How to Replace Rear Drum Brakes on a Honda Civic

Подписаться 69 тыс.

Просмотров 286 тыс.

50% 1

How to Replace Rear Drum Brakes on a Honda Civic. How to Replace Brake Shoes on a 2005 honda civic. How to Remove Brake Drum. How to Change and Adjust Rear Drum Brakes on Honda's. How to Properly Adjust your Drum Brakes. Step By Step Guide to Replacing your Drum Brakes. This video available in spanish(este video disponible en español) • Como Cambiar Frenos Tr...
Vice Grips - amzn.to/3ifEZhU
Brake Drum - amzn.to/2FegJyj
Brake Shoes - amzn.to/3k2TN3V
Brake Cleaner - amzn.to/2QfOtx3
Anti Seize - amzn.to/339dG2q
Torque Wrench - amzn.to/39z6Wl9
Backyard Chevy is a participant in the amazon affiliates program. As an Amazon Associate I earn from qualifying purchases.
I assume no liability for anything you choose to do to your own car. All Repairs you perform to your car are performed at your own risk.

Авто/Мото

Опубликовано:

24 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 564

@user-2Hteyasizyc Год назад

BEST tutorial on this on youtube. Clear lighting, perfect quick editing, calming, No fumbling around. Tricks and tips that werent on other vids. Thanks man.

@chriskaprys 8 месяцев назад

Ditto. This is so clear and useful. Thank you!

@jazzbox35 5 месяцев назад

Yes, very well done.

@lewisvang1927 3 месяца назад

i thought other videos were good until i found this video. #1 and plus the sound of dragging too..

@bladeshifts5635 2 года назад

This is without a doubt the best DIY for brake drums. I was using other videos and got so lost, ended up stripping it all down again and followed this and did it in 15 minutes.

@backyardchevy328 2 года назад

Thank you🙂 well im definitely glad that i made this video to be able to help

@bryanwashington6504 Год назад

The very best informative yet

@srarcade 2 года назад

You make this job look easy! To anyone sizing up this task, I've done everything on cars over the past 25 years.. except drum brakes. That said, I discovered there is no amount of cussing in humanity to curse this dreadful experience. I would gleefully drop my steering rack, or replace the synchros in my transmission over doing this horrid task ever again. I hate letting anyone touch my cars for service but I think this is one job I would take to a brake shop to have done to hold on to my sanity.

@backyardchevy328 2 года назад

Maybe its cause ive done so many of em, but i think i would rather do these brakes than those tasks lol.

@cgroom1 2 года назад

Agreed. Never touching these god awful brakes again

@mikew1368 Год назад

@@backyardchevy328 It seemed straightforward to me. I removed the wheels and drums to inspect today, and I'm down to less than 1.5mm brake shoe thickness. My drums on the inside look smooth. I don't see any leaking seals, and the springs all look good. I didn't check the horseshoe clamp, but I plan to reuse it as you showed. Crossing my fingers that it all goes well. The new shoes are only $22. New drums are only about $30, and they certainly are easy to replace (I got the M12x1.25mm bolts).

@annewilliams186 Год назад

😂

@AiMR Год назад

@@mikew1368 Agree. 1.5mm is cutting it pretty close bro 😂

@svlotoy 11 месяцев назад

By far the best, most precise DIY tutorial video on RU-vid. Very clear and concise and like others have mentioned no fumbling around, no added nonsense right to the point. You had me finish the drums on my daughter's 2000 civic in 30 mins per side. You earned a sub!

@mikew1368 Год назад

That was so professional! I contact Honda service techs, and they couldn't answer my questions after I went over the procedure in my Haynes manual. I did my front disc brakes and brake fluid exchange after watching other videos. I'm hoping my drums are still fine and I can just clean them with brake cleaner. Thank Heavens for people like you!!!

@19guitarshredder Год назад

Started tearing down my one rear drum and got frustrated. Your video made things significantly clearer. Hopefully finishing tonight. Thank you for the video!

