How to replace Lenovo IdeaPad 3 display

Подписаться 5 тыс.

Просмотров 44 тыс.

50% 1

Replacement display - 14.0" NT140WHM-N43 1366x768 eDP
Discord - invite.itjungle.eu
If you have any questions, regarding Laptop repair and etc. you can join and ask for help.
Like and subscribe if you like the video.
More videos: / @laptopdisassembly
Tools i use the most:
1. Blade - www.aliexpress...
2. Screwdrivers - www.aliexpress...
3. Thermal paste - Arctic MX-2

Опубликовано:

3 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 95

@LaptopDisassembly Год назад

Discord - invite.itjungle.eu If you have any questions, regarding Laptop repair and etc. you can join and ask for help.

@ErickSAMachado Год назад

Man, you are awesome! Thank you so much. I followed all your steps and I managed to replace my display. My sincere congratulations for your clear explanation from Rio de Janeiro, Brazil 🙏

@sarahyun7472 9 месяцев назад

This was just the video I needed. In addition to a broken screen, my hinges were also broken, so the full tutorial on how to replace the entire display was clear and helped me to save an otherwise very good laptop from going to e-waste. Thanks for the clear steps and helpful video!

@naldikusuma1542 3 месяца назад

I changed my screen for 15ALC6, it’s a little different but your video helped a lot! Thanks.

@mikael4126 18 дней назад

Hey bro, I have the same laptop and wanting to change the display for a ips panel. Can you tell me what was different about it? Thanks a lot.

@ajmacdonald77 11 месяцев назад

Very very helpful - managed to replace my damage screen perfectly following this! Thank you!

@nice21nice 11 месяцев назад

a big thank you! you saved one kid's laptop :)

@connorwalters4980 7 дней назад

Thank you for the great video. A successful replacement over here!

@nelsonocasio2462 Месяц назад

Thank you for this video, mine worked perfect. A couple of differences but mostly the same. Mine had an extra pin connector with the ribbon that connects the the screen back to the laptop plus three small screws at the bottom of the screen frame.

@blazejkupczyk1011 Месяц назад

Świetna robota ! Trochę się dziwię, że układ chłodzenia nie został wyczyszczony przy okazji bo wyglądał słabo.

@dexter6314 4 месяца назад

like ur video thanks my screen just got broken

@danmendez5394 15 дней назад

Hello. I cracked my screen by closing it and not realizing I had left a cherry pit on my keyboard. I couldn’t help but laugh. The replacement was successful. Thank you so much. This video was super helpful. Only thing is I broke the cover bar for the hinge. Is there anyway to put it back on? I’m thinking to just super glue it back on.

@LaptopDisassembly 15 дней назад

If you did broke the pins, the only way is with super glue, or hot glue. With the second one you will be able to open it again, if needed.

@danmendez5394 14 дней назад

Noted, thank you so much. I will use hot glue just to not permanently close it.

@mikemagan2459 Год назад

Very well done!

@hbrmetal 7 месяцев назад

May God bless you who stopped at this comment and your whole family, may you prosper in all areas

@THEoneandonlystika 3 месяца назад

God bless

@hbrmetal 3 месяца назад

@@THEoneandonlystika Amen

@ledpartesinformatica Год назад

the best computer very goood

@FrenchieDutch 8 месяцев назад

Hey brother, Thanks for the video. What size double sided tape did you use?

@LaptopDisassembly 8 месяцев назад

Some no name brand. I have it from the local tool shop. All i know is it is 12cm. wide. it is thickж as paper. :)

@averagejessebell 9 месяцев назад

Thanks for this demonstration. I understand the need to disconnect the battery, but what is the purpose of disconnecting WIFI?

@LaptopDisassembly 9 месяцев назад

I disconnect the wifi in order to remove the whole display with the plastic. This way is much easier to work. You can replace it without removing it also.

@averagejessebell 9 месяцев назад

@@LaptopDisassembly Thank you!

