How To Retract An Electronic Park Brake using VCDS - AUDI/VW/SKODA/SEAT

Подписаться 5 тыс.

Просмотров 13 тыс.

50% 1

In this video we show you how to retract an electronic park brake using VCDS, on your AUDI/VW/SKODA/SEAT.
Tools required:-
- VCDS software
- Battery maintainer
VCDS available from:-
www.ross-tech.com/
DISCLAIMER
Only carry out this procedure if you are a competent professional, with sufficient knowledge on the task being carried out.
Don't Forget to visit our website and online store!
www.dtb-performance.com

Авто/Мото

Опубликовано:

4 май 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 19

@MeltingRubberZ28 3 месяца назад

You are a lifesaver man thank you!

@DropTheBoxOfficial 3 месяца назад

No problem 👍

@itwasntme4137 5 дней назад

Thanks pal very helpful.

@DropTheBoxOfficial 5 дней назад

Thanks for the feedback 👍

@stco2426 4 месяца назад

Fab, many thanks for this. I have a slightly sticky rear brake on a mk7 GTD and need to investigate. Quite happy to do the mechanicals but not worked on a car with an electronic handrake before. This has given me loads of tips to investigate and see if anything's not right and work out the problems without messing up. Thanks! Need to go and dig out the wind back tool. 🤔

@DropTheBoxOfficial 4 месяца назад

Thanks for the feedback! 👍 If you have any further questions don't hesitate to give us a message!

@kaskade2732 9 месяцев назад

Thanks mate very clearly explained 👍🏼

@DropTheBoxOfficial 9 месяцев назад

No problems 👍

@kapitancieno1 2 месяца назад

Thanks it helpt me a lot

@DropTheBoxOfficial 2 месяца назад

No problem 👍

@garagepasa 3 месяца назад

Perfeito! Me ajudou muito!

@DropTheBoxOfficial 3 месяца назад

Thanks for the feedback 👍

@reinforce-games 2 месяца назад

Thanks for the video! Before doing the start lining change mode in VCDS, do I have to manually release the handbrake?

@DropTheBoxOfficial 2 месяца назад

Yes, release the handbrake via the park brake button before starting lining change mode.

@billyleon131177 2 месяца назад

Hi !! With this version of vcds i can change brake pads in new cars with SFD ??

@DropTheBoxOfficial 2 месяца назад

We haven't had an opportunity to test this yet. Probably a question for Ross tech forum.

@drkchocolatguy Год назад

Today I set my parking brake and when I returned to my vehicle to leave the brake would not disengage. There are no errors on the instrument cluster and everything appears normal. I can tell the parking brake button is still working as when I pull it up and hold for 15 seconds I get a P with a strike through symbol on the instrument cluster until I let the park brake button go. What are the chances this process could retract the parking brake without having to disassemble the parking brake actuator from the caliper and putting power direct from a battery to the connector on the actuator? I'd prefer to use the VCDS software.. but lots of videos showing how to do it without doing that.

@DropTheBoxOfficial Год назад

Hi Emanuel, firstly we would recommend that you connect your vehicle to a diagnostic computer/VCDS and check that there are no fault codes within the brake system. The process in the video is the correct way to retract your park brake actuator as recommended by the vehicles manufacturer, as long as there are no other issues with your braking system this will work for you. A few suggestions for you.... Check that you can hear the actuator working when you retract the park brake. Once you've retracted the park brake check that your caliper piston and caliper sliders are not seized. There's also another video on our Channel that may help you. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-fxhRalV6cJ4.html Hope you found this helpful! And thanks for commenting 👍

@drkchocolatguy Год назад

@@DropTheBoxOfficial strangely, I came to the car today, started it and disengaged the parking brake and it worked. After a few hours yesterday it did not resolve itself, but an overnight sleep did. I connected VCDS and found the button itself is faulty.