@mixxmstrmike Год назад

I'm going to reiterate what others have said. This is THE best video I have watched for rear brake shoe & brake drum replacement. Lighting, picture quality, editing, tips & safety precautions... all in this video. I have included the link in my online maintenance journal for future reference! Subscribed!

@kumingo 3 года назад

Best brake from DIY on RU-vid

@backyardchevy328 3 года назад

Thank you🙂

@jamieruggiero 3 года назад

I agree this is a pretty thorough video

@backyardchevy328 3 года назад

@@jamieruggiero thank you🙂

@dw4940 3 года назад

Absolutely!

@mannyclemente7159 2 года назад

I was looking into other videos and this one by far is not only the best, but the way backyard Chevy presents it. It’s crystal clear 👍

@jerseysailor148 11 месяцев назад

I totally agree with everyone here saying this is the best video on here! Helped me so much with my daughter's civic brake job!

@juanleon5431 2 года назад

Simple and practical! That’s the way should be. I used in the beginning the Hayne’s instructions and it was difficult. I like this video more than any others :Simple, non too much talk and organized. Congratulations! Good job!

@backyardchevy328 2 года назад

Thank you🙂

@jameswalker1210 3 года назад

This is definitely the best vid on replacing the rear drum brake shoes. It just reminded me of the best sequence & the positions of each part so it easy. Thanks for the precise detail & explanation!

@backyardchevy328 3 года назад

Thank you🙂 i really appreciate it

@spud-from-Nam 3 года назад

Good video. I've done hundreds of these type of brake replacements but it's been a while since I was a mechanic. This video did a good job of reminding me how. Thanks.

@backyardchevy328 3 года назад

Thank you🙂

@jamesm6430 2 года назад

By far the most succinct & precise video on brake replacement. You’ve mastered it man!

@backyardchevy328 2 года назад

Thank you🙂 i really appreciate it

@RealEstateDudeDrew 2 года назад

This video was extremely well put together. Thank you so much for making it easy to do my own rear brakes.

@backyardchevy328 2 года назад

Thank you🙂 glad to be able to help👍

@jimbarron8688 8 месяцев назад

I'll add my voice to all the others commending you for a very informative and professionally done presentation on this subject. Thank you.

@vincentl4691 3 года назад

On my 2014 Civic ( 0:45 ) The bolt size for the bolt to break the seized drum off of the hub is M12 X 1.25mm 35mm length (bought them at Advance Auto Parts)

@backyardchevy328 3 года назад

Thank you🙂 really appreciated

@richiemarks6207 5 месяцев назад

Appreciate the video. Through your video I was able to witness the most informative and calm brake shoe replacement other than my grand dad. I bought my first Honda about 3 years ago and my wife loves it and the rest brake shoes are in need of replacement and I've been putting it off for the past two weekends and after watching the video i don't dread it so much now. 👍🏻

@zashbot 3 года назад

thanks! helped a ton, especially since you got good shots of where everything goes.🙏 never done a drum before lol

@backyardchevy328 3 года назад

So glad it was helpful in completing ur first brake drum job🙂👍 great job🙂

@denversnider2211 9 месяцев назад

Love how you explained full details ,cleaning, and the lubing areas were important information. Thanks for a good training video.

@spdyjr1974 2 года назад

'Spent about an hour after watching another video trying to do this without success. Yours is a much easier, simpler method and helped me finish this once frustrating task. Thanks so much.

@backyardchevy328 2 года назад

Thats great! glad to be able to help🙂👍

@__Dja Год назад

I was putting long spring above the adjuster lever into the wrong hole and wondering why it didn’t have much tension on it at all and why the adjuster level wouldn’t seat properly, was so frustrating wondering what I could possibly be doing wrong, rewatched your video and realized I wasn’t putting the other end of the spring in the right hole, realized what I was doing wrong and grabbed some tiny vice grips and struggled but got it to go in the correct hole and then the adjuster level sat correctly. Lol it’s so great when you finally realize the simple thing your doing wrong and get it corrected, thanks again

@backyardchevy328 Год назад

Yea definitely a good feeling when u find out why its not going together properly🙂👍

@willrogers9066 3 года назад

Couldn't have done my brake job without this video. However you must be a master mechanic. You made it look easy, especially the main spring!!

