HOW TO: S2000 Steering Wheel & Quick Release Install

Подписаться 1,3 тыс.

Просмотров 57 тыс.

50% 1

How to install a steering wheel in a Honda s2000. Step by step instructions on how to install an OMP Superquadro Racing Steering wheel, NRG Short Hub, and NRG Quick release in a Honda S2000. I was really pleased with how this came out. This is an excellent wheel for use in my S2000 dedicated track car.
Part numbers that I used:
NRG Short Hub: "SRK-131H"
Available here: amzn.to/3q1Vtif
NRG Quick Release Gen 3.0: "SRK-650BK"
Available here: amzn.to/35ohT3M
OMP Superquadro Steering Wheel(330X290): "OD1990-NN"
Available here: amzn.to/3q3BZdc
MOMO Steering Wheel Replacement Screw Set: "MOMO-SWSCREW10"
Available here: amzn.to/3q2aS2c
This actually wasn't needed as my steering wheel came with screws!
As an Amazon Associate I earn from qualifying purchases. Thanks for supporting my channel!
***PLEASE NOTE THIS VIDEO IS TO SERVE AS HELPFUL INFORMATION ONLY AND THE MAKERS OF THIS VIDEO BARE NO RESPONSIBILITY FOR ANY DAMAGES INJURIES OR LOSSES OR ANY OTHER OUTCOMES WHATSOEVER RESULTING FROM THE USE OF THIS VIDEO. AIRBAGS CAN BE DANGEROUS! USE PROPER CARE WHEN REMOVING/HANDLING AIRBAGS. PLEASE NOTE THAT THE CAR DEPICTED IN THIS VIDEO IS A FULLY DEDICATED TRACK CAR THAT IS NOT ROAD LEGAL. REMOVAL OF FACTORY SAFETY EQUIPMENT SHOULD NEVER BE DONE ON CARS DRIVEN ON PUBLIC ROADS OR ON CARS THAT DO NOT HAVE ALL OF THE OTHER APPROPRIATE SAFETY GEAR FOR TRACK USE!!! Always measure twice and cut once and wear proper safety gear.**

Опубликовано:

5 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 80

@MaXGTS1 6 лет назад

Just a heads up. This type of racing steering wheel material, alcantara or suede, is meant to be used with racing gloves. If you don’t use them it’ll soon become an ugly matted down mess from the oils on your hands.

@OvertakeVideo 6 лет назад

This is what I thought too intially! It kept me from getting an alcantara steering wheel in a street car for a long time. Who wants to wear gloves in a street car?! However, my Porsche GT3 came with an alcantara wheel and shift knob. Both were matted and looked pretty bad from many thousands of miles of street use with no gloves. it was so bad I was about to shell out over $1k for a new wheel-- but a buddy of mine is a detailer and he used some cleaner and a soft cloth on it and it looks good as new. I did further research on it, and as long as you clean it regularly(every 10k miles or so) with the right cleaner, it actually holds up better than a smooth leather wheel. I would never have believed it if I hadn't seen it for myself.

@MaXGTS1 6 лет назад

Yes, if you take the time to clean it it should keep it looking good much longer. I'd like to change my s2000 wheel but would like to keep the same distance from the dash to the rim. Wondering what the lowest profile quick release would be. Btw, I have that same OMP wheel on my PC sim racing rig. Nice choice.

@lancercool1992 6 лет назад

I stopped caring after a while, I noticed some race cars have ugly alcantara wheels too, after all they don't wear gloves just to move the cars in and out of the garage.

@gradymax9109 3 года назад

Instablaster...

@Nalla1223 10 месяцев назад

The only video that showed how to correct wire the airbag in the ap2v2

@OvertakeVideo 10 месяцев назад

Thanks!

@Momopeach 7 лет назад

Sick mod! Been looking for a vid like this forever. Seems like a good steering wheel imo

@daddyyowcedric7687 6 лет назад

.this is very helpful brother thanks

@OvertakeVideo 6 лет назад

Thanks so much for your kind words!

@BradOnCars 6 лет назад

Thanks for the video! Looking to replace mine too (02 AP1).

@sotired9970 4 года назад

You lose the ability to use cruise control with this wheel? Any options for retaining function while keeping quick release?

@OvertakeVideo 4 года назад

Yes you are correct-you will lose cruise control. I am sure someone smarter than me would be able to figure out a way to keep it, but mine is a track car so I never use the cruise anyway:)

@vallasjo8003 5 лет назад

OMP!

