presented. Thank you!

@olenaerhardt7725 3 года назад

Thank you so much for the detailed film. No one else shows to apply Cooper Antiseaze under the Outer TR Nut. Also very useful to learn to apply some grease on the Inner TR where it contacts the Cover Boot. I will also apply some (and that grease and Cooper Antiseaze), very good idea. If to wash that Cover Boot and then apply some 303 Aerospace Protectant (Amazon), the boot will be like new, it also protects the Boot. Metal CV Boot Clamps can be found on Amazon. Thank you again.

@user-xp3vd9ux5t 2 года назад

Good video. Nice job being clear and concise

@victortrujillo2591 3 года назад

Very informative video, great job!! Thanks for sharing your knowledge!!

@kaibil1221 3 года назад

Thank you very much for you help

@markhoffman2165 2 года назад

Is it not necessary to also hold the the female end to avoid extra pressure on the gear box when removing the inner tierod?

@Fizz826 Год назад

Is it ok to use zip ties on the end of the tie rod boot? I’m afraid it’ll one day crack and come loose. I purchased the toyota power steering rack boot clamp but it’s so difficult to clip the hook into the hole…

@512TXSDIY 3 года назад

Another great video. Thank you.

@1AAuto 3 года назад

+512 TXS Thanks for the feedback!

@dagabriel9416 4 года назад

Awesome and complete instruction

@1AAuto 4 года назад

+D. Pounds Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com

@Hecto185 Год назад

Great video, thank you.

@cschighschool1434 3 года назад

Thank you so much. You save me thousand....🤝

@bmaannn Год назад

great video well done

@jessehern91 3 года назад

StoneMountains hard working step brother

@michaelroofe2587 2 года назад

I did it bro, Thanks👍

@samisonipailate998 2 года назад

Thank you so much

@joshuamoore1091 3 года назад

Fenagle is my word too!! 11:33

@trienekepatterson1194 4 года назад

Len is my favourite!

@1AAuto 4 года назад

+Trieneke Patterson Thanks for checking us out! 1AAuto.com

@xyzabc3659 Год назад

Always love these videos: wish you carried this part for an FJ Cruiser - if it’s the same part as for the 4Runner, the website doesn’t capture it.

@clockwork1277 2 года назад

"You do you boo boo" lol.... solid video

@donrobinson5662 Год назад

Awesome video...that's about as good as it gets!!

@pingpong909 4 года назад

I have a GX470 and it should be the same i believe.. but i was wondering does the steering rack portion where the inner tie rod connects to have 2 cuts to fit a large wrench? that way you can apple opposite pressure when breaking the inner tie rod free?

@briannurse2651 Год назад

Thank for that

@joshrandall5297 3 года назад

Do you really need to remove the lug nuts to remove the wheel? 😂

@Camboge 2 года назад

What area of the continent do you bonk in? I’ve never bonked. Banged, knocked, beat, hammered, but never bonked. 😆

@jaycoleman7538 2 года назад

"You do you boo boo" 😂 😂😂

@Pzack64 Год назад

And soon as you go to drive it, you’re gonna be taking that wheel back off to straighten that heat shield out 😂

@elmercondemilicor4995 Год назад

Thanks

@carlosserrano1806 3 года назад

Very clean Jobs Tanks help me👌

@1AAuto 3 года назад

+Carlos Serrano Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

@ricardovelez958 4 года назад

Thank u

@1AAuto 4 года назад

+Ricardo Velez Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com

@ma7673 4 года назад

Good video... and great use of the word bonk!!

@1AAuto 4 года назад

+M Rose Thanks for checking us out! 1AAuto.com

@condor5635 2 года назад

Nice video! Why doesn't anyone address the use of a second wrench to hold the rack in place and counter the torque of the removal? They put that wrench shoulder on the rack for a reason. I have heard you can damage the internals of the rack not doing that. Thoughts on that?