@DEATHWISHVQ 2 месяца назад

9:59 why did you apply the tape just to take it off? I don’t know anything about computers in this matter, a buddy at school had his laptop screen cracked and I thought to look for myself on yt to see how it can be changed rather than paying as imo it doesn’t seem like a difficult task at all just patience and correct tools.

@LaptopDisassembly 2 месяца назад

I apply double sided tape. So when one side is stick to the plastic, I remove the other isolation layer so that the other side get open and the display get stuck to it.

@DEATHWISHVQ 2 месяца назад

@@LaptopDisassembly thank you!

@Basmalabooks 3 месяца назад

I didn't disconnect battery before removing the screen cable... I was fixing the hinge.. After finish my screen is black not showing light.. But outside screen is working... Did I mess the screen because not removing battery first?

@LaptopDisassembly 3 месяца назад

Did you disconnect the screen while the battery was plugged in. If yes, you may burned the backlight fuse on the display.

@Rahul_vocals Месяц назад

Under warranty Can Lenovo accidental damage protection can replace my laptop screen ??

@LaptopDisassembly Месяц назад

If you have some sort of insurance about it, yes. If no, I highly doubt it.

@CodeIsLife101 Год назад

I changed the display and now the PC does not show anything but a screen with a backlight. I connected an external display and it is the same thing. Just a blank screen. Sometimes I get flashing vertical and horizontal lines. Not sure what happened. No sounds, no beeps, no anything. Have you had this issue before? Thanks.

@LaptopDisassembly Год назад

Did you disconnect the battery before replacing the display. Also try to reconnect the display cable and memory.

@CodeIsLife101 Год назад

@LaptopDisassembly Thanks for the reply. I did disconnect the battery. I will try to dismount and mount the ram chip. I tried accessing BIOS, and it seems to do something, but all I get is a back lit black screen.

@CodeIsLife101 Год назад

@@LaptopDisassemblyOkay, the screen displays with an externally connected monitor, but the laptop screen remains black only showing the backlight

@LaptopDisassembly Год назад

Are you sure the display is compatible... Try with the old one to see is it behaves the same. Sometimes if the display is not compatible it shows only backlight or only white display.

@CodeIsLife101 Год назад

@LaptopDisassembly That is a good point. This display is for multiple lenovo laptop versions.

@hooi5683 3 месяца назад

Must i detach the entire lcd lid? Im thinking to just replace the panel by dc battery cable, but display and wifi cable still intact..

@LaptopDisassembly 3 месяца назад

No need to remove the wifi cables in order to replace the display. But if you gonna replace the whole display assembly you need to swap the wifi and camera.

@marylalthanzuali3764 11 месяцев назад

How much will this repair cost without warranty and also can it be covered with ADP warranty?

@LaptopDisassembly 11 месяцев назад

If you phonically damage you display the warranty will not cover it. If everything is fine and no sign of damage, the warranty should cover it. Otherwise the display cost around 100$.

@ludwig_der_grobe Год назад

Nice....

@vhd99ylmabasar24 3 месяца назад

fan cleaner ?

@12many4you 8 месяцев назад

At 4:25 you start removing the grey bottom bit below the screen before removing the black edge at around 4:55. I thought it was much easier to reverse that and start with the black rim before removing that grey bit. Is there a good reason to do it your way that i am not seeing?

@12many4you 8 месяцев назад

Also. Thanks man. Your video helped me be brave enough to try this

@LaptopDisassembly 8 месяцев назад

the gray bottom is on a slide mechanism. So if you try to remove the black first, there is a big chance to brake the plastic bits, that are holding the gray bottom.

@angelhdz1527 Месяц назад

Where can I buy a replacement screen

@LaptopDisassembly Месяц назад

Ebay, AliExpress or a local supplier

@JesusIsUnstoppable 6 месяцев назад

is it really necessary to remove the entire lcd from the rest of the laptop?

