How To Replace The Power Steering Pump On A Honda Odyssey: A Step-by-step Guide

Подписаться 213 тыс.

Просмотров 99 тыс.

50% 1

Brian Eslick from How to Automotive www.howtoautomotive.com/ takes you step-by-step through the process of replacing the power steering pump on a Honda Odyssey with the 3.5L engine.
Affiliate link mentioned in the video for Genuine Honda (06561-P8F-505RM) Power Steering Pump amzn.to/2HA2VKG
Affiliate link mentioned in the video for Genuine Honda Fluid 08206-9002 Power Steering Fluid - 12 oz. amzn.to/2ELDHLS
Affiliate link mentioned in the video for How to Automotive Tool Store www.amazon.com/shop/howtoauto...
Website
For more videos, tips, and to purchase recommended tools and products visit my website at: www.howtoautomotive.com/
Stay connected at:
Email: howtoautomotive@gmail.com
Facebook: / how-to-autom. .
Google+: plus.google.com/+HowtoAutomot...
LinkedIn: / brian-esl. .
Disclaimer
Owing to factors beyond the control of How to Automotive/Brian Eslick, it cannot guarantee against unauthorized modification of this information, or improper use of this information. How to Automotive/Brian Eslick assumes no liability for property damage or injury incurred as a result of any information contained in this video. How to Automotive/Brian Eslick recommends safe practice when working with power tools, automotive lifts, lifting tools, jacks and jack stands, electrical equipment, blunt instruments, chemical lubricants, or any other tools or equipment seen or implied in this video. Because of factors beyond the control of How to Automotive/Brian Eslick, no information contained in this video shall express or imply warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or information contained in this video is the sole responsibility of the user and not How to Automotive/Brain Eslick #HowtoAutomotive

Авто/Мото

Опубликовано:

21 фев 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 84

@simplelangperorock 8 месяцев назад

Brian is simply one of the bests here in RU-vid. Experienced. Understand what he is saying. No camera man and uses one hand while working. Crack/disassembly the car parts loose, no-cut for all to see. No 2nd guessing and on-point.

@micheledillon8967 Месяц назад

Thank you for posting I'm not a mechanic but I feel empowered

@fotomedia1 4 года назад

No need to empty the reservoir fluid. As long as the hose remains higher than the reservoir itself the fluid will not pour out.

@georgetsetsekos1988 3 года назад

Outstanding video; excellent presentation with clarity and simplicity

@ableseeker1781 5 лет назад

Thanks. Really good job of explaining the tough parts and how it all goes together. I don't know how you conveyed that much information in that little amount of time but you must be pretty good at film editing and communicating.

@2bisc 9 месяцев назад

Thank you for your video. If you remove the huge black plastic cover on top of the engine, there'd be a gap big enough to slide a thin, long flathead screwdriver down to hold the end of the bottom bolt (of the pump) from moving, then you can put the new pump in and tighten the nut. Also, I think if you leave the wheels at left or right turn position instead of straight ahead position, the fluid would go down to the rack and pinion easier. I replaced the pump (wheels at straight posion), when I turned on the engine, the fluid level wouln't go down, hard to turn the steering wheel for a few seconds.

@captainshrimppuertorico4148 2 года назад

Thank you for the video very informative made it look super easy.

@CarlosAguilar-dj4ph 3 года назад

Great video!!! Thanks for the upload

@feeshmanudan7273 9 месяцев назад

Wow detailed great information 👍🏽

@ramtrucks721 6 лет назад

Once again... U make it look easy... Good job

@HowtoAutomotive 6 лет назад

HEMI LOVER thank you!

@uriel-heavensguardian8949 4 месяца назад

Thank you for this

@robertsherrick4081 2 года назад

Thanks, gonna have to do this soon. A short peice of tubing slit lengthwise will tame that adjuster.

@dee1062 2 года назад

Excellent video

@kkibler1 4 года назад

Thank you. Your video was spot on. Much appreciated.

@rodneysmith247 3 года назад

That's right on not spot on 😀

@darkwarrior2383 3 года назад

Excellent video. Thanks for the help!!!

@HowtoAutomotive 3 года назад

Thank you for watching!

@akeemhoque5976 3 месяца назад

Thank you

@Isuzu81 2 года назад

Thank you.

@thewayjesuschristislord3700 2 года назад

Great video excellent content keep it up the good work 👌👌👌👌

@HowtoAutomotive 2 года назад

Thank you! I will.

@heyitschinoable 3 года назад

Thats a pretty damn clean engine bay car looks well taken care of

@sleesanders6064 4 года назад

Good video. Bout to do one this morning. Might even try doing it one handed holding my phone😜. All kidding aside thanks for the vid.

