How to Replace Rear Strut and Spring Assembly 2009-2020 Dodge Journey

Подписаться 514 тыс.

Просмотров 56 тыс.

50% 1

Buy Now!
New Strut & Spring Assembly from 1AAuto.com 1aau.to/ia/1AST...
This video shows you how to install new reliable TRQ struts in your 2009-2020 Dodge Journey. TRQ Struts are made to fit your vehicle exactly, just like the original part. Struts can wear out as early as 50,000 miles. You should inspect them regularly for leaks or wear. Save time, money, and hassle by replacing an entire strut assembly.
This process should be similar on the following vehicles:
2009 Dodge Journey
2010 Dodge Journey
2011 Dodge Journey
2012 Dodge Journey
2013 Dodge Journey
2014 Dodge Journey
2015 Dodge Journey
2016 Dodge Journey
2017 Dodge Journey
2018 Dodge Journey
2019 Dodge Journey
2020 Dodge Journey
Tools you will need:
• Impact Screwdriver 1aau.to/oa/1AXA...
• Phillips Head Screwdriver 1aau.to/oa/1AXA...
• Pocket Screwdriver
• Pry Bar 1aau.to/oa/1AXA...
• 18mm Wrench
• 10mm Socket 1aau.to/oa/1AXA...
• 15mm Socket 1aau.to/oa/1AXA...
• 18mm Socket 1aau.to/oa/1AXA...
• 19mm Socket 1aau.to/oa/1AXA...
• Trim Tool Set 1aau.to/oa/1AXX...
• T25 Driver 1aau.to/oa/1AXA...
• T50 Socket 1aau.to/oa/1AXA...
• Torque Wrench 1aau.to/oa/1AXA...
• Block of Wood
• Liquid Thread Locker
• Floor Jack 1aau.to/oa/1AXA...
• Hammer 1aau.to/oa/1AXA...
• Small Hook
Subscribe: / @trq
Check out our playlist:
Dodge Journey 2009-2020 1st Generation: • Dodge Journey 2009-202...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Опубликовано:

11 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 45

@TRQ 2 года назад

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

@mmr1412 2 года назад

Dodge should be ashamed to require all this disassembly to reach strut and spring... Never a Dodge again!

@calimann83 2 года назад

right, had a 2011 Dodge Charger. you have to completely remove the front bumper and a bunch of paneling just to replace the headlights.

@SDPP992 2 года назад

Well than be disappointed in any vehicle that has rear struts, GM is even worse

@nathangray1003 2 года назад

Tutorial videos don't get any better then this. Thank you.

@bammerbiff1621 5 месяцев назад

After watching this video I have two thoughts: 1) I can do this. 2) I don't want to do this.

@mikeeternal777 Год назад

This is one of the best repair videos I've seen 👏 Nice job.

@benjaminabel8596 Год назад

I'm just gonna cut a hole in the panel cause it'll be covered up by the seat anyway...

@daveevans2527 2 года назад

Fantastic video! Did the job myself. Only variation is on 12 year old 2010, sway bar bolt impossible to loosen. Two corroded. Noticed in the video his sway bar linkages were new.... No corrosion. But if you do both sides at the same time, once you have removed the top nuts on both struts, the sway bar, with a little prying, will rotate enough the old struts can be removed, and new set in place.

@GeorgeDugan-gx2xe 3 месяца назад

Thank you for the awesome video! I really like all the details! This was very informative! Keep them coming! Great job!

@TRQ 3 месяца назад

+@GeorgeDugan-gx2xe Thanks for watching our video! 1aau.to/m/Shop-TRQ

@Relevantminded Год назад

It'd be great to see a video on the 2013 dodge journey sxt 3.6l without the third row seat.

@deansavard2728 Год назад

Why didn't they put in access panels to remove the nuts

@abelsarinana727 Год назад

Because everything is a damn Journey with this car...

@stevejeremy8028 Год назад

I WILL NEVER BUY ANOTHER DODGE PRODUCT EVER AGAIN !!!!!!! THIS IS BEYOND STUPID !!!!!

@kingdavid2541 3 месяца назад

Good work.. Nice and detailed

@knucklesmf3280 Год назад

This is absolutely disgusting. I'm so glad I got out of automotive and into heavy equipment.

@orestdmytryshyn247 2 месяца назад

Just did this recently. It actually is not that hard after you start. You can do without removing sway bar link. Just use couple small bottle jacks to maneuver shock and arm where you want it. I say do it yourself because you will clean all things under those panels - it collects horrific amount of dust. Pros chase $ they do not have time to clean all those crevices. This all is very doable in a day of slow work on a weekend. If you have air tools and car lift helps big time. Torque wrench a must here.

@Kirby1969 2 года назад

your walk thru videos are awesome, thank you!!!

@montsholong1459 Год назад

I like the way the torque wrench is used to ensure those lower suspension bolts are gudntite!

@betsydonato6817 Месяц назад

3:37 - This far into the video,,,you have got to be kidding me. Why not make a compartment access to those mounts, rather than removing and rebuilding the entire interior ? - The Dealer needs to include not only a 3 day survival kit, but a tool box complete classroom in these death traps.

@blackroomghofficial1097 Год назад

8 days later….

@jonungles3848 2 года назад

Awesome instructions,,and all that for 4 nuts....wow

@randyabstract4358 2 месяца назад

Is the left rear strut the same as the right rear strut?

@stoneysdead2000 5 месяцев назад

Just got a quote for 755 bucks for this job.Sounds about right for all u gotta do geez....

@ImadeItTillMidnight 5 месяцев назад

Rotor is on backwards.

@is-nv1lu Год назад

On your video replacing the front struts on this same vehicle you removed the axle nuts but didn’t on this video for the rear struts. Is there a reason why you would need to remove them for the rear?