Find the parts used in the video on CarParts.com just there carparts.solutions/CAMRY
⚙️ NEEDED CARPARTS AND PRODUCTS
- Water pump : carparts.solutions/WaterPump_...
- Coolant : carparts.solutions/Coolant_CAMRY
💪 TIGHTENING TORQUES
- Water pumps bolts : 15 Ft-lbs
🛠 TOOLS
The toolbox recommended by CARPARTS.COM to repair your Toyota Camry :
- carparts.solutions/ToolBox
List of the tools we used to replace the water pump on a Toyota Camry :
- Hydraulic jack : carparts.solutions/FloorJack
- Jack stands : carparts.solutions/JackStands
- Fluid collector
- Plastic tube
- 13mm offset wrench
- Ratchet
- 12mm socket
- Big Flat head screwdriver
- Small crowbar
- Hammer
- Paper towel
- Sandpaper
- Compressed air
- Cloth
- Torque wrench :
20 to 250 Ft-lbs carparts.solutions/TorqueWren...
100 to 600 Ft-lbs carparts.solutions/TorqueWren...
Don't forget to subscribe : / @carpartscomofficial
🛻 COMPATIBLE VEHICLES
The operation and tools displayed in the video should be available on the following vehicles :
- 2011 Toyota Camry
- 2012 Toyota Camry
- 2013 Toyota Camry
- 2014 Toyota Camry
- 2015 Toyota Camry
- 2016 Toyota Camry
- 2017 Toyota Camry
📽 🛠 USEFUL VIDEOS 🛠 📽
- How to replace the Battery 2011-2017 Toyota Camry ⚡ : • How to replace the Bat...
- How to jack your Toyota Camry safely : • How to jack your Toyot...
- How to change the Coolant 2011-2017 Toyota Camry ❄️ : • How to change the Cool...
- How to replace the Serpentine belt 2011-2017 Toyota Camry 🛻 : • How to replace the Ser...
⚠️ CARPARTS.COM'S INFOS
- In order to change the water pump, it is necessary to carry out a complete bleed of your cooling system.
- Finish tightening the bolts in staggered order using a torque wrench.
- Everyone's natural reflex is to take the water pump in hand and turn the pump pulley to check that this element is rotating correctly.
But this is a serious mistake that can irreversibly damage the water pump.
You need to immerse the pump in coolant, and to turn it around ten times.
This prevents subsequent leaks, as the pump must never run dry.
🚨 DISCLAIMER
This video is for entertainment purposes only. Carparts.com, Inc. disclaims all damages including, but not limited to, actual, consequential, and/or punitive, for any liability, claim, or any other injury or cause related to or arising from any information or lack thereof posted in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All mechanical car projects entail some risk. It is the sole responsibility of the viewer to assume this risk. If you are in doubt, please consult a licensed mechanic in your area.
📚 CHAPTERS
0:00 Intro
0:10 Disconnect the battery
0:35 How to pull up your Camry
0:56 Bleed the coolant
1:39 Remove the serpentine belt
2:12 Remove the water pump
3:39 Clean the gasket surface
4:27 Prepare the water pump
5:20 Install the new water pump + tightening torques
6:01 Put the components back
6:15 Put your Camry back on the ground
6:51 Add coolant
7:09 Reconnect the battery
1 авг 2024
