How to Replace Serpentine Belt Tensioner 2004-2009 Dodge Durango 

Buy Now!
New Serpentine Belt Tensioner from 1AAuto.com 1aau.to/id/1AEB...
The tensioner is a springed device that keeps the serpentine belt in your vehicle at the correct tension to keep it on the pulleys, without being so tight that it breaks. Eventually the tensioner may become worn, loose, or stuck, resulting in belts that squeak, slip, or fall off. This video shows you how to install a new TRQ tensioner pulley in your 2004-2009 Dodge Durango.
This process should be similar on the following vehicles:
2004 Dodge Durango
2005 Dodge Durango
2006 Dodge Durango
2007 Dodge Durango
2008 Dodge Durango
2009 Dodge Durango
Tools you will need:
• 13mm Wrench 1aau.to/oa/1AXA...
• 10mm Socket 1aau.to/oa/1AXA...
• 13mm Socket 1aau.to/oa/1AXA...
• 15mm Socket 1aau.to/oa/1AXA...
• 8mm Deep Socket
• 8mm Socket 1aau.to/oa/1AXA...
• 3/8 Inch Drive Ratchet 1aau.to/oa/1AXA...
• Gloves 1aau.to/oa/1AXS...
• Safety Glasses 1aau.to/oa/1AXA...
Subscribe: / @trq
Check out our playlist:
Dodge Durango 2004-2009: • Dodge Durango 2004-2009
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.