How to Replace Rear Drum Brakes 05-15 Toyota Tacoma

Подписаться 540 тыс.

Просмотров 268 тыс.

50% 1

Buy Now!
New Brake Shoe & Drum Kit from 1AAuto.com 1aau.to/ia/1ABD...
For drum brakes and parking brakes, shoes will eventually need to be replaced. If you are overhauling your rear brake system, or just need to replace worn out shoes, this video will show you how to install new drum or parking brake shoes and new drums on your 2005-15 Toyota Tacoma.
• Check here for more videos on the 2005-15 Toyota Tacoma • Toyota Tacoma 2005-15 ...
This process should be similar on the following vehicles:
2005 Toyota Tacoma
2006 Toyota Tacoma
2007 Toyota Tacoma
2008 Toyota Tacoma
2009 Toyota Tacoma
2010 Toyota Tacoma
2011 Toyota Tacoma
2012 Toyota Tacoma
2013 Toyota Tacoma
2014 Toyota Tacoma
2015 Toyota Tacoma
Tools you will need:
• Pry Bar 1aau.to/obZ/1AX...
• Metal Cutters
• Pliers
• Ratchet 1aau.to/oiT/1AX...
• Torque Wrench 1aau.to/oe3/1AX...
• Copper Anti-Seize
• Rust Penetrant
• sanding disc
• Chisel 1aau.to/oY/1AXA...
• Hammer 1aau.to/obS/1AX...
• Wire Brush 1aau.to/oaq/1AX...
Subscribe: / @trq
Check out our playlist:
Toyota Tacoma 2005-15 2nd Gen: • Toyota Tacoma 2005-15 ...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Опубликовано:

14 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 192

@TRQ 3 года назад

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

@davidnava6320 2 года назад

Thank you for your help! I will go ahead and fix them brakes

@charlestimmons2090 3 года назад

Did I actually find someone that makes concise professional how to videos? Mother of god

@TRQ 3 года назад

+Charles Timmons Thanks for watching our video! 1aau.to/m/Shop-TRQ

@SA-bu6ev 3 года назад

have never done rear brakes and now from the looks of things i think i'll let the mechanic do it. I thought the video was extremely well done. Can't stand videos with tons of unnecessary content like so many and this one was not only high quality video but has total respect for the viewers time. I loved it. Thank you

@littlebrother3544 3 года назад

Best video ever. Never done drum brakes before. After seeing video it took two minutes to remove brakes so I could pull axle to change seal that was leaking gear oil. You made a scary job to a 10 minute job. And a 500 to 1000$ job go to 10$ seal and 4$ can of brake cleaner . And the new gear oil for rear differential 25$. 39$ total and 30 minutes . God bless you

@TRQ 3 года назад

+little brother Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ

@sheno993 3 года назад

Thank you for your professional video, I just did the brakes on my 2012 tacoma, I'm not a mechanic, I followed the instructions on video and everything went perfect, of course it took me 4 hours, but I learned a lot.

@TRQ 3 года назад

+sheno993 Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ

@SB-ic2kl 2 года назад

@@mronemanband1 It would have cost more than $400 with new or turned drums and a few hours of your time anyway. Plus you know it was done right.

@joeblow9850 Год назад

@@SB-ic2kl costs $180.00… not sure where you get $400.00 from but ok. 🤡🥊

@michaelfalkenberry1597 Год назад

@@joeblow9850 pretty sure he meant if you paid a mechanic to do it instead of doing it yourself

@Vincetheprinces 4 года назад

Thank you... I appreciate the step by step instructions with no nonsense or B.S ... straight to the point. Gave me the confidence I needed ..

@roadswithaview9077 3 года назад

Word of advice don’t use cutting pliers for pulling those springs like he did .

@LOCALNOMAD909 3 года назад

i thought the same thing

@notcharles 3 года назад

Right Arm! Not a good idea at all. Its why god made needle nose pliers!