@SuperOrlando05 5 лет назад

exelent explicación.

@Sunny-s1de 6 лет назад

The wheel seems to flex a little forth and back when you put it on, and I mean around the hand positions. It is a genuine wheel right? Not ebay version? Would you say it has a little flex or you didnt notice any at all?

@OvertakeVideo 6 лет назад

Sunny this is a genuine OMP wheel not an eBay knockoff. I think it looks more flexible in the video than it actually is. I was pulling on it really hard to make it flex like that. I have never noticed anything like that when driving it -even under extreme g force situations on track. This wheel is excellent. Thanks for your comment!

@chriscas-ToolAficionado 5 лет назад

Since you've been running your quick release for a couple years now, has it developed any play at all? The only thing that stops me from purchasing a NRG unit is the long term durability of the unit in terms of excess play. Input would be much appreciated.

@OvertakeVideo 5 лет назад

ChrisCas - Tool Aficionado no play at all and no issues. I have heard they can be hit or miss though.

@chriscas-ToolAficionado 5 лет назад

@@OvertakeVideo cheers, thank you.

@luisavila8973 5 лет назад

Where can I buy one ?

@garrisonk8627 6 лет назад

i want this for my ap1

@yamahaSHO 4 года назад

Used this video completely to install my new wheel this weekend. I appreciate the video! www.s2ki.com/forums/s2000-forced-induction-142/efr-7064-twin-scroll-iwg-pfab-top-mount-v-mount-build-1167374/page8/#post24723611

@jessytvthailand379 5 лет назад

How you buy this from

@k24accord73 6 лет назад

Hey i got an nrg..where the hell do i ground the black wire to..coming out of bottom of second piece quick release..i had it grounded on the hub that thig go off everytime i put on steering wheel..or should i get an extra long black wire and ground it another spot..i stink at electrical..fyi💩

@jonathanarbelaez737 5 лет назад

Hey man by any chance did you add resistors to your cables on the driver side to get rid of the are ? I'm trying to I stall my recaro seat I have on my other car but I can't get any info for the resistors for the SRS sensor on the driver seat Cheers

@nhbackcountryrider 5 лет назад

What’s the measurement from the face of the column covers to the face of the steering wheel?

@OvertakeVideo 5 лет назад

Andrew LaValley let me get a measurement when I am back home!

@nhbackcountryrider 5 лет назад

Overtake I ended up going with the new race hub from them and ordered a spacer after figuring out where I wanted the wheel. For the horn I’m going to use the cruise switch to activate it. Thank you though

@OvertakeVideo 5 лет назад

Andrew LaValley ah ok good deal! Glad you got it figured out.

@AlexCastro1 5 лет назад

can you use any steering wheel (sparco, nrg, momo, etc) or does it have to be that specific one?

@OvertakeVideo 5 лет назад

Alex Castro this should work for other wheels as well. You will want to double check with the seller, but the bolt pattern to attach the wheel just needs to be the same.

@AlexCastro1 5 лет назад

I'm looking to put in a sparco L575 with the same NRG short hub and NRG quick release, do you think it will fit ?

@1389Mxer 7 лет назад

One of the best/thorough vids good job... but my god man its foot pounds not pounds foot lol

@OvertakeVideo 7 лет назад

Thanks! Yeah for some reason I interchange the two depending on the context.

@RSX06MM 7 лет назад

Overtake is correct. The correct way is "lbs-ft" when expressed in Imperial units (what is commonly used in the US), while the rest of world (and all of engineering) use the proper SI units, which would then be expressed in "Newton-meter (N*m)". I think everyone just naturally says "ft-lbs" (I am guilty of it as well) because it rolls off the tongue easier and doesnt sound goofy. And also to Overtake, good video. But when you did torque the bolt for the hub, you shouldve actually calculated a bit more to compensate for the long extension you had on the torque wrench. The torque spec you had it set to, is for if the socket was directly connected to wrench. By adding the extension, you are losing some force thru the torque action.

@DavidHernandez-dc3to 6 лет назад

What amp are the fuse you’ve used on the resistors (bypass)?

@OvertakeVideo 6 лет назад

Hi David, unfortunately I am not sure - it was included with the NRG kit.

@tbod8124 5 лет назад

What is the horn adapter wire you used called, ran into the same issue with my wheel. Also great video, very helpful.

@OvertakeVideo 5 лет назад

T Bod I will have to look. It was just some wire I had laying around. Sorry for the vague reply-traveling right now.

