Thank you! Someone broke into my car and took the button along with my reg ins etc.. while at work so they know where i live. About to change it right now
Thank you!! Our car was stolen, and the car was programmed to the garage door opener. I was worried about it until I saw your video. I am going to clear out the opener and reprogram my remote and the when we get a new car I will program it. Great video!!
Thank you. My garage door opener needs a new battery. I lost the 2nd opener so I need to get some new remotes. I was clueless what this involved. THanks.
Brother, thank you so much for this. Our garage door has been opening randomly since we leased this place and it's been driving me crazy. I've been debating if it's the wiring or someone is messing with us. I just tried this and really hope it works.
Thank you so much. I was robbed three nights ago and my garage door opener was in that purse. We have another one at home. I reprogrammed this one thanks to you. I can finally rest a little better tonight.
I was really hoping you would show how to clear 2 garage door openers not just one. I can get one or the other to work doing that but not both remote openers.
@@LocksmithRecommended Have done this to my property and what a money saver! Locksmith have told me its $88 plus callout of $198 to setup and program remotes. I followed your steps and was able to reprogram by myself, and also buy a new remote. :) Thank you so much!!!!
Nowhere on RU-vid have I yet found anyone who knows how to determine the frequency of the remote unit if frequency is not printed on the unit and if not a dip-switch type. My local locksmith shop had a fancy frequency-reader for expensive car key frequencies but could not determine my garage door remote unit frequency. Any suggestions?
Just bought a house and it only came with only 1 remote, so this was very helpful! I do have a few questions though: When I reset and reprogram, it looks like it's done 1 remote at a time. Each time I reset to add another remote, will it lose connection to the first remote? Is it possible to add multiple remotes at the same time? Thanks!
Thank you so very much I was able to sync my existing transmitter again. I think the battery was old and they stopped talking to each other. Replaced the battery and I am back in business thank you again
Thank you very much for this excellent tutorial. In my case I have a 1993 Craftman, I recently bought a new remote control and apparently when I was pairing my remote some neighbor activated theirs too. Now when he uses his remote my door opens. I tried to delete the codes paired to the receiver but even if I pressed the button for 10 seconds or half an hour the red LED did not turn off and did not reset the programming. What can I do? I have already removed the power for hours and tried again and the problem is still there.
I've solved the problem. I connected the motor to a power outlet controlled by Alexa. That way I can allow the power to flow only when I'm going to use my remote and disconnect the power supply when I'm not going to use it.
so by doing this it will generate a new code from the opener itself? reason is one of our nieghbors vehicle door fob opens our garage door and this appears to be what i am looking to do to chamge that, correct?......thanks will try it out
This is exactly my situation. New home with missing remotes. Do the old remotes need to be near by to be disabled? or are you actually changing the receiving code in the master unit by your action? Pretty sure I know the answer, but want to be sure. Thanks. I'll purchase two new remotes tomorrow.
How do we add more than 1 remote? I seem to program my two remotes but every time i press the remote to open it, the garage only opens it a couple of inches then stops. I have to keep pressing it so it can eventually open a few inches at a time each time i press the button
Great video, good to know. I just rented a place and only got one door opener so I'm definitely gonna erase all codes and start over. One question, every so often my door won't open and I have to unplug it from the ceiling, wait a few minutes and plug it back in and then it will work again. This happens about once a week. Any reason why, thank you.
Hi Locksmith recommended, I have an old Sears Garage door opener made long before 1990. I have the Sears remote with it. It is an 8 dip switch remote that worked with my 9 dip switch garage door receiver. I programmed my vehicle to open the door, and now the remote will not work. The battery is good. Its not the antenna or the light bulb causing it not to work. There is no learn button on my garage door opener, and there is no button to clear the code. I cleaned the circuit board on the remote, and that didn't fix it. The dip switch codes are matched. I even bought a universal remote with 9 dip switches which I matched, and that wouldn't work either. The door works with the buttons to the opener and with my car but not with either remote. I am totally perplexed.
how do you program 2 remotes for same garage door? Every time I have one programmed, the other stops working; when I tried to hit both simultaneously to relink, only one, or neither, would work. I appreciate your help.
Should be no issue. You just add the second one in. We have instructions for several other brands in our article www.acmelocksmith.com/blog/how-to-clear-garage-door-opener-memory-add-remotes/
Our opener was programed for two garage doors as follows; The large button was programed to work the main door, one of the secondary buttons also controlled the main door, the other secondary button was used to open another smaller door. Do I use the same procedure to program the secondary buttons as described in your video?
What can I do if I hold the learn button down to erase or clear all other remotes.....BUT the light never goes out.... and as such... it's NOT clearing out anything
When I search about garage remote, garage door 99% of the vidoes showing 80's very old classic garage motors. Is there any video for new garage motors?
My mother misplaced her opener. We found another one that works with a different garage door manufacturer. Can it be programmed to our door even if from different company?
I would never program my car's buttons. If someone breaks into the car they can open the garage door. Would you recomend doing this on a new opener? Especially if you have someone install it?
Ok Robert, question I have the xtreme garage door opener. Went on vacation came back the o ly thing that opens and closes the door, is the outside remote pad. It works fine, but the wall button or any remote does not work. When try to reset a remote it beeps 3 times but does not work. Help....lol
I got one remote to tune in. I have 3 remotes that I want to all work. I cannot get the other 2 to work. I have gotten them all to work individually but wont all work together as when I tune in the next it cancels out the other. Really appreciate some advice/help please.
You don't need a new remote. Clearing out the system will remove any remote you don't have from the system so the door won't open with them any longer. Then you add the ones you have back in so that they will work for you.