@CHB_98 Год назад

If you have the outer tie rod off should the inner tie rod be easy to move up and down on a 09 gmc Acadia ? Wondering if I need to replace

@anaheimspecialized8089 4 года назад

Where do you “bonk” at again?

@gcat9927 2 года назад

The clamp you used for removing the inner tie rod. Where can it be purchased or is there a part number and manufacturer to look it up? Please and thank you

@markhoffman2165 2 года назад

How long does it take to replace both the inner and outer tie rods?

@andrewm5190 2 года назад

I replaced my inner and outer tie rods and I it fixed my clunking noise going down the road. Now I occasionally hear a slight scraping grinding noise whenever I make sharp turns. Doesn't happen often but I hear it sometimes, what could it be?

@vladimirgoncharenko7545 3 года назад

Do I need to use locker washer if I have thread locker pre applied?

@condor5635 2 года назад

Probably not but why would you not want to use the mechanical device? That's what it is for.

@jaredfromsiliconvalley1887 9 месяцев назад

what about the other side that you dont screw on. do i just cake the inner tube with grease and put the boot then end no one has the video. i just want to be sure. ive bought from your site before

@adorablepamplona7117 2 года назад

What is the torque specs when you tighten the inner tie rod end? Thanks.

@michaelp8053 2 года назад

Impossible to get a proper torque reading for the inner tie rod.

@sultan26706 Год назад

The Camry 2016 likt this setup?

@miguelguevara1089 4 года назад

I would like to watch how to replace the drive belt on 4Runner 05, and the rear wheel bearing of the rwd 4Runner 05

@1AAuto 4 года назад

+Miguel Guevara We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1AAuto.com

@armondhammer9 Год назад

im curious what the customer complaint was before diagnosing the repair.

@adrianzamora6785 Год назад

Hello..what will happen if you dont install the washer behind the inner tie rod?

@joecarini6492 2 года назад

How do you replace a lower tie rod on a 2012 f250 Ford

@hy2473 3 года назад

what are those locking pliers called, I cant find it

@1AAuto 3 года назад

+H Y The locking pliers can be found here: 1aau.to/oQ/1AXAA00139

@jamesgriffin5620 2 года назад

Pretty sure those power steering shafts aren’t meant to spin. Hense the flat areas that are meant to be held with a wrench... isn’t this step necessary? If not it makes this job much easier..

@Asian_Connection 3 года назад

What is the metal quality of the tie rodend?

@condor5635 2 года назад

I have no clue what you are asking? Metal quality? Like titanium, steel, copper, cast iron? It's steel. What are you trying to figure out?

@Ionlyexistpardner. 2 года назад

What is the name of the wrench?

@lutomson3496 2 года назад

to bad we didnt see how much play was in the tie rod before being replaced good video though to know if it was inner or outer or both

@bigbean9620 4 года назад

"A lot of time on Toyotas they don't want to break free" Ever hear of the rust belt? XD Its not just Toyota its every car

@bigbean9620 4 года назад

Freedomenforcerm1a So is every other car though 😂

@tylerfireburn Год назад

That was funny when you were hammer smashin that lock washer and a bunch of parts were breaking off the car

@artcollette5439 3 года назад

Do you need a alignment after you finished

@1AAuto 3 года назад

+Art Collette Yes you will want to get a front end alignment after replacing the tie rods!

@artcollette5439 3 года назад

@@1AAuto thanks

@travisj2695 10 месяцев назад

You could have just measured the length instead of counting the turns.

@obedhyppolite275 2 года назад

Why all The rotors on every single videos are suddenly replaced with brand new ones even the topics is not about the rotors or front drive axles?

@nicosilva4750 3 года назад

I see a lot of these videos where no one is securing the steering rack. Isn't this putting too much pressure on the rack?

@CP110 3 года назад

The rack is bolted into the subframe, it also deals with a lot of force daily. There is no need to try and provide extra support for the rack. Also there really isn't a way to do that.