@donh8223 3 года назад

Needle nose vise grips FTW

@littlebrother3544 3 года назад

My needle nose kept slipping . The wire cutters helped me disassemble in 2 minutes. I spent 30 minutes with 3 needle nose slipping. The side cutters made it to easy. I had to remove all brakes to pull axle to change axle seal gear oil was pouring out. I had no time to waste on springs. Best video ever

@Scrapla1 2 года назад

I know right I was like does this guy not own any needle nose or anything else lol

@malone628 3 года назад

I’d never done drum brakes. This video was incredible! Walked me right through everything. Thanks so much!!

@tofertallman2512 2 года назад

Whenever I need expert advice when working on my veericle, I come see Don first. You're the man!

@lpomm2836 Год назад

After digging into my rear brakes I realize my struggle was due to NOT watching this video. LOL Great detail!!!!! Success is in the details AND order by which you disassemble these Toyota drum kits. After watching your video I can now do the job in confidence!! Thanks for your great work!

@miewzic 3 года назад

Thanks a ton for posting! there's no way I could have done this without instruction. Also you make it look real easy. sign of a good mechanic.

@LBS4 2 года назад

Best auto mechanic advice/how-to channel on RU-vid IMO. Thank you for detailed, step by step instructions on, most importantly, real world used vehicles!

@robbiehagy63089 2 года назад

This man should be getting paid for this video!! You have made changing drum brakes a breeze and drum brakes can really suck! Great job on a great how to video.

@frankbecerra-l3l 9 месяцев назад

One of the best replacement videos I've ever seen. Great work and thanks for sharing.

@jonsmith2265 3 года назад

Great video! I hate doing modern drum brakes but this shows many useful tips for dealing with all the levers and attachments the older vehicles didn’t have. Loved it.

@TRQ 3 года назад

+Jon Smith Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ

@pierogi210 3 года назад

Great Video. Right to the point. Covered all the know abouts. No useless talking.

@TRQ 3 года назад

+Paul V Thanks for watching our video! 1aau.to/m/Shop-TRQ

@junie350 Год назад

Never replaced my drums or shoes before 160k miles. Thanks to your video I was able to get it done in like 5hrs 😅 Great video thanks for the help.

@iipr7999 Год назад

Great video. Much more involved than the fronts. Think I’ll pay a pro to do this job.

@jelaniwhite3994 8 месяцев назад

I just got done doing mine on 2010 Tacoma. Very helpful, I appreciate it

@Bidoluck 10 месяцев назад

Excellent video. One minor suggestion for the drum brake newbie is to spend a little more time with the seating of the adjuster arm and spring. Believe it or not, I did not properly seat the adjuster arm fork into the brake pad first time around. Also, I did not have the hole in back of the hub to pull the shoe in. I used a strap and ratchet around both shoes in. Worked fine. Thanks again. The video is great and a h😊uge help.

@TRQ 10 месяцев назад

+Christopher Lovell Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ

@infin1ty850 3 года назад

I really wish Toyota would just finally switch to disc brakes in for the rear wheels.

@nhan24471 Год назад

Thank you very much for the video. very easy instructions to follow. No special tools needed.

@jascam1 4 года назад

Great Video, clear and to the point , no crappy music. Remind me of my 9th grade automotive shop class.

@ronaldsekula8301 11 месяцев назад

Thanks. That’s the best how to video I’ve seen. Very well presented!

@michaeldaugherty4235 Год назад

Thank you for the info. Would have taken me much longer to do the job without this instruction. Good job.

@bustamantepatricio 2 месяца назад

El mejor canal de mecánica que he visto ……..( suscrito ) 👍🏻

@Flyanb Год назад

Great video excellent lighting! Best I’ve seen yet. I haven’t done drum brakes since 1992 so this was helpful!!!

@rustycaveman 2 года назад

the order of disassemble , the fine details were so helpful in me doing this on my own today. thank you .

@k.pathirana.8868 10 месяцев назад

Explanation and Video quality is very good. Thanks 👍. My congratulations.

