Тёмный

How To Remove And Replace OBS Ford F150 F250 F350 Rear Fuel Tank - The Removal Pt1 

Broncos and Parts Garage
Подписаться 17 тыс.
Просмотров 22 тыс.
50% 1

A highly detailed video showing the removal and replacement of a OBS Ford rear gas tank. This was performed on a 1997 Ford F350. The same process will work on Ford Bronco F150 F250 F350 with diesel or gas. Gas trucks will simply have an "in tank" fuel pump that needs to either be replaced or swapped onto your new or used sending unit. We recommend replacing the sending unit and fuel pump on gas vehicles, as it's the perfect time for preventative maintenance. We pride ourselves on showing great detail....there are no "finger snaps", and the job is done without any video of the struggles or completion of the job. Please enjoy, Like, Share and Subscribe!
#obs #bronco #obsford
Please Like and Subscribe.
Follow along on:
/ broncosandparts
@broncos.and.parts on Instagram
Email : n2kpi@yahoo.com
We sell used Ford Bronco and Truck Parts
PLEASE HELP SUPPORT THE CHANNEL IF YOU ENJOYED THE CONTENT.
PayPal: n2kpi@yahoo.com
Venmo: @broncosandparts
Cashapp: $broncosandparts
It really help with keeping the videos flowing, the lights on and with shop supplies. Thanks for your support
⬇️Links For Parts & Tools⬇️
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Jeffs Bronco Graveyard - The link below is the tank we used. Yours may be different, so please visit their website or call 248-437-5060 to ensure you get the proper tank and parts for your vehicle.
broncograveyard.
1990-1997 Ford F-Series TruckRear Tank,19 Gallon Steel, 3 5/8 Hole1990-96 Ford F150
1990-96 Ford F250 1997 Ford F250 HD 1990-98 Ford F350
Steel Gas Tank
tinyurl.com/3n...
___________________________________________
1992-1997 F-Series 19 Gal RearTank Sending Unit Diesel Item# 30398D
tinyurl.com/4e...
___________________________________________
1990-1997 Ford F Series Rear Sending Unit (gas)
tinyurl.com/49...
--------------------
Ford Truck 8.8 9.75 10.25" Rear Differential Service | Fluid Change | BRONCO OBS F150 F250 F350
• Ford Truck 8.8 9.75 10...
_____________________________________________________________________________________________
ARES 70317 - Air Conditioner and Fuel Line Quick Disconnect Tool Set - Includes 7 Popular SAE Standard Sizes for Multiple Applications - Sizes Range from 1/4-Inch to 7/8-Inch
amzn.to/41zaZUC
_______________________________________________
Channellock 440 Tongue and Groove Pliers | 12-Inch Straight Jaw Groove Joint Plier with Comfort Grips | 2.25-Inch Jaw Capacity | Laser Heat-Treated 90° Teeth| Forged High Carbon Steel | Made in USA, Black, Blue, Silver
amzn.to/3H8ldmQ
_____________________________________________
B'laster PB-50 Pro-Grade Multi-Purpose Lubricant - 8-Ounces
amzn.to/43lTvMz
WORKPRO 22-Piece Ratcheting Combination Wrench Set, 72 Teeth, Combo Ratchet Wrenches Set with Organizer Box, Metric 6-18mm & SAE 1/4-3/4"
amzn.to/3LoAi6b
_______________________________________________
Transmission Jack 1660lbs 2 Stage Adjustable Hydraulic Transmission Jack High Lift Telescopic Trans Jacks 32" to 70" Lifting Range
amzn.to/3L0n3Hx
______________________________________________________________________________________________
Video Filmed With:
GoPro HERO9 Black - Waterproof Action Camera with Front LCD and Touch Rear Screens, 5K Ultra HD Video, 20MP Photos, 1080p
amzn.to/3mRg4J3
_____________________________________________________________
Klean-Strip Acetone Strong Fast-Acting Thinning Cleaning Resins Adhesives Heavy Duty Degreaser 100% Pure Low VOC 1 Quart Premium 2 Inch Painter Brush
amzn.to/3Lr1ktW
___________________________________________________________
Wire Wheels for 4 1/2 Angle Grinder, 4&3 Inch Wire Wheel Brush Cup Brush Set, Wire Wheel for Angle Grinder, Angle Grinder Wire Wheel , 5/8 Inch 11 Threaded Arbor - 6 Packs
amzn.to/41AQ2sw
___________________________________________________________________________________________
TOOLSEMPIRE Underhoist Tripod Stand 2 Ton High Lift Jack Stand Reach Under Hoist Stand , Heavy Duty Steel
amzn.to/43XwG2j
________________________________________________________________________________
Milwaukee 2767-20 M18 FUEL High Torque 1/2" Impact Wrench with Friction Ring
amzn.to/3KTbyBG
------------------
MAXXEON MXN00810 WorkStar Cyclops, USB-C Rechargeable LED Inspection Light, Red,
amzn.to/3AlCzcf
---------------
CURT 14001 Class 4 Trailer Hitch, 2-Inch Receiver, Drilling Required, Fits Ford F-Series, Black,
amzn.to/440zFr0
__________________________________________________________
NEIKO 02446A 1/2" Impact Socket Set, 35 Piece, Deep Socket Kit Assortment, Standard SAE (3/8”-1-1/4”) and Metric MM (10-32mm) Sizes, Includes Ratchet Handle and Impact Extension Bars
amzn.to/40yGugc
____________________________________________________
TEKTON 25-Inch Angled Tip Handled Pry Bar with Striking Cap | LSQ42025
amzn.to/40G6arC