@backyardchevy328 3 года назад

Thank you🙂 really appreciate ur comment🙂

@melissaschilthroat7717 2 года назад

Thank you for the video!!! Awesome! Explained perfectly and really clear shot of what to do. Looks like a huge pain compared to disc brakes but do-able now with the help!

@backyardchevy328 2 года назад

Thank you🙂 yea the first time they can be pretty annoying to do..but definitely doable

@j.k.d1410 3 года назад

Excellent video. Great descriptions, steady camera, good lighting and plenty of "if this happens." Thanks for the great instructional video.

@backyardchevy328 3 года назад

Thank you🙂

@fishman6284 Год назад

great video complete with all the steps unlike the other videos, removed and replacement springs in order thank you

@jaredcoffin3907 Год назад

Really helpful. I’ve always considered myself a “disk only” guy - until now! Im ready to take on the job👍🏻

@youaremessed7947 2 года назад

Excellent video. Clear and to the point with good camera work. Used for a 2010 Honda Civic. Thank you !

@backyardchevy328 2 года назад

Thank you🙂 so glad it was helpful👍

@oakdaletech 2 года назад

Thank you so much for this video! I redid mine and replaced a broken brake cylinder. Your video was extremely helpful!

@backyardchevy328 2 года назад

So glad to be able to help🙂 thank you for the support

@Burlehmangus 2 года назад

Thank you so much for this. About to do the drum brakes on my 07 Honda fit (same exact brakes). So many videos advocate for putting the brakes back together by attaching the shoes with the top spring and the adjuster rod first then trying to hold and hang the whole assembly over the top…all the while complaining you need three hands to do it well lol. This way makes it so much easier.

@backyardchevy328 2 года назад

Lol..yea everyone has their preferred methods, hopefully all goes well..good luck🙂👍

@captainslav6528 3 года назад

Excellent video not a single wasted word and no details left out.

@backyardchevy328 3 года назад

Thank you🙂

@juliusararacap2363 Год назад

This video is so helpful and really precise you can see clearly how to do it in step by step.. very awesome thank you for the video I learned new things

@peterleo16 10 месяцев назад

Very well explained and a fantastic video. Have a better understanding on the brake adjuster now as always wondered which way to turn.

@wattage Год назад

So glad I found your how-to. Doing this next week on my car. Excellent video! Crystal clear steps and patient explanation covering exactly how to do it. Thank you!

@GregChatham Год назад

This was one of the best videos I have seen for replacing rear drum brakes.

@backyardchevy328 Год назад

Thank you🙂

@oq17 Год назад

I wanted to take a moment and thank you for this video - it really is perfect in all ways . As I was working along side the video , I’d get ahead in my mind on some detail - and sure enough you covered it . One small detail I messed up on - the lower part of the brakes need to be seated behind the lower flange - I placed it on top By accident and the drum rubbed on the outer face of the side of the brake pad . I’ve never done rear brakes - so it’s a small detail I won’t for forget next time . Thanks again !!

@JanoyCresva Месяц назад

Same here. Put on the back tire like 5 times trying to figure out why the shoe was grinding. Finally decided to take it all apart again (shouldve done that in the first place) and figured out thats what was rubbing.

@dads3boys 3 года назад

Great video overall. Clear instructions and good video work. One item though. I could not get the top main spring off/on using his method. No doubt he's much stronger than me. For those who find it difficult to remove and replace the spring... In order to stabilize the brake shoes, I strung several zip ties together and tightened them around the circumference of the shoes. I did this with two sets of zip ties to ensure shoes didn't shift alot and the ties didn't snap. This made it alot less strenuous to do this procedure. Hope this helps. Thanks again for the video.