@Bathygnostic 3 года назад

Great job! I've always had decent luck using a fairly inexpensive pair of needle nose vice grips on spring removal and placement.

@joeblow9850 2 года назад

Yes. Much better choice than using wire snips. Smh 🤦‍♂️

@bigmancleverman989 Год назад

Outstanding instructional video. Thank you.

@docsamson2299 2 года назад

Love these instructional vids! Thank you for taking the time to do this! One question: Can you use the silver anti-seize or does it NEED to be the copper?

@SirockaG 11 месяцев назад

Followed this to change the brakes on my truck. Great video, but should include instructions on adjusting the tension for the e-brake cable, since that's usually loose after a rear brake change.

@DarylSandberg 4 месяца назад

Great video. Extremely helpful. Thank you very much for your effort.

@marcioreis2648 3 года назад

Awesome video. Keep up the great work. A real step by step with explanation and tips. I'll use your video to do mine.

@TRQ 3 года назад

+Marcio Reis Thanks for the feedback! 1aau.to/m/Shop-TRQ

@phoenixrising7623 2 года назад

thank you for posting this video really help me out well done👍

@joeblow9850 2 года назад

New subscriber. Thx for the excellent video. I’m going to attempt this next weekend. Fingers crossed!! 🤞

@Ryanandfriendsofficial Год назад

how'd it go

@chocotoynk2931 2 месяца назад

Lol i am waiting for those springs to snap when i saw that diagonal cutter 😂

@Numberjack95 3 года назад

If you are wondering the brakes on the 16-20 Tacoma are exactly the same. I used this video to replace the shoes on my 2017 TRD Sport. @TRQ please change the title to include those years as this is the only tutorial video online showing how to do this properly.

@kurtlittlefield6321 4 года назад

Absolutely awesome video!!! Perfectly done, to the point, awesome job!!!

@TRQ 4 года назад

+Kurt Littlefield Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ

@joeblow9850 Год назад

@@TRQ same generic response for everyone huh? Very personable. 🤦‍♂️

@RicksAutoworks 2 года назад

Excellent Job making the Video, Thank You!

@freddiecastro3598 3 года назад

Awesome video thanks very professional mechanic!! 👌👌

@brianc6739 4 года назад

Let’s give this a bump. Proceeds to what the piss out of it😂awesome video tho it was exactly what I was looking for!

@jimdotdev 4 года назад

Haha thought the same but have been there. Been a while since I've done drums

@wayneboehm8139 4 года назад

Very good video not a lot of people show you drum brakes 👍🏻💪🏻😎

@tristansaxon9580 3 года назад

I can only echo everyone elses comments. Very well done and to the point. Thank you so much.

@joshuaw7376 3 года назад

Great video. very thorough and to the point. Much appreciated.

@dannykyro3027 3 месяца назад

*Read first and watch full video before job* List of helpful, overlooked tips: -First, chock your front wheels and put the truck in NEUTRAL before pulling drums. Not mentioned in video. -If you don't put in N, do NOT function brakes with drums off (you need to function brakes to shift into N with an automatic). Wheel cylinders could overextend or jam shoes on backing plate. -To remove drums, first back off adjusters until drum rotates freely. Use the two bolt holes on the drum to tighten in two M8-1.25x50mm bolts, alternating as you tighten. Hammering the drums should be a last resort. -Take pictures before you begin. -Blasphemous, but those side cutters will help you out a lot with the springs. Pliers are going to fling the springs across the room and take longer. -Brakleen AFTER parts have been removed. -A sanding disc will take out too much material. Use a die grinder with a wire wheel instead. -If using a wire brush, wrap it with a rag. Cleans better and keeps your brush clean. -Disconnect the parking brake cable. It's very easy to reattach. -Prior to putting on the drums, ensure the assembly is centered by checking the gap from the lip all the way around. This will help the drum go on without contacting the shoes. -Your lug nuts may not be deep enough to mount the drum without the wheel like it's done in the video. Use washers or spacers or a different nut. As for the video, excellent instruction, thank you. I'm not a mechanic and couldn't have done it without your help. I'm looking forward to more videos done for 2nd Gen Tacomas. Ps: I love the invented names for some of the parts. Premium, inconspicuous trolling, my man.

