How To Replace The Display Bulbs In Your Pontiac Radio

Подписаться 3,7 тыс.

Просмотров 32 тыс.

50% 1

Get Your Bulbs Here..... carradiobulbs....
Have us do it click here.............carradiobulbs....
================================
BELOW IS A LINK TO ALL OF THE PRODUCTS THAT I USE IN THE VIDEO.
Isopropyl Alcohol 99%
amzn.to/37XBA7j
Solder Wick
amzn.to/3wypBp7
Kester Solder
amzn.to/3wrE73h
100 pcs Foam Tip Cleaning Swabs
amzn.to/3PuFuFz
Chipquik Tack Flux/solder paste
amzn.to/3wqcpnr
100 pcs 2.75" Small Head Foam Tip Cleaning Swab Lint Free
amzn.to/3sKnBsC
Stickvise PCB Vise with Standard Nylon Jaws
amzn.to/3a331gF
DC Power Supply Adjustable (30V 10A)
amzn.to/380uQFS
HAKKO desoldering iron
amzn.to/3My1m11
Hakko FX888D-23BY Digital Soldering Station
amzn.to/37Wr3cu
Anti Static Insulation Silicone Soldering Mat Heat Resistant
amzn.to/3PHeL9d
Adjustable Circuit Board Holder
amzn.to/3Mxj8By
In this video I show you how to repair your burnt out display lights in your Pontiac and Toyota radio. Matrix, Grand Prix, Sunfire, Bonneville.I also show you how to repair burned out button lights and where to get high quality bulbs.

Опубликовано:

30 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 50

@juniorcopeland9082 2 года назад

I bought the bulbs from you, but noticed that you didn't reuse the little white bulb base on the 4 bulbs, should they be used or not ? And is there a reason why you use a different radio at the end of the video, I don't understand that ?

@RussellRay 2 года назад

How do you get the radio out?

@Sandhill1988 3 года назад

If I tried this that radio would never work again. You have the touch sir.

@DreamKeeper. Год назад

I bought my orange Prix with half the radio burnt out but just today the whole display went. I also bought it with a few of the button bulbs burnt out. Could I follow the same process and replace the button bulbs?

@VhonYT 3 месяца назад

When replacing this same radio from 06 Grand Prix into my 04 grand am, the new radio has a locked message, is there any solution to this, remove something on motherboard, or some combination on the radio itself?,

@Car-Radio-Bulbs 3 месяца назад

You would have to take it to a dealer and see if they can reprogram it.

@ryans413 4 года назад

You sir are amazing thank you for the detailed step by step. My radio on my Grand Am 2 out of 3 of the bulbs are burnt out other then that the radio and CD player work fine I just wanted to fix the display so I could see it during the day. And a used or new radio is too much money for me this way was much cheaper 30 bucks for three bulbs

@Car-Radio-Bulbs 4 года назад

Holy crap you over paid for bulbs. I have high quality replacements with new caps for only $7.99

@ekmead 5 лет назад

A wire pulled out of one of the green plugs on the circuit board. Can I reattach it with solder?

@ryans413 4 года назад

ekmead Yes just make sure it’s well connected

@GALTwarrior 3 года назад

do you have a source for the buttons themselves? Mine are chipped bad. Could you replace the buttons as well in a repair with the LCD backlights?

@Car-Radio-Bulbs 3 года назад

No I don't have a source for the buttons but we can fix you backlights go here.....carradiobulbs.com/products/delco-radio-display-repair-service-pontiac-radio-1/

@GALTwarrior 3 года назад

@@Car-Radio-Bulbs I sent you an email via your site, haven't heard back yet

@Car-Radio-Bulbs 3 года назад

@@GALTwarrior I have not received any messages from you but I answered you above.

@dougo9229 Год назад

What is the clicking noise your soldering iron makes? Is it shutting off? Can’t say I’ve ever seen that.

@paulrice5766 5 лет назад

i bought the bulbs from you the 4 lights for switches work the display light do not they appear 2 have 3.97 volts any idea

@Car-Radio-Bulbs 5 лет назад

The display lights are 12 volt so I would guess something is soldered wrong or something is touching metal.

@paulrice5766 5 лет назад

thank you

@dothmynugs 11 месяцев назад

I didnt know Alex Jones worked on radios lol

@Car-Radio-Bulbs 10 месяцев назад

It's my night job.

