How to Replace Rear Fuel Tank 1992-1996 Ford F-150

Подписаться 529 тыс.

Просмотров 30 тыс.

50% 1

Buy Now!
New Fuel Tank from 1AAuto.com 1aau.to/ia/1AFG...
This video shows you how to install a new TRQ fuel tank made specifically to fit your 1992-1996 Ford F-150. A rusted, banged up, punctured, or leaking fuel tank could be bad news. If your truck needs a new fuel tank, you can install this model specific replacement tank from TRQ.
This process should be similar on the following vehicles:
1992 Ford F-150
1993 Ford F-150
1994 Ford F-150
1995 Ford F-150
1996 Ford F-150
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obgt/1A...
• Pocket Screwdriver
• Pry Bar 1aau.to/oQ9/1AX...
• 12mm Wrench 1aau.to/oTJ/1AX...
• 13mm Wrench 1aau.to/oTJ/1AX...
• 12mm Socket 1aau.to/obn4/1A...
• 15mm Socket 1aau.to/obn4/1A...
• 8mm Socket 1aau.to/oa49/1A...
• Air Blow Gun
• Air Compressor
• Fuel Line Disconnect Tool 1aau.to/o3/1AXA...
• Locking Pliers 1aau.to/okd/1AX...
• Metal Cutters
• Pliers
• 1/2 Inch Impact Gun 1aau.to/orF/1AX...
• 3/8 Inch Impact Gun
• 1/4 Inch Socket 1aau.to/obZ/1AX...
• 5/16 Inch Socket
• 1/4 Inch Ratchet 1aau.to/oa49/1A...
• Socket Extensions 1aau.to/obn4/1A...
• 1/2 Inch Wrench 1aau.to/ohe/1AX...
• Brake Parts Cleaner
• Cloth Rags 1aau.to/oBc/1AX...
• Brass Punch
• Drain Pan 1aau.to/ox3/1AX...
• Floor Jack 1aau.to/oZv/1AX...
• Hammer 1aau.to/oR8/1AX...
• Jack Stands 1aau.to/oQY/1AX...
• Pick 1aau.to/oMh/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Опубликовано:

30 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 31

@TRQ Год назад

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

@josephflores5713 Год назад

This job is so much harder laying in the dirt .. 😫

@truckstotractorsrepair Год назад

That frame is not okay lol

@kamboieyyy9998 Год назад

There is a lot to be said for the frame condition in this tutorial. No where is it that easy

@Teleman01 3 месяца назад

One thing I learned about doing this recently. ...If you're putting a new tank, you obviously don't have any gas in there. When you go to start up the new tank, make sure you put at least 6 gallons of gas or more in the tank. I 3-4 and the truck wouldn't start. I thought I had a bad fuel pump. It was driving me crazy. Then someone told me I didn't have enough gas to prime everything. And that did it.

@toddsuriner7436 6 месяцев назад

I hope the next repair is on the bluetooth shackle hanger and frame

@mdmyer Год назад

I hope this truck was just for demonstration purposes, that frame is gone.

@kkampy4052 Месяц назад

I appreciate the fact you did this on a rust bucket. Most can relate to this.

@Ad48069 Год назад

I wouldn’t trust that truck on the hoist, frame could crumple

@jarrettknipp5147 7 месяцев назад

Great video, I think there should be a gasket between the strap and the tank maybe a small piece of rubber or something. These straps might have had them there. You just can’t see them.

@sterlingebersole5296 Год назад

Btw anyone watching in my experience 13mm nut and 15mm socket is standard

@ToyManFlyer1100 Год назад

*_.....For those wondering how to hook your new pump up(with the weird wire colors)...Here's what I did a few days ago...This also presumably nobody's been there before and "dinked" up anything.. Take out your new pump...Take out the old pump, hopefully its still factory, not somebody's f-upped one...Look at/orientate the two pumps side by side...Underneath the cover plates, you will see which wire goes to where...4 connections....One wire on top will be the Common ground for the cover plate...One will go to the sender/float assy...2 will be red and black...Going to the pump...Nevermind what colors up top...Under the cover plate connections is the key...Whatever colors the factory or the aftermarket manufacturer used, hook up your wires based on where it goes - UNDER- the cover plate...Cover plate is what the Locking ring holds...It's 10,000 factory wire colors out there...Depends on if the guy was drunk that day, used Whatever colors he could see, what day the trk was assembled, what version of the trk...F-150, 250, 350, ...4.9, 5.0, 5.8 Diesel, Extra Cab, Standard cab, Long bed, short bed, or no bed...or the wire bundle ran out that day, and the Line Leader had to go to Lowe's and Home Depot and buy whatever they had in stock...Who knows...It's a "Ford thang", I guess....Mines is working great....Used "Delphi Brand" from another online reseller....No probs so far...Took me over 12 hrs to install coz that "Filler neck hose" is evil and a few other thangs that were blocking the tank from going back in...And, It's Summertime in Texas...Blazing Hot 🔥 🔥🔥🔥🔥 by 8 am and no help and "Flatbacking" on the Concrete...So yeah, Lovely conditions...But... We got it done....Now, to the front pump...Don't have a Lift...So, both tanks need to be dropped using a Floor jack and Soda Crate fabbed up together....Cheers...._*

@ingascheib8873 4 месяца назад

Bravo, I love to watch you. The ease and calmness as you work is something many don't have. It's always great to learn. Thanks for the video.

@ToyManFlyer1100 Год назад

😒😒🙄🙄.... Have to do both fuel pumps as soon as they arrive on the delivery trks....Would be nice to have a Lift and that neat jack assy....Looks like somebody fabbed it up just for jobs like this....

@seetheforest 2 месяца назад

Wow I thought my truck was rusty. Mine is showroom new. (In some places) 😊

@F150customs 2 месяца назад

This all looks like junk to me… that frame is gone… that tank would be thrown out and completely replaced new hoses and all.

@Cruiser777 Год назад

Boy, I hate working in a carrier truck like that one big rest bucket. Did you get your Tetness shot? Nice job

@FrankKrawczel 18 дней назад

This was great. Well done, not even one curse word. I don't think I could do that. Now I know what is there and where the pieces go. Thanks again!

@TRQ 18 дней назад

+@user-dy4hs4tg8e Thanks for watching our video! 1aau.to/m/Shop-TRQ

@Cherokee93 Месяц назад

The filler tube is so hard to get on

@altruisticscoundrel 5 месяцев назад

Great video!

@michaelspanier1235 4 месяца назад

Give your car "Rostumwandler Spray" (German) it will stop rust, I did it on my E150 1991

@runtz69able 6 месяцев назад

I've done a lot of those stupid spring clip Ford fuel lines which is the dumbest goddamn thing they ever came up with and they never come undone that easy