@SamualShark Год назад

Couldn’t have done it without you!

@4drvette95 Год назад

Thanks for the detailed video. I have one issue. After completing the brake pad change, my brake pedal is now soft, I never touched any of the bleeder valves. I'm going to bleed the brakes, but before I do, I'd figure that I would ask the question on why the brake pedal is soft? I did pump the brakes multiple times and I also took it for a test drive. Thanks in advance

@oberurselts 4 года назад

Great video! I have an 05 Tacoma PreRunner that has 160,000 miles and still runs great and is mechanically sound. Probably because I can work on it myself. I attempted doing the rear brakes, which are shoes a couple of years ago and finally went to the dealer to get them done. After watching this video, and I am certain I can now do the job when it comes up again. The "diagonal cutting pliers" appear to make removing a number of the springs and clips for the shoes a "must have" tool. What size diagonal cutting plies did you use?

@stevanrose7439 3 года назад

It’s not good practice to use side cutters to remove the springs. What I have found in the past is needle nose pliers with heat shrink tubing on the noses. You don’t want to nick the springs because it could brake there. Even a fisherman doesn’t like to nick his hooks with pliers

@joeblow9850 Год назад

@@stevanrose7439 very good idea. I’ll use this advice

@michaeloneil1851 3 года назад

Great video. A few questions.... Can you use regular aluminum anti seize, do you need to bleed the brakes, and do you have to compress the pistons in the wheel cylinder?

@stevanrose7439 3 года назад

If you don’t open the bleeder you don’t need to bleed the brakes. And you can push the wheel cylinders back by hand.

@Jose4416 3 месяца назад

Excellent work thank you

@VFRDon 2 года назад

Great video, very well done. While I can see the advantage of using diagonal cutters for grip, watching the springs being grabbed by the cutters made me cringe. Unless I was having trouble holding on to the springs I would prefer to use needle nose pliers. One question, I didn't see or hear any mention of the parking brake. Not sure about the Tacoma but on many cars you need to release the parking brake first or the drum on one side won't come off, at least not without the risk of damage. I'm going to go pull mine off to inspect the brakes so I'll find out then. Not sure I'd hit the drum with a mall or hammer. If a rubber hammer or soft blow hammer won't get the drum off put two bolts into the holes on opposite sides of the drum (between the studs) and walk the drum off without beating on the drum. Thanks for the excellent instruction.

@jrbling25 3 года назад

Can you use the copper anti-seize for all the mating surfaces? as opposed to the brake lube

@marvinmartion1178 2 года назад

Copper and steel should never contact one another! The Copper will corrode the steel real fast!

@garya9875 Месяц назад

Great video very well done.

@VaniaVenom Год назад

Do you have to put the passenger breaks on mirrored from this video? Like, is it backwards for the passenger side?

@GatesRapes 3 года назад

I've found backing off the self adjuster takes tension off the springs making them easier to pull off

@joeblow9850 Год назад

Wait…?? What?? How? I’m getting ready to do my brakes this weekend… what did you mean?

@kevinpilotte8738 4 года назад

Toyota recommends cleaning the hub flange and installing the paper gasket that it originally came with between the drum and flange. It can affect brake noise. There is actually a TSB about Tacoma rear brake noise. Nice video.

@LevisPunk 4 года назад

This was awesome, great video!

@todosube Год назад

Nice vid man

@na1975te 4 года назад

Best how to video I’ve ever seen!

@TRQ 4 года назад

+na1975te Thanks for watching our video! 1aau.to/m/Shop-TRQ

@flymrd 2 месяца назад

it goes so easy for you.