@ToogiDesign 7 лет назад

did you have any issues with the width of the sparco seat when using buddy club low-down rails? I was not able to mount up my evo 2 plus using buddy club rails. just too wide it seems. I ended up fabbing my own brackets...

@OvertakeVideo 7 лет назад

I actually have a separate video that details my Sparco Circuit 2 seat installation. Long story short: If I was shorter and didn't have to have the seat mounted as far back away from the steering wheel and pedals as I do, the Circuit 2 would be no problem with the buddy club rails. To get the seat back as far as i wanted, i had to trim the right side thigh bolster of the Seat and i had to trim the S2000 hardtop where the left (drivers side) halo wing hits the hardtop. I also was not able to get the Circuit 2 as low with the buddy club rails as with my previous, more narrow, Recaro Pole Position seat.

@OvertakeVideo 6 лет назад

Just an update:Ii have now gone to the PCI seat mount and it is much better than the buddy club rails.

@eric-cs2qi 3 года назад

How tall are you?

@EndlessXConcertgoers88 6 лет назад

How's the drive on the long run with this steering wheel?

@OvertakeVideo 6 лет назад

Darkmand8 so far it has been great. I have no issue seeing the gauge cluster on track. So far it has held up really well and I have not had any problems with the wheel or with the hub/quick release.

@EndlessXConcertgoers88 6 лет назад

wondering how tall are you? i'm about 5'8" just making sure I won't have problem seeing the cluster. I been owning my s2000 2002 for a while and started noticing my ankle been hitting the steering too. Personally, for me I like doing togue run and hoping this will improve my driving experience.

@OvertakeVideo 6 лет назад

I'm 6'2" you will definitely have no issue seeing the cluster. It was fine for me.

@EndlessXConcertgoers88 6 лет назад

thanks bro!

@lancercool1992 6 лет назад

I'm 6'3", first aftermarket parts were steering wheel spacers and a fix back seat, impossible to drive the car comfortably without

@yudelvyfuentes5607 5 лет назад

💎👌

@tomrast9629 7 лет назад

how do you like the steering wheel on the track is it closer to you than oem? i was thinking to buy one ,just wonder what quick -release hub adapter you bought ? thanks

@OvertakeVideo 7 лет назад

This steering wheel is excellent on the track. I do believe in the end the steering wheel is a little bit closer to you than the stock one was. The flat bottom gives me additional knee clearance for heel/toe downshifting and (unless you get the car really out of shape or you are maneuvering around at low speed in the paddock/pits)you never put your hands on that flat part of the wheel. Here are all of the parts I used: NRG Short Hub: "SRK-131H" NRG Quick Release Gen 3.0: "SRK-650BK" OMP Superquadro Steering Wheel(330X290): "OD1990-NN" MOMO Steering Wheel Replacement Screw Set: "MOMO-SWSCREW10"

@tomrast9629 7 лет назад

thank you

@EndlessXConcertgoers88 5 лет назад

Notice after installing my omp steering wheel I'm getting stiffness when turning, wonder if you have the same issue?

@OvertakeVideo 4 года назад

I think that is just because it is smaller diameter-I notice the same thing at low speeds in a driveway or parking lot.

@feeture 5 лет назад

How is the suede holding up on the steering wheel since you installed it 2 years ago?

@OvertakeVideo 5 лет назад

Great! But this is a track only car for me and i always wear racing gloves when driving it.

@feeture 5 лет назад

@@OvertakeVideo Oh ok cool... I was looking for that same wheel with leather and the red stitching but it only comes in suede with red stitching so... I'll be getting the suede one , but yea my S2K is a daily so there's only one way to find out I guess lol cheers.

@_juan2k 4 года назад

Feeture ive has one since June 2019 and it’s messy lol I cleaned it recently. Next steering wheel purchase will be a leather one.

@feeture 4 года назад

Juan2k yea I got nrg suede one like a month ago and so far so good I’m just careful and make sure my hands are clean might get some gloves depending on how it holds up, but it’s good so far. We’ll see how it holds up in the coming months... I like it so far. The wheel I have doesn’t come in leather, but if it gets bad I’ll just get a leather wrap for it maybe if anything or just use the suede cleaner and black suede dye I have to do touch ups.

@daddyyowcedric7687 6 лет назад

the horn works ?

@OvertakeVideo 6 лет назад

Daddyyow Cedric yes the horn works!