@LaptopDisassembly 6 месяцев назад

Yes it is way more easy, because you have to remove the middle plastic.

@JesusIsUnstoppable 6 месяцев назад

@@LaptopDisassembly I used a plastic spunger nad it popped right off. I changed the screen in about 5 minutes. Actually i took off the screen in 5 minutes. new screen tomorrow. But i wanted to let you knwo i was able ot use the spunger nad just pop off that plastic peice without taking the rest of the assembly apart.

@LaptopDisassembly 6 месяцев назад

@JesusIsUnstoppable sometimes the middle plastic is on a slide mechanism, and if you open it directly it breaks. For me is more easy to remove the whole assembly.

@DikshaSaro 2 месяца назад

is lenovo ideapad 3 15itl6 i5 10th gen display is 30 or 40 pin

@LaptopDisassembly 2 месяца назад

should be 30pin. LCD Cable Lenovo IdeaPad 3 15 3-15ITL6 alc6 ABA7 ADA6 30Pin eDP - PN# 5C10S30208 DC02C00QY20

@DikshaSaro 2 месяца назад

Display name?

@LaptopDisassembly 2 месяца назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-HGEOJayBjrA.html Innolux N140BGA-EA4 rev c3

@charles1419 16 дней назад

Hi, my Ideapad 3 was drop to a matress from my table, and the screen was dim and there s some part that is still bright. What could be the problem?

@charles1419 16 дней назад

Like a shadow swallow my screen a little part of it only is bright

@LaptopDisassembly 16 дней назад

@@charles1419 Can you upload a picture somewhere so i can have a look. But most likely the screen is damaged and needs to be replaced.

@charles1419 16 дней назад

If i were to replace it how much would it be?

@charles1419 16 дней назад

drive.google.com/drive/folders/1qZmdBdwnexMOqngJWR9xelIxQy64gl0O

@charles1419 16 дней назад

drive.google.com/drive/folders/1qZmdBdwnexMOqngJWR9xelIxQy64gl0O(DELETE THISS)

@ethgoin7537 Год назад

How do I know if the display is damaged or is only the connector, bc my display and connector looks like new and if I connect an external monitor it works but the display is still black

@LaptopDisassembly Год назад

Best way is to test with another display. It can be broken, just to test do you have a backlight.

@emenikeokorie3680 Год назад

I have same problem. Everything looks new but no display. Screen is black. My keyboard backlight works fine. When I use an external monitor, everything is perfect. Done all software fixes I could find on RU-vid to no avail. What could be the problem?

@LaptopDisassembly Год назад

@emenikeokorie3680 can be a bad connection. Try to disconnect and than connect back the display. But first disconect the battery.

@emenikeokorie3680 Год назад

Oh thanks, did that but it didn't work still.

@RafaelMoreno-wd8zl 3 месяца назад

Para que es el circuito gris

@ETgolf 9 месяцев назад

I installed the new screen but when I turned the laptop on, the screen didn't work. I believe the display connection might be the problem. But now I'm afraid to open it up again in case the new screen breaks. Any suggestions?

@LaptopDisassembly 9 месяцев назад

Disconnect the screen from the board and test on external display with HDMI. If there is a picture, than the connection on the display side can be the problem. If you gonna remove the display, put some alcohol on a sharp blade or a opening tool and slide it.. this way you will remove the adhesive easy

@ETgolf 9 месяцев назад

How do I disconnect the screen from the board?@@LaptopDisassembly

@LaptopDisassembly 9 месяцев назад

@@ETgolf Lift the back cover of the laptop. It should be visible.

@ETgolf 8 месяцев назад

Okay, I got it open again and reinstalled it. Now the display kind of works - I can see the images but it's as if there is no light. They are kind of grey or shadowed.@@LaptopDisassembly

@LaptopDisassembly 8 месяцев назад

@ETgolf can you upload a picture somewhere so I can see exactly.