I've never tried the LRK one. However, on a forum there are those who think LRK is better. LRK is more suitable for long stators, and dLRK for short stators. That's his opinion after trying to change the 12N14P dLRK brushless motorbike to LRK. Because (in his opinion again), LRK has more space to wind the wire.
@@YudiHermanto4H i'm making one 12 Pole bldc motor (outrunner type)....to make a diy cooler ....the rotor size (diameter ) about 12cm ....and i want the speed of 2500 rpm...i have 12v 10A power supply to run it...for which winding i should go ......DLRK or LRK .....please reply me....sir
Of course, the efficiency of the motor will not be maximized. For example, if the efficiency is good, you will get 15000 rpm, because the efficiency is not good, you will only get 14000 rpm. That's just an example. Many things affect efficiency, some examples are the stator material, the magnet used, the distance between the magnet and the stator.
@@YudiHermanto4H thanks for that. I ask because i rewound a small generator on a kubota style generator (it had burned) Single pole round magnet. When I took the old windings off, I was surprised to see that a; the windings alternated direction (I understand that now, thx to your video), and b; the windings were close, but not the same and one was considerably smaller. . What would happen if, for example, i had replaced each coil with half the number of windings?
Mas untuk penggunaan jumlah dan penempatan magnet ada rumus tertentu ga ya jika ada tolong informasi dan penjelasan tentang rumus trsbt dan untuk bentuk lilitanya harus seperti apa untuk penggunaan dari jumlah stator dan magnet yg berbeda jumlahnya mas.terimkasi mohon bimbinganya🙏
Sebenarnya DC, tapi outputnya berubah-ubah secara bergantian antara 3 output. Misal 2 output positif, satunya lagi negatif. Tapi diatur sedemikian rupa dengan mendeteksi posisi magnet pada rotor sehingga di koil stator terjadi medan putar untuk memutar rotor.
@@RayyanSaputra-r2s motor brushless 3 phase, jumlah lobang harus habis dibagi tiga, atau jumlah nya kelipatan tiga. 3, 6, 9, 12, 15, 18, 21 dan seterusnya. Kalau 17 lobang berarti tidak bisa.
@@YudiHermanto4H tp bawaannya ada 4 fase mas 1&3 lilitan arahnya sama 2&4 lilitan nya berlawanan dengan 1&3 bisa berputar pke controller 48v cuma putaran pelan tp torsi kuat
Kalau hitung dari nol saya tidak bisa. Saya biasanya pakai perbandingan. Kalau misal aslinya pakai 12V, hitung jumlah lilitan originalnya. Kalau misal mau naik ke 48V, berarti naik 4 kali. Maka jumlah lilitan naik kisaran 4 kali juga. Otomatis diameter kawat diperkecil.
Stator nya ya ? Tidak bisa, mas. BLDC 3 phase jumlah pole stator harus berjumlah kelipatan 3 atau habis dibagi 3. Kalau yang tidak habis dibagi tiga hanya bisa untuk satu phase. Tapi BLDC satu phase kurang bagus mas, dan driver/controller nya berbeda.