@yomommaissofat1745 3 года назад

Great informative video. Doing mines tomorrow

@joeblow9850 Год назад

Love your name!! 🤣🤣. Yo mommas so fat she’s got brake drums in her hips!! 🤣👍

@dougbranch8201 6 месяцев назад

Thank you! Very good!

@quickdraw42 2 года назад

thankyou for the excellent information....

@leogetsome 3 года назад

Awesome tutorial brotha 👍🏼👍🏼

@cmscustoms4400 2 года назад

Ok so I followed this exact process. My brakes were actually pretty decent but I changed them anyways because the drums were rotted. Now I adjusted the drag properly, but my brakes feel very soft at the foot and don’t engage until I’m 1/2 way to the floor. Do I need to increase the drag? The tensioner with the star adjuster in it had way more threads showing when I took my drums off. Maybe 14 threads were showing and now maybe 4?

@iansheppard3560 3 года назад

Honestly I was told to never use a real hammer on brake drums, especially if your gonna re use the drum and only do the internals because it can dent the drum pretty badly.. if your gonna replace the whole drum obviously not an issue but I just thought I’d say that lol I always used a deadblow hammer for this kind of stuff

@FurthurOffRoad Год назад

Great vid. Thanks!

@vbtaco 7 месяцев назад

My spring unit (blue spring @frame 9:09) is really hard to put back. My spring cap keeps falling off. How are you able to make your cap stick to the blue spring?

@DanielDiaz-gj1du 3 года назад

That guy did a great job awesome

@frankarevalo7020 3 года назад

That orange spring will haunt my dreams for the rest of my life

@TRQ 3 года назад

+Frank Arevalo Thanks for watching our video! 1aau.to/m/Shop-TRQ

@babybugspaw7085 3 года назад

Just curious,, why would you recommend using cutters to remove springs (but don’t cut the springs) instead of needle nose pliers? I’m not trying to be a smart ass either, just a question.

@marvinmartion1178 2 года назад

I replaced mine but now have low brake pedal! Almost to floor! Trying to adjust with emergency brake in reverse but not working! Tried to adjust from backside of drum manually but not sure if I'm doing it right.

@BackTrackMask 3 месяца назад

What do I do if the drum has developed a lip and it won't let go of the drum?

@maxplank4083 Год назад

Excellent!

@maxplank4083 Год назад

Excellent!!

@redpilllense7125 2 года назад

Great video, but I'm confused about one thing; at the end, why is it necessary to adjust for drag on both sides simultaneously? Can't I do one side, slap the wheel on when done and then proceed to the opposite side and adjust for drag then? Is there something going on that won't allow to fully adjust for drag on one side first? Any clarification is greatly appreciated. Thank you 🙂

@joeblow9850 Год назад

You can do it exactly the way you specified. There’s no reason to do them both at the same time

@suspectabk8162 3 года назад

at this point i lost count on how many times this dude said "at this point" LOOOOOL

@sergio1179 2 года назад

Do you have to have have the truck in neutral while turning the drum on the wheel while checking the adjustment? The final step?

@joeblow9850 Год назад

Yes you do

@VegasBugs Год назад

I have a 2011 Tacoma 2wd 2.7L 4 cyl. I assume these drums are the same as my truck. I have a problem. I had a shop do the drum brakes and shortly after they did it, I had a spongy brake pedal. I see no fluid leaks. Is it typically air in the lines causing that? Could it be an internal leak in my master cylinder? The pedal goes down a little over half way to the floor before it starts engaging. It's kinda scary. I want to bleed the lines first, then go from there. Anyone have advice on this?

@jrh11254 3 года назад

Excellent video!

@jahsonblyden3994 5 месяцев назад

I have a 2010 Toyota tacoma trd off road access cab I never change the rear brakes since I got it I call to ask the Toyota where I live if them had rear brake for my tacoma they ask what size I couldn't tell them they said 10 or 11 i ain't know what that mean so can u help I sum one ans tell I the correct size to get for my rear brakes