@backyardchevy328 3 года назад

Thank you🙂 id have to try that

@samthibeault5649 3 месяца назад

Very informative and straight to the point. Well done thank you!

@blackrifle6736 Год назад

Thank You for a superb video. Many out there but your's made the grade. Cheers!

@malware_in_tn9008 2 года назад

Great video B.C.! Good, clear instruction, thorough steps, and great camera work. I wish you had cleaned that little smudge of anti-seize from the front of the dust shield to make sure none got onto the brake shoe, but other than that, one of the best drum shoe videos I've seen. Two thumbs up!

@backyardchevy328 2 года назад

Thank you🙂 yea i should have

@bramapanday9505 2 года назад

Man !!! You the best . Quick an tooo the point ,great camera angles . Every video has sooo much fluff , I don’t comment or subscribe much , but for you A+++

@backyardchevy328 2 года назад

Thank you🙂 i really appreciate the comment and subscription

@donnymac1307 Год назад

I used this video tonight to do a 2015 lx Update: 12mm bolt for the hub (same as the lugs), and the adjusters are side specific ( left/right). Thank You!

@soyboyy1994 2 года назад

You make this look super easy. For anyone attempting this repair, it's definitely challenging, but not impossible. Give yourself ample time, maybe get a helper, and get all the parts and hardware beforehand. Be careful with the brake cylinder thing with the bushings, it's very easy to push it out completely and get air into the system. I got air into mine and am taking it to the shop to get the brakes bled. Overall, tough but worth it. You learn a lot!!! Thank you for this video, it's a gem!!

@backyardchevy328 2 года назад

Thank you🙂 very good precautions👍

@mikew1368 Год назад

I made the same mistake. I fitted the seal back onto the wheel cylinder and then I bled out the air in just the rear brake lines and fortunately the wheel cylinder seal is holding and everything is working well. I was too aggressive trying to remove the main adjuster spring and pulled off the seal on one side. I need to work out more to manhandle those vise grips. Pulling while guiding the spring end into its slot was crazy difficult for me.

@VoicesofTbec 11 месяцев назад

Me too!!

@DeclanLangenfeld 6 месяцев назад

@@mikew1368question - will this stop you from being able to put the drum back on? That’s the current problem I’m having. Thinking it might be because air got into the system. Adjuster is already in as much as possible

@mikew1368 6 месяцев назад

@@DeclanLangenfeld I used brake cleaner and a rag to clean up the brake fluid that leaked out of the cylinder first, and then bled out the air. Finally I got the cylinder compressed and replaced the drum with no trouble. I think if you bleed the air out first, the drum will fit. Also it helped me determine if the cylinder was not leaking. When the rubber boot wasn’t fit well. When I pumped the brake it caused brake fluid to squirt out. I thought I might have ripped the rubber boot and needed to replace the cylinder, but no leaks observed, so I was happy and everything worked fine after I finished and tested it.

@jairor1337 3 года назад

Your a king! This help me so much with fantastic camera angles to help me see everything!

@backyardchevy328 3 года назад

So glad to be able to help🙂 thank you

@razvanpoenaru 2 года назад

@@backyardchevy328 that top spring was very hard to put back you made it look so easy, but in the end I finished the job properly thanks to your video. I still have a problem with the ebrake, like after adjusting it was going 5 clicks but after using the car a bit again went to 8 clicks and is not holding, I adjusted again but still not happy is not holding the car if I put in drive and press the gas, should I adjust the cable from inside?

@backyardchevy328 2 года назад

@@razvanpoenaru yea sounds like ud have to adjust it on the inside cause the brake shoes will only adjust so far to be drive able

@2d120587 2 года назад

the "specialty" tool to remove the clips is not needed. Thank you Sir. Great video 😌

@backyardchevy328 2 года назад

@@2d120587 thank you🙂

@David-fy3bi 10 месяцев назад

Super how to on civic 8th gen rear drums. Great views of everything. I will be using this as my primary instructional go to on my 2008 civic lx. Thanks.