@greenspiraldragon 6 лет назад

how do I know the polarity if I want to install LED bulbs. I would rather have to install them once than twice.

@Car-Radio-Bulbs 6 лет назад

greenspiraldragon I use a volt ohm meter.

@JackReacheround 4 года назад

What LEDs did you end up going with? did it work well?

@TheRedneckAtheist 3 года назад

Can the volume and tuning pots be cleaned In situ? Or do I have to desolder them to get to the back sides?

@janbill79 Год назад

where can a guy buy an 1/8 inch socket / no hardware store has any thing under 3/16, none on ebay either unless I am not typing in the right thing to bring it up

@Car-Radio-Bulbs Год назад

You can get one here carradiobulbs.com/store-4/18-nut-driver/

@ryans413 4 года назад

I also have a question could you replace those bulbs for white LED bulbs then the display last forever

@Car-Radio-Bulbs 4 года назад

No you can not. I tried and they will not work. I was thinking the same thing about them lasting forever but they will not shine through the lens.

@Bdbrad71 4 года назад

Sounds like Darth Vader lol

@jadongeier8948 4 года назад

Having trouble finding any bulbs like that. Can you refer me to where I could find them thanks.

@Car-Radio-Bulbs 4 года назад

You can find them here carradiobulbs.com/products/pontiac-radio-display-bulbs-for-cd-casette/

@hurstmuscle 5 лет назад

My LCD is working but none of the other bulbs light. I don't see any loose connections or wires.

@Car-Radio-Bulbs 5 лет назад

I would look for a blown fuse and check your dimmer switch if you can't find anything it might be time for a new radio.

@brandongreer176 4 года назад

What would happen if I take the insulation off the bulbs will it burn the LCD?

@Car-Radio-Bulbs 4 года назад

Nothing will happen they are filters they take the yellow glow out of the incandescent bulbs.

@jeromejackson3752 3 года назад

Got the bulbs out, but solder is still in the holes. What's the best way to clear them?

@Car-Radio-Bulbs 3 года назад

The best and easiest way is to use solder wick or a desoldering iron .

@STREETRACEN4U 4 года назад

Thanks for this video, half my radio screen stopped lighting up the other day but after watching what it takes to replace the bulbs il just leave it alone lol if it goes out completely il replace the whole radio

@philipjones0630 4 года назад

Just don't make my mistake of getting a replacement OEM. Dealer required to unlock since the radio has a anti-theft control; costs around $300 if I remember right.

@Car-Radio-Bulbs 4 года назад

We can repair it for you for $49.99 and free shipping back to you. Here is a link to the service carradiobulbs.com/products/delco-radio-display-repair-service-pontiac-radio-1/carradiobulbs.com/products/delco-radio-display-repair-service-pontiac-radio-1/

@jakemcdowell4804 4 года назад

audioxpress 1 can you do a 2005 Pontiac bonneville radio?

@Car-Radio-Bulbs 4 года назад

@@jakemcdowell4804 its the same as this one.

@Jlgarner1971 2 года назад

Wen power dropped no code/locked?

@Car-Radio-Bulbs 2 года назад

It shouldn't lock as long as it goes back in the same car it came out of.

@brianwestmoreland3836 5 лет назад

what do you charge?

@Car-Radio-Bulbs 5 лет назад

Hello Here is a link to our services carradiobulbs.com/products/delco-radio-display-repair-service-pontiac-radio/

@yoheff988 4 года назад

Are these bulbs good for a Sony tuner? I already replaced those bulbs few years ago, bought the bulbs at Radio shack for $2, but Radio shack are not here anymore. Could you replace the bulbs with LEDs? if the answer is yes what should I buy?

@Car-Radio-Bulbs 4 года назад

I have no idea if these will work in a sony.

@fuckyou96 3 года назад

All the lights went out on my display I have the monsoon cd & tape 2003 grand am radio. The tape part never worked, but after the lights went out the volume knob stopped working. The cd player still works and I use the steering wheel controls. So I ordered a new monsoon replacement and it's locked, which is expected, so I hold down buttons 2&3 and the code doesn't show up like it's supposed to. 😤🙄🙄🙄, Apparently in 2003 they programmed the VIN to the cd player or something and so like many others can retrieve the radio code, I can't. Apparently I need a gm tool . Im at my whits end !!!!

@Car-Radio-Bulbs 3 года назад

You will have to take it to a dealer to have it reprogrammed.