How to Replace Input Speed Sensor 01-07 Hyundai Elantra

1A Auto: Repair Tips & Secrets Only Mechanics Know

Подписаться 2,5 млн

Просмотров 64 тыс.

50% 1

Buy Now!
New Transmission Speed Sensor from 1AAuto.com 1aau.to/ia/1ATR...
In the video, 1A Auto shows how to remove and replace a broken or failing input speed sensor. The video is applicable to the 07, 08, 09, 10, Hyundai Elantra.
This process should be similar on the following vehicles:
2007 Hyundai Elantra
2008 Hyundai Elantra
2009 Hyundai Elantra
2010 Hyundai Elantra
2011 Hyundai Elantra
2012 Hyundai Elantra
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oSH/1AX...
• 10mm Socket 1aau.to/oK6/1AX...
• Ratchet 1aau.to/oWh/1AX...
• Socket Extensions 1aau.to/oSd/1AX...
Subscribe: / @1aauto
Check out our playlist:
Hyundai Elantra 2007-2010 4th Gen: • Hyundai Elantra 2007-2...
For More Info visit us at 1aau.to/h/bHh/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Опубликовано:

7 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 27

@1AAuto 3 года назад

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

@ronallistocrandalll 11 месяцев назад

Why does the video title indicate "01-07", but then the description says it applies to "07-12"? Psh. Come on...

@Vellieveil_64 10 месяцев назад

Is this the same as the “vehicle speed sensor A range/performance”? Getting code P0501

@joettahinkle2481 2 года назад

Thanks great delivery how long from start to finish this job

@marcusford8718 2 года назад

Thanks for the video.

@mpgundercover8075 2 года назад

The transmission on my 07 Hyundai Elantra goes into limp mode unexpectedly as I drive, and it will stay on first gear until I pull aside and let the transmission fluid temperature go down. Would a bad input speed sensor cause this?

@ndreyah1160 2 года назад

Probably corrosion at the terminal or connection

@elshakankiry1 2 года назад

Will a malfunction occur if I change the wires connected to the sensor?

@jacobmiller1275 2 года назад

Is this the same for a 07 santa fe

@cliffordferguson7957 Год назад

Where is the input speed sensor located on a 2007 hyundai sonata v6

@yitzharos 3 года назад

There is another sensor with a gear attached. I cannot find how to re install. I bought a manufactured part called. "Speed Sensor." It goes into the transmission with a plastic gear. Mine wont seat back down, how do I re install this?

@xIIsTReeTIIx 3 года назад

07 Hyundai Azera . Can’t find the speed sensor

@Chchchchchivo 2 года назад

Same for a kia Spectra 09??

@live1976 5 лет назад

Hey I have a 2007 hyundai Elantra and it is reading a code P0717 - Input Speed Sensor No Circuit Signal so I had put a new input speed sensor On and it came back with same code. So then I had the connector tested and found that the middle pin in the connector had no voltage but the 2 outside pins read fine. My question is do I cut the plug wire and replace with a new wiring plug to match the yellow, brown and red wiring in installing a new connector plug To clamp to input speed sensor?? Will that fix the problem with code P0717?

@heismisterioso 10 месяцев назад

I have the same problem, you fixed that?

@niopress5162 3 года назад

hi,what effect will that sensor give when its gone bad ??

@jacobmiller2177 Год назад

Where is the sensor map this hiunday elantra 2005

@1AAuto Год назад

+Jacob Miller The map sensor is typically found on the exhaust manifold in the front of the engine.

@Ty5oN101 3 года назад

Was this car shifting hard to have to replace these sensors? Did you have to recalibrate anything after replacing the sensors?

@1AAuto 3 года назад

+Tyson Amburg Thanks for watching! That could be a symptom of a faulty sensor, and it will usually be accompanied by an error code. This is a plug and play procedure, so no calibration is necessary.