How To Replace the Drive Belt + Tensioner & Idler on a BMW F10 535i N55 | BOND Garage

Подписаться 2,1 тыс.

Просмотров 37 тыс.

50% 1

This video will demonstrate the replacement of the drive belt, tensioner and idler on a BMW F10 535i (N55).
It's been filmed as part of a bigger repair. The other repairs will be added here as released.
🎥 AC Compressor + Condenser Replacement: • How To Replace The AC ...
Tools you need (beside standard tools) + tightening torques:
T50 to remove the idler [60Nm]
T60 to release the tension from the belt
E12 to remove the tensioner [38Nm]
I used this set of parts for my 2013 535i:
www.fcpeuro.com/products/bmw-...
(part numbers are in the listing)
#BMWDIY #DriveBelt #BONDGarage
____________________________________________________________________
Instagram:
@hajo.bond - / hajo.bond
____________________________________________________________________
Music:
Adventures by A Himitsu / a-himitsu
Creative Commons - Attribution 3.0 Unported- CC BY 3.0 Free Download / Stream: bit.ly/2Pj0MtT
Music released by Argofox • A Himitsu - Adventures... Music promoted by Audio Library • Adventures - A Himitsu...

Авто/Мото

Опубликовано:

22 авг 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 41

@maninavette Год назад

All you have to do is, simply remove the air filter box and bracket above it.. for changing the belt . Look at other detailed videos .. again for simple belt change ... remove air box. Easy peazy breezy

@carlosmoreno2387 Год назад

You’re awesome dude thanks 🙏

@BONDGarage 11 месяцев назад

Thank you!!

@Filmsn1080 Месяц назад

man this literally my 3rd time breaking it

@Sonin66 2 года назад

Have the x drive version and needed to change the oil pan gasket. Literally had to take alot of parts off like the pulley and loosen the ac compressor for hidden bolts. Now sometimes when it rains, I get a squeak so I will have to replace the both the idler and secondary pulley

@BONDGarage 2 года назад

Oh boy, I'm glad to not have the xDrive. Makes things apparently a lot easier. But at least you get to put down power from a standstill..

@JatinderSingh-jj5xi Год назад

Nice video

@BONDGarage Год назад

Thank you

@Hvac.tools_ Год назад

I have 2016 bmw x6 N55 engine also, So far replaced the valve cover,could have probably just change the gasket but I did the entire cover, few months later my a/c compressor went. Now I’m hear a little more noise than normal considering replacing the tensor, idle pulley and belt.

@BONDGarage 11 месяцев назад

man I see you're following in my footsteps.. 😂😂 depends on your miles on the car but I did valve cover, OFHG, belt with pulley and idler, all while the compressor was out. all following the ancient saying "while in there..." 😂😂

@Hvac.tools_ 11 месяцев назад

@@BONDGarage lol yeah bro I should’ve done it then, Going place the order for the parts and try do the job myself hopefully it’s a nice little project and doesn’t turn into being a pain in my ass lol.

@morechuckyblood 8 месяцев назад

Thank you for the video ! Very clear to understand and detailed explanation.

@sergiotorres3287 2 года назад

Hello, thank you for the great video. Would you happen to know how many lbs of torque did you use to tighten the tensioner bolt and the idler pulley bolt?

@BONDGarage 2 года назад

i listed the torque specs in the video description in Nm. would use a google converter to calculate them in lb-ft

@mukesht.2876 3 месяца назад

Is "8K1478" also compatible replacement belt for 2011 535I-xDrive?

@powersfamily2501 2 года назад

Excellent video, but where did the bracket and cooler lines blocking the idler pulley magically disappear to, then magically reappear at the end of the job? This is the part I'm at now.

@Sonin66 2 года назад

Crazy enough I was doing this job tonight. It looks like he removed the lines all together and then replaced them. I on the other hand just moved lines out the way and finally got it and bolt to seat. My only problem now is routing this tight ass belt around. I have x drive which means I have a power steering pump to loop around which is honestly seems impossible now. Good luck

@BONDGarage 2 года назад

I removed a bunch of other parts. Fixing multiple things while in there. It's doable with the ac lines in but you have to loosen that one bold that holds them. And even then it's still tight and challenging but possible

@camiloymw 9 месяцев назад

Hey so i have the same engine i noticed that you only replaced one of the idler pulleys. Is replacing the lower idler recommended when doing this as well? I purchased the kit from FCP and it included both idlers tensioner and belt

@ericbaxter4195 9 месяцев назад

There are 2 versions of the N55 serpentine belt setup. If your car has the Dynamic Drive (S229A) or Adaptive Drive (S2VAA) options, you have the extra idler pulley (to power those options). Both kits are available at fcp.

@BONDGarage 9 месяцев назад

learned something. thank you!

@factsoverfeelings9228 2 года назад

Can someone anyone refer me to a vid or link that has someone removing the alternator from the f10. Cant find one anywhere ... specifically 535i

@BONDGarage 2 года назад

haven't had the pleasure of replacing mine but seen a couple videos on N55s in 3series. not identical car but same engine. that may be the best starting point.

@JatinderSingh-jj5xi Год назад

Can you tell me what size of key will work to move tensioner because i have to change on serpentine belt

@BONDGarage Год назад

should say in the description. I believe it was a T60

@_Wai_Wai_ 2 месяца назад

Im afraid to disconnect the AC lines to allow access to the idler pulley. Will refrigerant leak when I disconnect those lines?

@BONDGarage Месяц назад

if you just move the lines around no. meaning you disconnect them from any brakes that hold them. but if you open the system then yes, you'll have to recharge it.

@Mydogs0308 3 месяца назад

I got 2011 5353i xdrive My coolant keep kicking in on high Do in know what causing the problem?

@BONDGarage 3 месяца назад

could have a couple of reasons. codes would always be helpful

@deonnestinson7047 2 года назад

Will this work for bmw 535i xdrive ?

@BONDGarage 2 года назад

I don't see why not

@factsoverfeelings9228 2 года назад

hey bond, is there a way to access the alternator bolts without taking off A/C lines ???

@BONDGarage 2 года назад

not sure. usually there is a balance between bending your fingers into pretzels to reach places and making space y removing everything in the way. have you had any luck with it?

@factsoverfeelings9228 2 года назад

@@BONDGarage I had to remove the oil filter housing 🥴, only took a couple minutes. originally I was trying to avoid that.

@b43z48 2 года назад

i replaced the serpentine belt today. belt belt looks good, car runs good. only question is though should the tensioner have any movement?

@BONDGarage 2 года назад

the tensioner arm shouldn't move. Unless you use a tool to release the tension as you did when replacing the belt. If the tensioner arm moves/vibrates while the engine is running it is defective. It should be steady.