@CRAPO2011 3 года назад

Great vid, my ps pump likes to whine and it intermittently leaks. Will probably have to replace those oem honda pumps dont come cheap.

@MrRangerZr1 6 лет назад

Brain I got a question. Can a leaky PS pump cause the timing belt to skip or fly off due to the oil on the camgears and the belt itself?

@philiphazlewood3450 Год назад

Your the best. And you don't take all day. Tks

@HowtoAutomotive Год назад

Thank you!

@timwilliams1217 5 лет назад

thanks for the video. hopefully I didn't screw up.

@vickyvanvliet 4 года назад

Great Video,where is the link for purchasing the parts?

@uttamdutta1762 2 года назад

Thanks.

@willg.5168 4 года назад

Excellent vid, but I'm hoping it's a pump issue and NOT the rack/pinion. Fluid spat out of the reservoir after the cap popped off, from what seemed like the pressure "build up". I replaced the reservoir and same thing happened. Golly, why'd this have to happen this time of yr here in western NY?😒😣

@joshua.sanchez9689 2 года назад

Nice 👍 well done 👍

@HowtoAutomotive 2 года назад

Thank you!

@McAdamsMechanics 10 месяцев назад

Did you replace that o ring in the high pressure?

@gr2262 3 месяца назад

My pressure line that goes on top of the pump has a had vibration at touch, and the pump makes a slight noise at idle after replacing the return hose, belts and tensioner. I made sure to bleed it but still makes noise. Could the belt be on too tight or pump going bad?

@joeyrottweilas7153 3 года назад

Thanks !!! 👌

@HowtoAutomotive 3 года назад

Joey Rottweilas Thank you for watching!

@fotomedia1 5 лет назад

Good Vid.

@HowtoAutomotive 5 лет назад

Thank you. Did everything go smooth for you?

@AA-zm4ow 4 года назад

some lost a bolt on its a m14 size and you can use Honda wheel rim bolts are the same size, just in case

@robertc.6441 11 месяцев назад

Hey there, my power steering fluid leak started getting gradually worse since I bought this old reliable Odyssey van, now there is a obvious leak up top under the hood but I can't really tell where the leak is? What a mess! For now I am just going without power steering til I get it figured out. I am a DIY 'er due to funds, do you think most likely my leak is around the pump and reservoir, or maybe a leak underneath? I know it hard to tell without looking at it in person, but I can't afford to take it to a mechanic, it's my only vehicle, I am not really sure where to start without just throwing parts into it! I have some Honda fluid on the way from Amazon, what do you think i should do? Other than this power steering issue and chipping paint it's a very good van! Let me know? Thanks! My van is a 2003

@journeywithjay3197 Год назад

Is it a problem at all to drip fluid on the pully belt?

@way2golf496 6 месяцев назад

What year honda odyssey was presented in this video?

@rodneysmith247 3 года назад

When the pump starts to wear out does it make a grinding bad bearing sound like a bad idler pulley bearing? Great video 👍

@timault8209 Год назад

Yes.

@shrimptunes3463 Год назад

Great instructive video! One question: After installing a new pump, reservoir and connecting hose, I filled up with fluid and ran the van a minute, then turned the wheels a bit (maybe not enough-didn’t go lock to lock). Hopped in and drove around the driveway, into the street, turned around and came back. Popped the hood and discovered the cap had blown off the reservoir and fluid lost. Any thoughts? I refilled and tried it again. Just from the shop to the garage (100 ft). Everything held up okay. I’m perplexed!

@McAdamsMechanics 10 месяцев назад

So the system works on pressure, right? And fluid heats and expands. May have been too much air in the deeper parts of the van and expanded. Once it was out only fluid remained 👍

@calibella1597 4 года назад

Question for you my friend, the high pressure line doesn't have a seal gasket when you put it back? my honda odyssey 04 is leaking from there, thank you.

@privateinformation9384 3 года назад

The new pump from Honda should include the new seals

@TrikeSquadron 5 лет назад

My local Honda Dealer wanted to "refurbish" my pump (replace seals or gaskets I guess? in my power steering pump) or replace it. They did a refurbish of my seal just 3 years ago! They sya it is not "leaking" and not making any noise like a problem, but noticed some "seepage" at the gaskets and one of the hoses (which they also wanted to replace) for a total price of over $900. I thought that sounded pretty fishy to me. They said the "seepage" was only noticeable because of dirt accumulating on the gaskets and hose areas. Is this just a con to get my to replace something that does not need doing?

@rjferry7805 5 лет назад

$900...don't forget that includes free coffee and cookies in the waiting room! And cable TV!

