Тёмный

How to Restore a Compressed Seat Cushion Edge 

Project Billd
Подписаться 17 тыс.
Просмотров 17 тыс.
50% 1

I recently bought a 2004 Rubicon TJ (my dream car) and the left side of the driver's seat cushion was compressed and worn out. In this video I restore the foam as well as it can be to give it a few more years of life before it needs replacing. This install is also seen in my dream jeep video, which can be found here: • I Bought My Dream Car ...
Keep up with the latest projects here at Project Billd by:
- Subscribing to my channel: / @projectbilld
- Following me on Instagram: / projectbilld
- Checking out my website: projectbilld.com/
Disclaimer: The following contains affiliate links. If you purchase a product through one of the links, I may receive a small commission (at no cost to you) that I can use to feed the platypus. And it’s always hungry.
Tools I Used:
Breaker Bar: amzn.to/37eBd7K
Metal Hook: amzn.to/3pMDzBh
My Steamer: amzn.to/3MrxVxY
Cheaper Alternative: amzn.to/3tqawoX
- As an Amazon Associate I earn from qualifying purchases
Music: www.epidemicsound.com/referra...
Chapters:
0:00 Intro
0:26 Remove the Driver's Seat
1:16 Remove Upholstery from Seat Frame
1:54 Steam Seat Cushion Foam
2:14 Reinstall Everything
2:45 Future Work and Goodbye!

Хобби

Опубликовано:

 

13 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 21   
@tward7397
@tward7397 12 дней назад
My wifes 2024 cars back seat had to be re covered under warranty due to some stitching coming undone. The dealer said the seat fasteners had to be ordered since they are considered a one-time use. They probably fasten ultra tight for safety reasons.
@colin5064
@colin5064 Год назад
Not a topic l have seen covered before, interesting to know this trick
@Dr_Kenneth_Noisewater
@Dr_Kenneth_Noisewater Год назад
Good, concise, to-the-point video. I have the same problem with a compressed outboard driver’s seat cushion on a 2006 TJ Rubi. I’ll give this a try since it doesn’t look terribly hard to do. Thanks!
@ProjectBilld
@ProjectBilld Год назад
You're welcome! If you've already got a steamer, definitely worth a try
@gregbacon819
@gregbacon819 6 месяцев назад
High strength thread lock is tough stuff on those seat bolts. Heat helps, but not an option around carpet. You got it done!!
@ProjectBilld
@ProjectBilld 6 месяцев назад
Yeah, it's amazing how stuck that one bolt was for not being rusted
@FD-dh2fu
@FD-dh2fu Месяц назад
Great info. Thanks.
@ProjectBilld
@ProjectBilld Месяц назад
you're welcome!
@---rg1gb
@---rg1gb Год назад
How has this held up over time? still improved over the start? Or did it just revert back to being flat?
@ProjectBilld
@ProjectBilld Год назад
It's definitely still better than before I did it. The cushion does need to be replaced and there's no getting around that but it's worth steaming an old one if you can
@justinpalmer6098
@justinpalmer6098 Год назад
If you have cloth seats, do you even need to remove the cover?
@ProjectBilld
@ProjectBilld Год назад
Not sure. Definitely worth a try before taking the covers off
@brockvazquez3940
@brockvazquez3940 Месяц назад
Can you just do this by steaming the seat while its still in the vehicle or would it not work through the material?
@ProjectBilld
@ProjectBilld Месяц назад
Don't believe it would work through leather or vinyl, worth a try with a cloth seat
@Kyle-ev4fk
@Kyle-ev4fk Год назад
Interesting,is the repair still holding up?
@ProjectBilld
@ProjectBilld Год назад
Somehow missed your comment. It's definitely better than before I did it but the cushion does need to be properly repaired/replaced.
@gregparde6160
@gregparde6160 8 месяцев назад
that's probably lock tight on those bolts. You don't want them coming out.
@loveandcrumbs1337
@loveandcrumbs1337 9 месяцев назад
What happens if you steam the cushion without taking the cover off?
@ProjectBilld
@ProjectBilld 9 месяцев назад
So I haven't tried it myself but it's worth a shot with cloth seats. If it's a leather seat it will just shrink the leather
@thejakein7867
@thejakein7867 11 месяцев назад
Couldn't you just have steamed it without removing the seat and cover?
@ProjectBilld
@ProjectBilld 11 месяцев назад
Through a cloth cover, possibly. Definitely worth a shot before taking off the seat cover. Steam will shrink leather so don't try it with leather
Далее
What you need to know about fixing Vehicle Seat foam.
31:20
Try not to Laugh Game!
00:38
Просмотров 7 млн
Luiza Rasulova #luizarasulova
00:11
Просмотров 327 тыс.
Most Common Seat Repair Auto Upholstery
22:21
Просмотров 1,8 млн
I Bought My Dream Car and it's an Old Jeep!
19:40
Просмотров 177 тыс.
Car Seat Foam Repair
12:12
Просмотров 393 тыс.
Finally upholstery foam explained DIY How to
7:42
Просмотров 35 тыс.
ТРЕШ КОНСУЛЬТАНТ 😱
0:11
Просмотров 861 тыс.
Этот Малыш Очень Умён 😂
0:20
Просмотров 4,2 млн