@eliasorozcoestrada Год назад

I’ve been watching your videos for a long time. I love it. In this video at 3:50 the bottom sprain you put it maybe backwards I don’t know if it makes any difference.

@johnpolvere2941 2 года назад

Very good , i was trying other videos & this one was the one that explains it well & really helped me complete the job , thank you

@backyardchevy328 2 года назад

Thank you🙂 and great job👍

@DTWC 3 месяца назад

Haven't done drum brakes since the 80's thank for refresher course. I'm in awe any company still uses them. Lol

@yzmoto80 2 года назад

Drum brakes are a marvel of engineering ! They are incredibly sophisticated, yet incredibly simple at the same. Most all drum brakes have the same engineering built into them, and after you have done a handful of them, you will realize there are only a few basic principle parts built into them. They are super easy to work on, and any of you watching this video will agree after completing your first drum brake job, they are just simple-simple ! And they keep getting easier, once you have a few under your belt. You just kind of develop your own little “tips and tricks”, to get it done right. Great video !

@backyardchevy328 2 года назад

So true and well said..at first they do look very intimidating but yes once u have a couple done they just go quick and easy..i think hardest part for me is that horseshoe clip lol

@yzmoto80 2 года назад

@@backyardchevy328 ...Thank you my friend ! And yes .... those dang little horseshoe clips...LOL !!!!

@marsov100 3 года назад

Thank you, I've never done drum brakes before, this video made it easy.

@backyardchevy328 3 года назад

Thank you🙂 so happy to be able to help

@richmartinez2748 2 года назад

This is the best drum shoe replacement video Ive seen. Well done.

@backyardchevy328 2 года назад

Thank you🙂

@dattan3473 Год назад

Hi I like to watch you video you show very good slow and step by step so people can understand plus me I’m appreciate you have a good technique thank you again god bless you 👍👌

@Speed00007 9 месяцев назад

Outstanding video! This guy actually knows what he is doing!

@mikeclough8803 Год назад

Bro this guy is extremely good at tutorials... awesome!!!

@jeffkeryk3550 3 года назад

Well done and thank you. Gotta do a '98 Accord LX this weekend. 120K, back brakes have never been touched. I think the drums should be fine...

@backyardchevy328 3 года назад

Thank you🙂 yea as long as they havent gone down to metal and the drum is even it should be good....hope everything goes well

@steveboone5450 3 года назад

Thank you. This was an excellent detailed description for the Civic drum brake service. I really appreciate your clarity and all the tips and explanations. At the end, I thought it would be best to back the adjuster off a bit more to remove all drag (but still be super close) since I always thought the shoes should not be in contact with the drums (unlike pads that are supposed to drag lightly on rotors) until you hit the brakes (and the auto-adjuster will keep it just off the drums). Do you feel it is best to leave a little drag?

@backyardchevy328 3 года назад

Thank you🙂 well when u adjust and it free spins but u can begin to hear the slight drag is best..but if u get it close the adjuster will adjust the rest if need be, so u can back it off a lil if u prefer...both are good to me

@steveboone5450 3 года назад

@@backyardchevy328 Awesome. Thanks for the quick reply. I will have to check out more of your content. You are very good at explaining things.

@backyardchevy328 3 года назад

@@steveboone5450 thank you i really appreciate it🙂

@khaibui3575 2 месяца назад

thank you so much , watch so many video and this is so far the most clear and easy to follow. ill try to replace my brake this weekend. btw this process work on accord 2006 too right?

@MansuDC2 Год назад

Very nice DIY informative video, makes me feel confident to do the job on my 2004 civic sedan. Awesome.