Опубликовано:

 

15 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 42   
@BroncosandPartsGarage
@BroncosandPartsGarage 7 месяцев назад
87-96 Ford Bronco/ OBS Ford F-Series Bucket Seat Cushion is on sale for $135 plus ship. Will not fit 40/20/40 (these are in preorder status) I take Venmo, PayPal, Zelle, Cashapp or mail me a check. Email me at n2kpi@yahoo.com for more instructions. Please remember to include your full name, EMAIL and mailing adddess.
@WalterMelons
@WalterMelons Год назад
This honestly could not have been any better of timing. I have to drop my gas tank because it leaks when I fill it up all the way so I’m going to be replacing it with everything you have there.
@BroncosandPartsGarage
@BroncosandPartsGarage Год назад
Hope it helps
@LordKenjii
@LordKenjii Год назад
Great vid, thanks for putting it up and showin the process. Lookin forward to part 2.
@BroncosandPartsGarage
@BroncosandPartsGarage Год назад
Thanks. Parts will be ready to ship Monday. Did you get my email?
@LordKenjii
@LordKenjii Год назад
@@BroncosandPartsGarage I did! I can send the payment ASAP.
@nofinesse7809
@nofinesse7809 Год назад
Been thinking about tackling this project on my rig as well. What do you do with the fuel that gets drained from the tank? In my case, I believe the insides of both the front and rear tanks are corroding, so I don't want to save it in that state. Do people filter it and add it into the replacement tank(s)? Dispose of it? How?
@BroncosandPartsGarage
@BroncosandPartsGarage Год назад
Gas weighs about 6 pounds a gallon. So be careful. We siphon it out and use it in lawn mowers. Or take to recycling centers if it’s ever removed.
@nofinesse7809
@nofinesse7809 Год назад
@@BroncosandPartsGarage that’s helpful - the one difference I suppose in my case is that my truck is diesel. I can just reuse it in my tractor
@jacobdiaz38
@jacobdiaz38 7 месяцев назад
Question! Do you think a hole in the tank would cause a truck to stall out while driving? Or even possibly hesitate tl start or stay idling? Thank you in advance!
@BroncosandPartsGarage
@BroncosandPartsGarage 7 месяцев назад
Yes. When my tank was leaking I could only drive for 10-15 seconds before it would stall. And only run when pedal was on the floor. Made for fun trip at Orv park
@ing2y
@ing2y Год назад
What are your thoughts on metal vs. plastic replacement tanks?
@BroncosandPartsGarage
@BroncosandPartsGarage Год назад
Metal is good for another 25 years. Plastic is great too but pricier. Tough call. I’m making a video using a plastic front tank on this truck too.
@hondamojo1
@hondamojo1 Год назад
Ever tried 50/50 Acetone/Transmission fluid for penetrating oil?
@BroncosandPartsGarage
@BroncosandPartsGarage Год назад
I have not. Sounds ok
@jackjones9460
@jackjones9460 11 месяцев назад
What is OBS? Isn’t your company’s initials but seem relevant if I’m going to understand what your doing. Thank you.
@BroncosandPartsGarage
@BroncosandPartsGarage 11 месяцев назад
OBS- old body style ford
@jackjones9460
@jackjones9460 11 месяцев назад
@@BroncosandPartsGarage Old Body Style! Thank you! I never would’ve guessed!
@michaellynch179
@michaellynch179 2 месяца назад
I have been looking for a way to do drop my tank without taking off the bed. I live in the rust belt and my bed is probably rusted solid to the frame at this point. I plan on capping off the fuel lines for the time being since my rear tank developed a pretty decent leak and I only drive my truck in town.
@BroncosandPartsGarage
@BroncosandPartsGarage 2 месяца назад
This will work and allow you to assess morer damage under the truck. tanks are pretty cheap. Jeffs Bronco Graveyard sells them
@timhouts6312
@timhouts6312 Год назад
Good stuff be looking for part 2 will you be at the swap meet May 6.
@BroncosandPartsGarage
