Тёмный

How to Replace Rear Wheel Bearing & Hub 06-17 Toyota RAV4 

Просмотров 123 тыс.
% 1 050

Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com 1aau.to/ia/1ASHS00903
1A Auto shows you how to repair, install, fix, change or replace a worn out, vibrating or groaning wheel bearing hub. This video is applicable to the 05, 06, 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, Toyota Rav4.
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oy2/1AXAA00013
• Pry Bar 1aau.to/obW/1AXAA00020
• 14mm Wrench 1aau.to/oeC/1AXAA00010
• 10mm Socket 1aau.to/oq4/1AXAA00017
• 14mm Socket 1aau.to/otW/1AXAA00015
• 17mm Socket 1aau.to/otW/1AXAA00015
• 30mm 12-Point Socket 1aau.to/od/1AAST00002
• Brake Caliper Compressor Tool. Quad Piston. Ratchet Style. 1aau.to/ob/1AXAA00278
• Brake Caliper Hanger 1aau.to/oj/1AXAA00084
• Slide Hammer
• Pliers
• 1/2 Inch Breaker Bar 1aau.to/ocZ/1AXAA00078
• A Piece of Pipe (for leverage)
• Ratchet 1aau.to/oyZ/1AXAA00016
• Socket Extensions 1aau.to/otW/1AXAA00015
• Torque Wrench 1aau.to/ohj/1AXAA00044
• Brake Grease
• Brake Parts Cleaner
• Cloth Rags 1aau.to/ock/1AXSS00035
• Rust Penetrant
• Center Punch 1aau.to/oan/1AXAA00055
• Hammer 1aau.to/odm/1AXAA00091
• Wire Brush 1aau.to/oaX/1AXAA00079
For More Info visit us at 1aau.to/h/bSb/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Авто/Мото

Опубликовано:

 