@cae7849 Год назад

how dod u put the top sprig

@SSSDrongo 9 месяцев назад

BEST TUTORIAL VIDEO HANDS DOWN KEEP UP THE GREAT WORK BRO 🤟🏽📈

@lynnlittell9172 3 года назад

TY! I think I can do this now. Yours is the best video so far that I have watched

@backyardchevy328 3 года назад

Thank you🙂 im sure youll be able to..good luck🙂

@pablogutierrez1009 2 года назад

Very nice presentation. Clear, concise and thorough. Thank you.

@backyardchevy328 2 года назад

Thank you

@phillipchau1004 2 года назад

Nice video. Very clear and straight to the point! Thanks for posting.

@backyardchevy328 2 года назад

Thank you🙂

@keylargodave100 3 года назад

One of the best how-to videos I've seen, great job

@backyardchevy328 3 года назад

Thank you🙂

@dereksmith1726 5 месяцев назад

Great video! Explained EVERYTHING perfectly

@xiander79 2 года назад

wow, I watched 2 other videos by mechanics, and yours had 3+ tricks that they didn't show on it, thanks!

@backyardchevy328 2 года назад

Thank you🙂

@claybishop3791 Год назад

Thank you sir! You made this appear so easy it should only be a two beer job.

@cedricraywilliams Год назад

Best video I've seen for this job. Thank you Sir!

@RM-hk5ds Год назад

Do I need to bleed the brakes after I do the drums ?

@tinajordan9403 2 года назад

Great video. To the point, clear and great visuals. Thanks

@backyardchevy328 2 года назад

Thank you🙂

@dmm5615 2 года назад

Helped a lot! Just fyi, for my 2012 Honda Civic the screw to get the brake drum off was 12mm x 1.25. Thanks!

@backyardchevy328 2 года назад

So glad to hear it🙂 thank you

@jeyroot 3 года назад

Very well done!, Thank you for taking the time to teach us. I appreciate it very much.

@backyardchevy328 3 года назад

Thank you🙂

@izzycamaro 3 года назад

Great job, I'm doing those rear brakes now and you help me a LOT. Thanks a lot.

@backyardchevy328 3 года назад

So glad to be able to help🙂 thank you

@oldrestless 3 года назад

How hard was it?

@oliviersavard8676 3 года назад

@@oldrestless answering for him, just did one now and those GODDAMN SPRINGS are SO TIGHT, whether you've done it only once or a hundred times I feel it will always be just as hard, although everything in mine was completely rusted out

@GC-zj2ou 4 дня назад

We done !! Likes just hope I can do my brake the same way as you did in this video😂

@barryemslie3470 2 года назад

Bang on! Good video, good description. No fluff, all good information!

@backyardchevy328 2 года назад

Thank you🙂

@WILLGYS 5 месяцев назад

This is high value training. You're the man boss.

@chriscerta9821 2 года назад

Great video quality and verbal instructions. Best I’ve seen. Great job

@backyardchevy328 2 года назад

Thank you🙂

@pgyesudasan4308 9 месяцев назад

I like your presentation because you have showed a to z completely

@xbrizzcakez 3 года назад

Great video. I removed my drum and saw shoes at 3-4MM. I was ready to call the dealer for an appointment, Now I called to order a set of shoes and I`m going to give it a try. Thanks

@backyardchevy328 3 года назад

Thank you🙂 hopefully everything goes well when replacing em..good luck👍

@xbrizzcakez 3 года назад

@@backyardchevy328 Thanks, on concern I have is the shoes you linked on Amazon say "doesn`t fit" 09 Civic, thats why I`m going to the dealer, the cost there is $100 for a set of 4.