@BroncosandPartsGarage Год назад
My sons graduating from college that day.
@BroncosandPartsGarage
@BroncosandPartsGarage Год назад
How To Remove And Replace OBS Ford F150 F250 F350 Rear Fuel Tank - Installation. Pt2 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-POVVgIUNvSk.html
@BroncosandPartsGarage
@BroncosandPartsGarage Год назад
Don’t forget to watch Part 2, Like, Share and Subscribe!!
@ItsKing32
@ItsKing32 Год назад
does the vent tube lead to anything?
@BroncosandPartsGarage
@BroncosandPartsGarage Год назад
Top of tank
@__Ruggrat
@__Ruggrat Год назад
This is the same procedure for the 92-96 bronco full body style?
@BroncosandPartsGarage
@BroncosandPartsGarage Год назад
Your Bronco will have a steel skid plate supporting the tank and straps on the top like the F-Series. Removing the fuel lines, vent tube and sending unit will be the same- with the exception of the fuel pump- which is in your Bronco tank. We have a bronco exclusive "tank" video coming out in a few weeks. Thanks for watching!
@JakeTheCryptoSnek
@JakeTheCryptoSnek Год назад
This was really detailed and awesome but why not just remove the bed with the lift? It would've been way easier.
@BroncosandPartsGarage
@BroncosandPartsGarage Год назад
We wanted to make it more an “everyman’s” most don’t have lists. Plus the filler tubes and bed bolts- on most fords in Midwest don’t come out easy.
@JakeTheCryptoSnek
@JakeTheCryptoSnek Год назад
@Broncos and Parts Garage that's definitely understandable! Awesome video regardless!
@RageUnchained
@RageUnchained Год назад
My vent valve on my single cab short box has two outlets and two hoses and I can’t find a replacement anywhere
@BroncosandPartsGarage
@BroncosandPartsGarage Год назад
One should be fine?!
@RageUnchained
@RageUnchained Год назад
@@BroncosandPartsGarage after research I learned one Vents to atmosphere, so I bought one for the 302 and capped the one that goes to the bumper
@CR500R
@CR500R 11 месяцев назад
We desperately need someone to "OBS solutions" us a ready-made in tank pump for those of us who want to do the 38 gallon rear tank conversion.
@BroncosandPartsGarage
@BroncosandPartsGarage 11 месяцев назад
Tanks are already 33 gal. Get larger tank, bend down float?!
@CR500R
@CR500R 11 месяцев назад
@BroncosandPartsGarage The rear tank on the Bronco is 33 gallons, but not the F-Series. The trucks have a 19 gallon aft axle tank. (Otherwise the "38 gallon mod" would not be a thing to do to these trucks. See forums, and Several RU-vid videos) you can not retrofit the Bronco in-tank pump to work for the truck, because (most all) the trucks have a dual tank system, and the pumps have a different design. 😉 Trust me my man, I would have done this a decades ago on most if not all of the 10+ OBS F-Series trucks I've owned if it were simple. I just don't care for the ghetto pump modifications people have to do for gas powered F-Series when they do the "38 gallon mod." Hence my comment.
@ItsKing32
@ItsKing32 Год назад
they make a tool for exhaust hangers
@BroncosandPartsGarage
@BroncosandPartsGarage Год назад
Didn’t know. But we got em off pretty easy. Saved $$
@ToyManFlyer1100
@ToyManFlyer1100 Год назад
🙄🙄🙄...In ALL the vids I've watched, NOBODY said ANYTHANG 'bout taking the Exhaust hangar off...NOBODY!!!...Sooo, just like the dang 5.0 liter Fuel Pressure regulator, I would've been there all freeking DAY tryna figure out how to take this stupid tank out... AND....I have to work on the side of the road coz my stupid Apartment complex don't allow me to work on my truck in the parking lot....
@BroncosandPartsGarage
@BroncosandPartsGarage Год назад
Glad it helped!!
@ToyManFlyer1100
@ToyManFlyer1100 Год назад
@@BroncosandPartsGarage You're welcome, sir...👍👍😊😊
Далее
How to Replace Rear Fuel Tank 1992-1996 Ford F-150
22:28