Replacing a leaking Volvo/Mack Meritor Pinion Seal. Have a repair Request? Want help figuring out what's going on with your Tractor? Drop a comment and hit that subscribe button & bell!!
@@StayingBack71 Yes -- you're right -- you can see at 12:35 that the socket is 2 3/16". He's using a Sunex 470D, with an adapter for that big 1" drive impact wrench (the Sunex 470D is 3/4" drive).
Most likely the oil is coming from around the adjustment collar for the pinion, if you can move it like that oil can come around the threads and the new seal will do absolutely nothing, we’ve been running into this a lot where I work
Hey bud i have a 1996 international eagle 9200 and im getting a loud clunking noise when under stress on a load and it sounds like around the driver side, what can it be, it happen more when going up a high at low speed loaded ?
I just paid to get mine fixed in a shop in South Carolina two weeks ago. It’s leaking again and I’m wondering what could be the issue and cause it to leak again. Could it be my yoke, splines or was it just simply installed wrong? Any help would be greatly appreciated. I live in Nc and I’m looking for a reputable shop to help me out.
Odie Miller if the mating surface where the seal seats wasn’t cleaned well enough, it will surely leak again. Also, if the seal wasn’t evenly pressed in or banged in like in this video, failure could occur. If the yoke isn’t marked and reinstalled in its original position, even one spline off could cause excessive vibration. This could also cause failure.
@@interstateceo303 it it's not leaking much you can drive to get it fixed. I've driven 2 days once to get home, just kept checking the oil after a drive day and top up. It is an out off service if if dot inspected, but beside that you need to drive carefully, do many stops to inspect if the leak gotten worst, and do your best to get it fixed as soon as possible. Be safe.