23 сен 2019

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 70   
@1AAuto
@1AAuto 4 года назад
√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*
@teddymac3737
@teddymac3737 3 года назад
Here is a good trick for keeping the rotor from seizing to the wheel bearing. On the backside of the rotor (old or new) between the lug holes brush on some anti-seize. Do the same between the lugs on the wheel bearing. I also apply anti-seize to the front of the rotor between the lug holes and the backside of the tire rim between the lug holes. Both anti-seize technique prevents the opposing surface from adhering to each other. No more banging on the tire to loosen it from the rotor and no more hammering, putting in screws or placing a pulley on the rotor to remove it from the wheel bearing. I have been doing this for years with great success.
@1AAuto
@1AAuto 3 года назад
+teddymac Thanks for the tip!
@captainswb
@captainswb 2 года назад
Class act great mechanic impressive to watch, I was a mechanic for 45 years and appreciate watching a good mechanic work
@billmacdonald9056
@billmacdonald9056 Год назад
Great video. Thanks. 2 things: 1. For me, Using a punch to free the crimped axle nut just resulted in that distorted part mangling the threads of the axle as i took it off. I was more careful on the other axle, but still stripped the threads from that hangnail on the nut. 2. To free the hub I just put a punch through the 14mm bolt holes from the backside and took turns smacking the punch against the lug stud plate. It broke loose pretty quickly.
@ozarkliving7263
@ozarkliving7263 20 дней назад
Excellent video!
@blondiethebuilder5676
@blondiethebuilder5676 3 года назад
You guys have the best how to videos around. The step by step and instructions are fantastic. Thanks for the video
@1AAuto
@1AAuto 3 года назад
+Blondie The Builder Thanks for checking us out!
@kevinfreeman6231
@kevinfreeman6231 2 месяца назад
Great video, very helpful and straightforward. I had to use a puller to get the hub off of the spindle though. Between the road salt up north and the salty air down here in SoFlo, this truck has lived a hard life.
@juansolis9409
@juansolis9409 5 лет назад
you are amazing , you can easily be a Teacher its really easy to understand the way you explain it, thank you very much.
@ozarkliving7263
@ozarkliving7263 20 дней назад
Did you utilize OEM bearings? If not, is there an aftermarket I can trust to be as good or better than genuine Toyota? 2011 Venza AWD. Also, love to know the brand/model of that slam hammer. Thanks
@Alex-gn9wd
@Alex-gn9wd 4 года назад
If you ever need another RAV4 to work on and make awesome videos I'll be happy to drive to you
@kdoran709
@kdoran709 2 года назад
I gotta laugh at the condition of this one. Absolutely perfect and flawless bolt removal every time. Try doing this on a 10-15 year old car in the North Atlantic!
@ericsanoe3206
@ericsanoe3206 9 месяцев назад
Nice video I think I can look at this video and change mine thanks for the video!!!!💯
@billkats5432
@billkats5432 Год назад
An excellent presentation on the works performed. Thank You😊
@ozarkliving7263
@ozarkliving7263 20 дней назад
I have yet to find a non-OEM rotor that didn’t warp very quickly vs Toyota OEM that seem to last for many years, warp free. Can you comment on close to OEM or better rotor brand(s)?
@davidlovisa7150
@davidlovisa7150 4 года назад
Wow....amazing video. Great detail and explanation!!! Made the job so easy.
@1AAuto
@1AAuto 4 года назад
+David Lovisa Thanks for the feedback and for watching!
@apagan65
@apagan65 3 года назад
Great video! Excellent detailed work👍
@nashad2
@nashad2 Год назад
What’s the size of the threads on the bolt you used to get the rotor off?
@lilcal043
@lilcal043 2 года назад
Excellent… great how to visit. Thanks a million!
@lahcenbenyahya511
@lahcenbenyahya511 3 года назад
Very professional work excellent job i lake the way you work tyvm
@tiotheberk
@tiotheberk 3 года назад
Great video, however I can not get on those 14mm bolts on the back side. Maybe my sockets are fat or something but there is not enough room back there to let the socket seat on the bolt head. This is why I looked up a video, of course he just puts his socket on no prob... ugh!!! Thanks tho, the bolt in the rotor was a nice tip!
@reinerzanotelli7358
@reinerzanotelli7358 3 года назад
You had used a screws just for help in remove the first drum, what's the size for this one?
@brianpiersol9412
@brianpiersol9412 Год назад
So what is the noise you might expect to hear when the bearing is going bad please? Thanks, Brian
@mickeymang6
@mickeymang6 Год назад
Thanks for not mentioning the bolt thread pitch to remove the brake rotor
@backcountryamateurradio
@backcountryamateurradio 4 года назад
Very good video. Thank you. I’ll be ordering some stuff from you guys!
@1AAuto
@1AAuto 4 года назад
+backcountry amateur radio Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com
