How to Replace Starter 2002-2005 Ford Explorer

Подписаться 519 тыс.

Просмотров 75 тыс.

50% 1

Buy Now!
New Starter from 1AAuto.com 1aau.to/ic/1AES...
This video shows you how to install a starter on your 2002-2005 Ford Explorer. The starter is a powerful electric motor that gets your engine to turn over when you turn the key in the ignition switch. If a motor has worn out or become damaged, your vehicle won’t start.
This process should be similar on the following vehicles:
2002 Ford Explorer
2003 Ford Explorer
2004 Ford Explorer
2005 Ford Explorer
Tools you will need:
• 13mm Wrench 1aau.to/oa/1AXA...
• 10mm Socket 1aau.to/oa/1AXA...
• 13mm Socket 1aau.to/oa/1AXA...
• 19mm Socket 1aau.to/oa/1AXA...
• Ratchet 1aau.to/oa/1AXA...
• Torque Wrench 1aau.to/oa/1AXA...
• Sandpaper
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Опубликовано:

18 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 25

@TRQ 2 года назад

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

@mikepaulski1108 Год назад

Shalom Aleichem. As a retired mechanic on disability I always like to check these sites out for any changes in R&R procedures. This is straight up and no problem. Tech tip, always wire brush the thread's on the bolts and anti-seize them. Also after cleaning the wire ends I like to add some dialectic grease to cut down on corrosion. Same on battery post's. Good video. Ratson haba b'shem YaHuah

@bulletman124XXL Год назад

Wow, excellent video, no wasted time just perfect explanation and visual of this job. Thank you!

@NightH4wk76 Год назад

Less than 6 minutes! Amazing

@luisbernal7086 Год назад

Good viewing from camera and good instructions 👍

@Believe_the_Bible 2 года назад

Good instructions once you got to the starter but you never showed how and where you get to this very difficult to access part.

@jimxiong3815 Год назад

This a v6? Or v8? Is it the same process ?

@getwiththapaint3567 2 года назад

Many thanks friend

@danielmader9804 4 месяца назад

You are awesome and thank you for showing me that I appreciate your video thank you

@randythomas90 10 месяцев назад

My mounting bolts are on too tight I can't get the off any ideas I dont have impact tools

@mikepaulski1108 Год назад

Shalom Aleichem. I'm a retired mechanic on disability an I've always removed the positive wire from the battery not the negative when replacing any electrical component because if I touch any negative surface with a positive wire from any component it'd short out! So disconnecting a positive wire from the battery makes more sense in my opinion. Ratson haba b'shem YaHuah

@TRQ Год назад

+Mike Paulski Thanks for the feedback! 1aau.to/m/Shop-TRQ

@christopher-xi2ey 5 месяцев назад

Im not a mechanic but poorer I get the more i learn lol, I have a loose connection in the wiring starter is good, can I replace just the wires?

@RickyHoward-wu3qh 3 месяца назад

I don’t know what year that is but you are not getting to those wires from the top on my explorer!!! They are buried!!! You can’t even see the starter unless you crawl up under there.

@joshthefam1659 3 месяца назад

My mechanic says that you disconnect the positive of the battery not the negative because you'll get sparks

@eddiecampbell1506 Месяц назад

Just so every one knows I have the 02 explorer xlt 4.6 this video is wrong there's 3 bolts on the starter,I actually ended up breaking the old starter thinking there was only 2 bolts

@elmatatang7660 Год назад

Dang atleast show were it’s at

@JamesClark-x1s 7 месяцев назад

Where does the ground wire go

@RickyHoward-wu3qh 3 месяца назад

Let me tell ya folks this is nothing like what he’s doing!!!! It’s not even close to that easy!!! That has to be a 1970 model with nothing under the hood!!!!😂😂😂😂😂

@CastleHassall 9 месяцев назад

dude you seem to have actually cut off part of the bodywork and taken out the engine to get to the starter.. how on earth do you get to it from above like that? bogus fakery going on here

@harrycash8713 9 месяцев назад

V6 or V8?

@TRQ 9 месяцев назад

+@harrycash8713 The part in this vehicle fits either model depending on your vehicle information.

@jerryallen4996 2 года назад

If you want to help tell people the right size. Otherwise you fall into a scam. End of story.

@jerryallen4996 2 года назад

Idk who you think you or ur brand is but this is clearly a 14mm vs a 13 my dude smh. Just trying to save someone else from the wrong you put me on smh...