How To Replace Passenger Side Valve Cover 2007-18 Jeep Wrangler 

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

Just crazy what needs to be moved out of the way to get to this valve cover! I'm surprised the transmission didn't need to come off. Great job engineers! Thanks for this wonderful video TRQ!

what a mess of engineering

Wow... looks like I'll just have to keep topping the oil 😆

What a freakin nightmare just to change a gasket! Screw that, i'll let it leak! LOL

What about the new gasket? I didn’t see you put one in

Great video. I saw you add the RTV to the 2 spots on the engine side of the valve cover but never saw a gasket go on. Did I miss something? Do you not need a full gasket? I saw when you removed it there was a white gasket hanging off.

What an incredible tutorial. Fantastic video!!!!!!

I watched the video yesterday. I'm doing the job today. Missing some vital derails in this video!!! The evap line that goes over the vavle cover and down the back of the motor is pretty much stationary. Making it extremely difficult to get the pcv hose off the valve. The wiring harness at the front of the valve cover goes down the side of the engine and never ends. Also, many clips are holding it down to the block. I'm halfway through right now. I hope there are no more surprises.

She’s the BEST ❤

Very informative video but damn, go easy on that valve cover. You yanked the hell out of it and the wire harness.

The valve covers aren’t available on the site. Any news as to when they will be available again?

Muchas gracias por el video, voy a tener que hacerlo yo mismo, porque empezó a gotear aceite

does Jeep Grand Cherokee 2018 with the same engine has the same valve cover? I'm running into the same issue, unscrewed all the bolts but can't take of the cover it's like something is holding it still

Wow Quick I have a coilpack bolt turning in valve cover Catt get to out to change plug ? Probably have to replace valve cover

This video was extremely helpful

Did the proper way! Great job!

To every who thinks this looks intimidating the engines that still had push rods is a lot easier than the over head cam ones.

It does not come off on the passenger side. There’s more trick than the one shown.

It should be against the law to fix these. Just send everything with a 3.6 to the crusher!

The 3.8L was way easier…..on the passenger side at least.

What happens if you put the cam actuators in the wrong place? I have a 2016 dodge grand caravan. Changed rocker arms and lifters on bank 1 (right) put everything back together and all lined up... cranks but won't turn over to completely start...

Must be a 3.6 my 07 is a 3.8 and you don't have to take the engine apart to do this....

Jeep , junk