@backyardchevy328 3 года назад

@@xbrizzcakez yea they would be a different brake shoe on the 06 and up

@xbrizzcakez 3 года назад

@@backyardchevy328 So an update for you Backyard. I decided to buy the OEM Honda shoes because mine were at a low 2mm, so after purchasing the set I discovered that brand new shoe pad was at 4mm?. So I`m no where near needing replacement. The shoes have been in the car for 7 years. I`m disappointed, I got your video memorized for the future though, lol. I`ll let you know the results,

@backyardchevy328 3 года назад

@@xbrizzcakez yea rear brake pads hardly wear out since most of the braking and the weight is to the front..yes definitely🙂 but the video will also be there if u ever need it👍

@leolaxes 2 года назад

Grat vídeo! You do it very carefully, this king about following your instructions for a Gen8 Civic

@backyardchevy328 2 года назад

Thank you🙂

@DwiNoviantoUntidar 3 месяца назад

I like the detail way u teach us. Great video.

@dougmcintosh9597 3 года назад

Nice job! I will now go and change my drum brakes.

@backyardchevy328 3 года назад

Thank you🙂 im sure youll do a great job..hope all goes well

@billdoran365 3 года назад

Great Vid. The adjustment portion is great

@backyardchevy328 3 года назад

Thank you🙂

@hybrid902000 Год назад

Fantastic and very thorough video! Thank you sir!

@MFSINPSA 9 месяцев назад

I have watched 5 videos. This is the best one

@TubeRippa 3 года назад

holly molly best rear rear drum and shoes replacement video! Subscribed!

@backyardchevy328 3 года назад

Thank you so much.. i really appreciate it🙂

@rogerkilburn4732 2 года назад

Awesome video. Very well done. I'm doing my wife's honda fit today.

@backyardchevy328 2 года назад

Thank you🙂 hopefully everything goes smoothly..good luck

@SukhbirSingh-rp1bv 3 года назад

Thank you for this video this is the best and easy, I seen five didn't help full, God bless you 🙏

@backyardchevy328 3 года назад

Thank you🙂

@MrNikkydems 3 года назад

Thank you for this tutorial. Two Thumbs UP!!!

@backyardchevy328 3 года назад

Thank you🙂

@juliocruz7479 3 года назад

Another great video, great camera angles and explanations. Thank you!

@backyardchevy328 3 года назад

Thank you🙂 i remember u from my starter video👍

@JACteam 3 года назад

@@backyardchevy328 yes! My next project is valve cover gasket. Do you have a video for that ? 😀

@backyardchevy328 3 года назад

@@JACteam not as of yet, but if i do..ill be sure to make a video

@michaelblack6267 2 года назад

Great video! I was able to follow step by step without any confusion. I have. 2012 Civic, so a few of the pieces were on the opposite side than the video, but it was easy enough to figure out. After completing the replacement I adjusted the adjuster screw so that everything turned pretty freely, but when I drove the car it felt like the brakes were engaged the whole time, the emergency brake, on the other hand, does not engage at all. I went back home and shortened the adjuster screw as short as it goes and everything spun freely until I drove and then the brakes stayed engaged the whole time again. It’s like the adjuster isn’t backing off after the brakes are engaged. Any ideas before I take to the shop?

@backyardchevy328 2 года назад

Well when u press the brakes the wheel cylinder pushes the brake shoes out and the return springs pull em back so they dont stick...so i would just check the return springs to verify theyre on ok...if not I'm thinking it has something to do with parking brake..definitely check the cable near the shifter to make sure its attached..and not caught on something where the cable is getting pulled..but im thinking the cable may be stuck in the pulled position somehow

@lionel9835 2 года назад

Great video.....very detailed, am going to do this break job. U teach me alot and am glad I subscribed to your channel.

@backyardchevy328 2 года назад

Thank you🙂 hopefully all goes well when u do..good luck🙂👍

@mm277hb 6 месяцев назад

this is absolutely great!! thank you!!

@georgerios7491 9 месяцев назад

Man 👍great work love the video take good care 😻👍

@jazzbox35 4 месяца назад

Great tutorial. Curious at the :21 spot you put the jack stand under the rear suspension. Is that an art form? I've been using only the side designed area to put the stand. Thank you.

@g.b.5206 9 месяцев назад

it will be a good Idea to specify the direction of the front and the back of the car and wich side you are working on to make it more clear, the video is great but I think this detail it will make it better