@fotomedia1 4 года назад

I had to keep topping off my PS fluid and discovered it was leaking through the rack on my 2004' Ody. Tried a bottle of Lucas PS stop leak, unfortunately it didn't fully stop the leak but it did slow down the leak enough to save myself $700 for a rack replacement. After putting in the Lucas my PS pump started to whine, I guess the viscosity changed enough to cause the PS to make noise. Honda is very particular with their fluids so I an not sure I would recommend any stop leak of any kind for Honda's. I changed the O-ring on the inlet of the pump and used the Honda PS fluid, the noise went away.

@cumshot247 Год назад

But is the leak still there?

@hannibalgenial7938 5 лет назад

Do you have a video for the same odyssey 2002 but just the power steering belt need to be change. How can I do it.

@rodneysmith247 3 года назад

Hey Brian does it start to make noise as a symptom like a bad bearing without turning the wheel when it running? Guess I'll listen the belt and spin all the pulleys to see where the noise is coming from. Great video 👍

@HowtoAutomotive 3 года назад

I feel on a couple ways one that will leak and the other is they can make a whining or groaning noise.

@Wheelmankd 5 месяцев назад

I’m having the same problem was it the pump

@stevejohanson4133 2 года назад

Question: My 2001 Honda Odyssey steering wheel was becoming stiff to turn and now I have no power steering. There was no unusual sound comming from the pump but the engine would struggle upon a cold start and shake and now since there is no power steering the engine cold starts perfectly and is running smoth . Also, there are no leaks and the fluid is reading full on the power steering reservoir. Question: what is the problem and what needs replacement. Bad Power Steering Pump ? Clogged rack and pinion ? Bad Pressure Switch ? Clogged line ? Any help would be appreciated 👍

@tylerjunior7660 2 года назад

Rack and pinion replacement

@Mr_Wicked 5 лет назад

Now my steering wheel needs full arm strength just tplo turn the wheel. All belts are fine so after i install this pump I should be good?

@HowtoAutomotive 5 лет назад

Mr. Wicked sounds like the pump has stopped working.

@Mr_Wicked 5 лет назад

@@HowtoAutomotive idk I just bought a new one hopefully that works I was just curious in case it might be something else.

@HowtoAutomotive 5 лет назад

Mr. Wicked 99% of the time it’s the park. The only other thing it could be is a rack and pinion.

@Mr_Wicked 5 лет назад

@@HowtoAutomotive yup found the problem small drop leak in pressure line

@toddv7257 Год назад

I should have tried doing this myself. Took my vehicle to my local shop, where I had been going for years. Picked up the part first, so was hoping to save some money and just pay for labor. They wanted $385 to put it in. $109 for a flush, then labor at $160/hr. Is this how much things cost these days ? It's the last time I ever visit that shop again, ridiculous !!!

@Usmanthemecano 6 лет назад

Not a bad job at all! When this happens does the customer pay the difference on the new part?

@meverhart6815 6 лет назад

Is a gasket of any sort required?

@carlosybarra3099 3 года назад

I have a 1998 Honda Odyssey but cant find the power steering pump

@elmecanico4943 Год назад

You have to burp the air out of the system. How do you do that? From what I have seen, when its bubbling in the reservoir it means there's air trapped in the pump ot hoses.

@timault8209 Год назад

The pump will purge the air from the system via the reservoir. Procedure as follows: - Confirm max PS fluid level in reservoir (fill as necessary); remove PS reservoir cap - Idle engine for min. five minutes - Elevate vehicle and slowly turn steering wheel lock to lock; repeat five times. operates

@meverhart6815 6 лет назад

Is a gasket of any sort required?

@HowtoAutomotive 6 лет назад

M EVERHART the new pump comes with all new seals.

@MILANOKIS 2 года назад

Don't really need to suck out the fluid, just leave the hose in the up position. Good video still.

@kangokidkidd4037 6 лет назад

Dang I got a 2005

@kangokidkidd4037 6 лет назад

Mine is leaking like CRAZY

@kowen5323 5 лет назад

I paid someone to replace the leaking top hose. Afterwards, it squealed like a banshee. They claimed it would just take time to bleed out the air. (B.S. - no change after a week) The dealer told me the only thing it could be is a bad pump. (Idiot) I used a turkey baster to remove the fluid from the reservoir. Hardly any spilled. I got the pump out. removed the bottom pipe and noticed there was no resistance. The new o-ring on top was very hard to pull off. This made me suspicious. I tested the spring of the o-ring. It broke into 3 pieces. I figured it was worth a shot, so I put on a new o-ring, put it all back together, and like magic, it works fine with no noise. I'm guessing when they replaced the hose, even though they didn't touch the bottom hose, while the fluid was drained out, the o-ring dried out and became like glass.

@cumshot247 Год назад

How long was the fluid drained out? It takes years for an o-ring to become hard and brittle...🤔

@kowen5323 Год назад

@cumshot247 less than an hour. All I know is, a new O ring was all it needed. It didn't make noise before the hose or after the O ring.