Hi ! I have a old lynx 455 garage door opener that works great ,problem is the add on receiver only works when I stand two feet in front of it. Any suggestions ? thank you !!
Thank you for this information Acme. I have a question please. I originally had two remotes received with my system. But a previous resident has one of the remotes and hasn’t returned it. If I were to do this reset will that then block that other remote from working?
Be nice if you had instructions for programming the remote you sell for my Wayne Dalton Quantum 3213 garage door opener. Instructions that came with it don't work.
Thanks Robert for that info…I’ve been pulling my hair out having lost my 1 and only Remote that was here when I bought my house…it’s an old Autodor type fitted I reckon in the 1970’s here in the U.K. Will any universal one do the trick…I’ve yet to investigate for a Learn type button though…there are 3 terminals marked 1,2,3 spaced out 1 is in RED with wire attached…2 is in WHITE with wire attached…3 has no wire attached….and a fairly chunky square GREEN button with a green LED beside it…there’s no word beside it…do you think that will be the learn button?…the numbers on the back of the unit are…….132 B 2052-1 and elsewhere….132 B 2164…any help would be very much appreciated…many thanks in hope…Brian
Being that old, I suspect your garage door openers are different than ours here, but you should be able to find something that will work. I'm not much help on this one. Sorry.
@@LocksmithRecommended Thanks Robert for your swift response…I’m guessing age in hindsight as I know the garage was added around 1970 but the Autodor possibly later…the remote I’ve lost was a black rectangular box with a metal clip on the back and a white band across the front of it…I don’t know if that’s helps in anyway as to it’s origin…Brian
That depends on the garage door opener. Sometimes they're random codes. But it's the garage door opener that is programmed to read the codes that are emitted.
I have wiped my garage door opener memory clean. However the wall mount push button control is no longer working. Power is working and door opener is receiving message so to speak but nothing. Can you help, with what I'm doing wrong. Once slate is wiped clean do you have to reprogram the wall mount?
I'm at a loss. I have a Wayne Dalton Model 3016. Tried to add a remote and now none work. I tried the push the unit button and then the transmitter button but that didn't work. Then I held down the transmitter button which made its led light flash then go solid and then the door activated. But then the button wouldn't work again. I can't find any manuals or Wayne Dalton troubleshooting anywhere to help me.
Hello: I’m sorry if this question was already asked. I bought a home and neither of the garage door openers were left. We have to open the garage doors using the buttons on the wall from the inside of the garage. Is the best option to purchase a universal remote?
It is. We sell them here. www.acmelocksmith.com/buy-safes-online/universal-garage-remote.html If your garage opener has a button with a blue, green, yellow, purple, or red button, it should work.
I bought an older home that has a perfectly good Chamberlin garage door system (motor) only issue there was no opener given at closing, I tried to program a universal remote opener with no luck.... my question is could this motor just be too old to reprogram a new remote?
If it has a purple button or a small yellow round button, the a universal remote should have worked so long as the remote supported the Chamberlin. Here are the instructions: www.acmelocksmith.com/blog/how-to-clear-garage-door-opener-memory-add-remotes/ Here is a remote we sell that should work if you have either of those buttons: www.acmelocksmith.com/buy-safes-online/universal-garage-remote.html
Hi, I have a Hercules model RCD225 unit. It doesn't appear to have a learn button, but does have dip switches. The replacement remote I use is a Challenger 390 and it doesn't have dip switches?? How do I find another remote control that will work? Thanks, John
I have the same model opener. My garage door opener wouldn't open with my old remote, and I used this trick and I got my door to finally open after 10 years of being closed! (My release string is broken) My torsion spring went bang and an about 1 inch gap exploded in the middle of it. It's weird, I can stop the door in the top position, but when I stop the door in the middle to get some sunlight in, the door crashes to the ground with the opener arm attached. Help if you can.
Clearing/Programming garage remotes for security reasons is about as far as I go with them. You're going to need someone who works on garage door openers.
You don't address how to actually change the program for recognized and accepted "codes" by the door opener. If previous home owner gives me 2 garage remotes for the garage door opener but doesn't clear those same codes from their car homelink/mirror control, they still have the same remote codes in their car. So if I then go and clear the remotes in the door opener and re-add the same 2 the previous home owner gave me, doesn't that just re-add the same exact codes back into the opener? Which means the previous home owners car homelink/mirror control still can open the door since it also has the same codes as the 2 remotes they gave me? My idea would be that if you actually changed the remote codes themselves (maybe toggle pins in the remote?) then programmed them to to the garage door opener, that would safely remove previous remote access and car programmed homelink/mirror controls. Please let me know if I'm misunderstanding or if I have a point. Thank you.
Holding your remote up to the Homelink basically tells your Homelink what type of signal to send (i.e. what kind of garage door opener you have). Once you do that you still use the learn button on the garage door opener with the Homelink so that it can sync with the vehicle. So when you remove everything from the garage door opener you are removing the car.
My remote quit working so I changed the battery and it only works occasionally now. I bought a new universal remote, programed it and it worked once. The remote in the car still works every time. What should I try? Thanks
Hey sorry to bug you iv looked everyware and everyone says no, long story short i smashed my car it was totaled went to get my things from it no garage door opener and its my only one is there a way to program a new opener or no i wad thinking og useing the put button in the garage to do it but people say no
Have you ever heard of a vehicle key fob that has nothing to do with the garage door but opened the garage door. I thought it was a fluke and I had the guy who was there from an air conditioning company to do a maintenance on my air conditioners, do it again and it closed the garage door. He had to go in the house to look at the thermostats and when we came back out I had him use his key fob and it opened the garage door. Has anybody ever heard of that? I think the solution is to reprogram garage door and the remotes unless somebody else has a better idea.
