How to replace the front brake pads on the Ford Transit Custom (2013 - 2017) Diesel

Подписаться 169 тыс.

Просмотров 62 тыс.

50% 1

Do you need to replace the front brake pads on your 2013 to 2017 Ford Transit Custom van but don't know where to start? This video tutorial shows you step-by-step how to do it!
Our Ford Transit Custom manual covers 62 to 67 reg plates and includes videos for some of the most common jobs, which you can see here in this playlist. Get the full manual here: haynes.com/en-...
What's covered:
Diesel:
Ford Transit Custom 2.0 litre (1996cc) EcoBlue November 2013 - 2017
Ford Transit Custom 2.2 litre (2198cc) Duratorq November 2013 - 2017
Also covers most mechanical features of Tourneo Custom.
Does NOT cover automatic transmission, specialist bodywork/conversions, or technical changes made for 2018 model year (Dec 2017 onward). Does NOT cover Transit Courier or Connect ranges, or new Transit (full size) range introduced for 2014.

Опубликовано:

1 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 19

@highdefp-rm7zg 3 года назад

At 4:00 is says to tighten the nuts but the video shows undoing them...Ooops

@Bigbeer 6 месяцев назад

My custom 2014 is displaying message that i need to change break pads but not saying if its front or back. is there sensor on both axels or just one? thanks

@HaynesManuals 6 месяцев назад

Some have sensors on the front and rear, some only on the front.

@thomasmorrison2431 4 года назад

These videos are awesome. Ive just done my oil filter and oil change. I have now I’ve replaced my fuel filter soni think i can tackle the brake pads maybe the discs as well. These vids are the best

@HaynesManuals 4 года назад

Thanks Thomas, if you need more information on other jobs for the Ford Transit the Manuals available in print or online from haynes.com/en-gb/ford/transit-custom/2013-2017

@euncohen8022 Год назад

Is this the same for 2020 transit custom?

@chrisbow1776 4 года назад

No mention of the brake pad sensor though?. I only mention because I recently had new pads and disks fitted and I not have the brake wear warning message popping up all the time?

@HaynesManuals 4 года назад

Hi Chris, details on the brake wear sensor can be found in the manual. This is available from haynes.com/en-gb/ford/transit-custom/2013-2017

@lardy70s 3 года назад

Thanks for the upload. Can you please confirm if you need to add any copper slip to the back of the pads and the sliders in regards to the transit?.

@HaynesManuals 3 года назад

According to the manual, there's no requirement for any lubrication on the pads. New genuine pads have adhesive pads on the back plates, but there's no harm in applying a thin smear of Ceratec to the back plates where they contact the caliper.

@NFAQ1 Год назад

Where do you put the copper grease?

@HaynesManuals Год назад

On the pad back plates where they contact the piston/caliper, and at the edges of the back plates where they contact the caliper bracket.

@donut4773 4 года назад

No mention of any brake lubrication??

@HaynesManuals 4 года назад

A few manufacturers specifically state that no lubrication should be applied to the pad backing plates.

@IJHougfhton 4 года назад

good vid,grew up studying the manuals in my bedroom as a teenager better than porn for young mechanic

@HappyFukker13 2 года назад

Would be useful if you mention size of bolt

@HaynesManuals 2 года назад

I have a range of spanners in my toolkit, so I just find the one that fits.

@HappyFukker13 2 года назад

@@HaynesManuals ok when car in your workshop but when you are going to sort breakdown job and can’t be asked to carry big toolbox with you is different story So as just useful advice to improve your videos please mention size of bolts

@HaynesManuals 2 года назад

OK, thanks for the comments - we'll bear it in mind!