Тёмный

How to Replace Upper Control Arm 2000-2006 Chevy Tahoe 

TRQ
Подписаться 477 тыс.
Просмотров 82 тыс.
50% 1

Buy Now!
New Control Arm with Ball Joint from 1AAuto.com 1aau.to/ic/1ASFU00041
Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear. This video shows you how to install a new quality TRQ lower control arm with ball joint in your 2000-2006 Chevy Tahoe.
• Check here for more videos on the 2000-06 Chevy Tahoe • Chevy Tahoe 2000-06 2n...
This process should be similar on the following vehicles:
2000 Chevrolet Tahoe
2001 Chevrolet Tahoe
2002 Chevrolet Tahoe
2003 Chevrolet Tahoe
2004 Chevrolet Tahoe
2005 Chevrolet Tahoe
2006 Chevrolet Tahoe
Tools you will need:
• Pry Bar 1aau.to/oem/1AXAA00020
• 21mm wrench
• 10mm Socket 1aau.to/ont/1AXAA00017
• 18mm Socket 1aau.to/ogX/1AXAA00043
• 22mm Socket 1aau.to/oaS/1AXAA00266
• Trim Tool Set 1aau.to/oeT/1AXXX00006
• Ratchet 1aau.to/orj/1AXAA00016
• Torque Wrench 1aau.to/ojw/1AXAA00044
• 13/16 Inch Wrench
• Gloves 1aau.to/obH/1AXSS00048
• Safety Glasses 1aau.to/oa8/1AXAA00343
• Floor Jack 1aau.to/oeH/1AXAA00068
• Ratchet Strap
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
Chevy Tahoe 2000-06 2nd Generation: • Chevy Tahoe 2000-06 2n...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Авто/Мото

Опубликовано:

 

18 июн 2020

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 39   
@TRQ
@TRQ 3 года назад
√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*
@Fhqwhgads00
@Fhqwhgads00 20 дней назад
I must have watched this like 5 times while changing my upper control arm. Excellent video!
@truthhurts4771
@truthhurts4771 Год назад
Do not forget to install a cotter pin through the ball joint crown nut.
@timclone3757
@timclone3757 Год назад
What if the upper control arm shackles are rusted pretty thin? Is there a replacement part that can be welded in?
@fizzybillylah3816
@fizzybillylah3816 2 года назад
Excellent!
@ericmendoza7629
@ericmendoza7629 2 года назад
How come the control arm you installed has a grease fitting but the ones I ordered from yall dont?
@jaysoncolbert6187
@jaysoncolbert6187 Год назад
It's a conspiracy thing
@angelbenavides5784
@angelbenavides5784 2 года назад
Are the torque specs the same for a 02 suburban 1500?
@user-dx9vd8fg7u
@user-dx9vd8fg7u 3 года назад
Ok I bought these control arms from you guys through 1A auto and that bolt turns it has an Allen wrench fitting on the bottom with no room to get an Allen wrench in on top of the CV boot. This video shows him just tighten it like it’s nothing.
@marcosg6406
@marcosg6406 3 года назад
Might be too late but when it keeps turning just pry down on the control arm so that the ball joint gets stuck in the knuckle as you tighten.
@coffeedollsvp
@coffeedollsvp 3 года назад
Do i need to do this is if i crank my torsion key?
@kingpipiripaus8092
@kingpipiripaus8092 Год назад
If i put my 6 inch lift with the rc control arms they'll fit ??
@GetItGirlEnt
@GetItGirlEnt 3 года назад
What if my bolts want back out of the control arm where the cam screw are
@charlesshepherd7964
@charlesshepherd7964 3 года назад
What if you forgot to set the cams on the upper control arm what do you do then
@Jephro360
@Jephro360 3 года назад
You should get it realigned after that anyway
@kylepowell9829
@kylepowell9829 Год назад
Can you change just the ball joint,or does the complete arm have to be replaced?
@sharpie132
@sharpie132 Год назад
Might as well change the whole thing out the bushings in the control arm go bad also. But to answer your question no you don't have to change the whole control arm out.
@steelersnation4L
@steelersnation4L 3 месяца назад
Question for anyone that may know my truck passenger side tire won’t turn left or right at all but my driver side does the other day I was making a u turn and heard a loud pop.. I just had my pitman arms replaced on both sides any idea what it could be? I have a 03 Chevy Tahoe
@bassassin2695
@bassassin2695 Год назад
Im sooo glad i dont live in the north. I couldn't stand having to beat everything out like that 😂
@troubledsoul764
@troubledsoul764 3 года назад
Do I need adjustable control arm or a non adjustable? 2005 Tahoe Z71 4wd
@vamoneygroup
@vamoneygroup 2 года назад
Get a bent tube control arm. Should be about 200 bucks
@kylepowell9829
@kylepowell9829 2 года назад
Are these ball joints replaceable or do I have to change the whole arm
@misterm77
@misterm77 Год назад
Replaceable. But they ,at leason my Tahoe, are the type where the rubber boot must be pressed on the ball joints(uppers) also.
@nutragardens6632
@nutragardens6632 2 года назад
I did this to my van .. chevy Express and now they say it needs a hole .. So I can get the wheel alignment... I dont understand
@MuhammadAkram-nf2qs
@MuhammadAkram-nf2qs Год назад
nice
@simbyy5486
@simbyy5486 Год назад
Mine rub right under the crow bar at the 5:05 mark
@justindavenport8588
@justindavenport8588 3 года назад
What size bolt for the brake line that broke off? Mine broke as well.
@AFatherToTheFatherless
@AFatherToTheFatherless 2 года назад
Just zip tie it
@net7rok
@net7rok 16 дней назад
You don't show jack placement
@charlesshepherd7964
@charlesshepherd7964 3 года назад
Service tire monitor
@Jephro360
@Jephro360 3 года назад
It might be your tire pressure sensor
@charlesshepherd7964
@charlesshepherd7964 3 года назад
And what is it mean when it says service stabilizing system
@Jephro360
@Jephro360 3 года назад
It might be your auto leveling system
@misterm77
@misterm77 Год назад
Usually electronic struts
@gabriel-bx7tz
@gabriel-bx7tz Год назад
My wheels are cambered now so I did something wrong
@funrun508
@funrun508 3 года назад
I don't like to hit the arm to lose
@TRQ
@TRQ 3 года назад
+DUB Thanks for the feedback! 1aau.to/m/Shop-TRQ
@funrun508
@funrun508 3 года назад
@@TRQ i have different tolerance hight in front side
Далее
How to Replace Lower Control Arm 2000-2006 Chevy Tahoe
14:18
CLANCY 🦞 Operation Squid Ink (New Animation)
00:58
How to SUPER CLEAN your Engine Bay
21:58
Просмотров 50 млн
Chevy Tahoe - Inner and Outer Tie Rod Replacement
3:28
EXEED VX отзыв владельца #shorts
1:00
Просмотров 459 тыс.
tractor rear light project #project
0:40
Просмотров 14 млн
EXEED VX отзыв владельца #shorts
1:00
Просмотров 459 тыс.