@youeweu
@youeweu 3 года назад
Thanks for the video! I want to replace the CV axle at the same time. Would you have to follow this procedure then do the axle or do the axle first or neither (another way)?
@MegaBait1616
@MegaBait1616 2 года назад
Excellent video.. Lakewood NJ Toyota wants 1K. to do just 1 rear side bearing.... smh.
@cherijohnson2723
@cherijohnson2723 Год назад
4 warning lights came on after this replacement as well as the cruise control now doesnt work. Any ideas? ( ABS, Brake, 4WD and trac lights.)
@michaelkirchhofer3266
@michaelkirchhofer3266 2 года назад
Sorry if this is a dumb question, but Why would you need to replace the hub?
@gregdolecki8530
@gregdolecki8530 Год назад
The hub/bearings are one assembly.
@tahirchoudhary4703
@tahirchoudhary4703 6 месяцев назад
Nice job
@bobc455
@bobc455 11 дней назад
Thanks!
@nukednuked8788
@nukednuked8788 4 года назад
I just watched another vid on the same job and thought nope that's too hard. Watched this vid and think not a problem. Great vid. My Rav is 2014 in Australia, Will it be the same do you think?
@dlmanolo437
@dlmanolo437 3 года назад
how did you know the bearings needed to be replace??....did you hear a particular sound??
@danladd9400
@danladd9400 Год назад
How do you get the wire harness off its clipped on can’t find the release?
@jg11596
@jg11596 8 месяцев назад
how much time does this job take?
@rusty7445
@rusty7445 6 месяцев назад
I like your videos, very knowledgeable, However i noticed in your video you suggested not to get anti seize on your pads and then when you installed the hub your anti seized covered gloves touched the pads anyway... Might be good next time to wipe of thy gloves to prevent contamination.. Otherwise great vid :)
@1AAuto
@1AAuto 6 месяцев назад
+@rusty7445 Thanks for the feedback!
@seancollier
@seancollier 4 года назад
Excellent guide. Thank you.
@1AAuto
@1AAuto 4 года назад
+Sean Collier Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
@rockon-wbfqlkjqhsydic72683
@rockon-wbfqlkjqhsydic72683 2 года назад
Great job!!!!!
@TheMooleytuna
@TheMooleytuna 2 года назад
This video is great.. Although... my new one is not going on so easy!?!!?!?
@markbtw7987
@markbtw7987 7 месяцев назад
This is only relevant for 4WD models, rear wheel bearing for the FWD model will be a little different.
@victorjudice7344
@victorjudice7344 Год назад
With a vehicle like this I feel it would be a good idea to change both sides. This is just my opinion.
@kCI251
@kCI251 4 года назад
Is this a 4WD Rav4?
@BarnAgain1
@BarnAgain1 4 года назад
Had to look closely to see the drive shaft, yes 4WD. Mine is only 2WD so I need a different part #.
@1AAuto
@1AAuto 4 года назад
+BarnAgain1 Thanks for checking us out! Yes, this video is specific for the 4WD applications however we do carry the correct bearings for your 2WD application, the part number for these is 1ASHS00954. You can follow this link to find them on the website www.1aauto.com/search?q=1ASHS00954
@Tamrat-B
@Tamrat-B 3 года назад
thank you
@1AAuto
@1AAuto 3 года назад
+Tamrat Shaga Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
@corkyakins9075
@corkyakins9075 2 года назад
159 foot-pounds is for the rear, not the front. It is 216 foot-pounds for the front.
@graylinshowell7051
@graylinshowell7051 3 года назад
Get a slide hammer, even if you rent one. I tried it without and literally half the time was spent trying to get that hub off.
@jss27560
@jss27560 Год назад
Looks relatively easy to do. I'm guessing that if I brought it to a shop they would charge me for 1 hour of labor? 😅😅😅
@victormartinez-tx7ok
@victormartinez-tx7ok 3 года назад
Hi ok thank 2 you
@mickp222
@mickp222 4 года назад
Well done great video. Get yourself some knee pads.
@1AAuto
@1AAuto 4 года назад
+Michael Thanks for the feedback!
@alandust2188
@alandust2188 2 года назад
I had to mute the sound and use closed caption due to the annoying background music. What is the point of the music???
@tunesstreet759
@tunesstreet759 Год назад
There is no axle nut on mine
@beingrealhere9480
@beingrealhere9480 4 года назад
Why was the brake pads and rotors replaced when they looked alright still?!?
@1AAuto
@1AAuto 4 года назад
+Peter Pan Sometimes we video a repair or replacement to show our customers how to do it even if it isn't necessary in that specific vehicle at the time. Thanks for watching.
@gabegates6463
@gabegates6463 Год назад
Sensor broke, sick. I love the rust belt, man what the hell🤬
@williamzinser6108
@williamzinser6108 2 года назад
It was a good video but it looked like front bearings to me
@TigerKittay
@TigerKittay 3 года назад
A lot easier than the front bearings.
@1AAuto
@1AAuto 3 года назад
+TigerKitty 2 Thanks for the feedback!
@martinramos6321
@martinramos6321 2 года назад
Doing it to my ruv 4 tomorrow ; the cheapest place I found's charging 1300.00 for both rear ones 😳
@gavinbeaty6825
@gavinbeaty6825 Год назад
I was like #666