How To Save Electricity Bill at home | How To Reduce Electricity Bill | How To Reduce Current Bill 

Doğrudur.👍

Thanks for the explanation Debola...

👍

Great Analysis... But will that be a exact solution to bring down the bill?

So....... ........ Should we do this or not...

Actually we can assemble solar cell.

Solar free kya,???????????????????

Ppll e.

Excuse me, can you help me!? How I can now the size of capacitor needed for the certain circuit or calculation.

@@mfaumesuya7980 not very easy. Inductive load usually are electric motor. And the phase error should be not more of 0.8 cosene. But, there is a but. The phase error is not stable, it depends also from the mechanic load of the motor. There is no way to calculate time by time the phase error. But, on big installations there is an electronic box that has inside of it a three phase detector. Is a cmos CD4046. this IC together with step-down transformers will detect current error phase in rispect to voltage and a microprocessor will add or subtract capacitor on to the line in binary logic. In this way error phase is correct immidiatly in respect to the load. Other ways today a switching mode power supply or PWM power unit are used but electric motors are totally different in rispect to traditional motor. They are a three phase step motor (that how they are called) nowadays air conditioner, fridge, washing machine etc. are using this type of technology and they are called energy save. If you want to save money on electrical bill just unplug TV, DVD, hi fi, and all electrical home use staff when you don't use them. Think that a TV in standby drows about 2 watt hour. In 24 hours are 48wh. Time that for each TV at home, time that for eac dvd reader, time that for each computer connected at home and at the end you time that fo 365 day in a year and you will See how many kwh you pay without using them. Good luck.

Per day 1-4 units or per month??

Home lo motors untene .. capacitors use avutay orelse no use...

750 ,to 250 impossible , as there are fixed charges from rs 50 to 150. Max 5 percent of variable cost may reduce.

It is better to use cap at induction load instead of supply...

@@tharunetikikota7442 how abt a 40kohms resistor on the neutral to reduce back current flow, hope to remove 6 amps back flow...... any advice any untoward reason it shd not b used

Đ

USE VOLTAGE STEBILISER IF APPROPRIATE CAPACITY

🤣 by the way what is the difference between KWH and KVAH?

@@nikamabhijeet KWH is kilowatt hour and KVAH is kilo volt ampere hour. For house bills kwh is considered and for industrial bills kvah is used. For KVAH calculations power factor is considered which can be 1 or less.Kwah can be equal or more than kwh.

True

@@nikamabhijeet kVAH. Is voltage * current* 1000* time in hour while kw is kvah*cos(phi) KVAH is apparent power while kw is actual power considering the phase lag Or lead. For resistance loads (phi) is zero and cos(phi) is one... Capacitor is used for correction of powerfactor to unity or nearby... In India current is measured in kw and not kva so adding a capacitor will only increase the current bill.

@@MrCool-vi9wh lol. w=VA

May use 2.2 mfd to 6 mfd to each inductive load, in parallel note if capacitor gets short circuit, fuses will be blown. I don't think it saves power

Great point

Bull shit

Really, how

No power seavig no reduce light bill. .

Switch to BLDC fans , use windows with net instead of ac at night .

Ùý6yýý

Lljjljljljjjjlljljjjljjjljjjljjljjlljljljjjljljjjjjljjljjllljlljlljlllllljlljjlljljljllljljjlklljjljllljjlljlljljjljlljljljljjlllllljljjljllljlljljllljljjjllljlljjljjjlljjljljjlljlllj 🙏lljjljjjljjljljljllljljlljllllljljljlljjlljklljjlljlllljljljljlljlljlllljljljkljlljllljlllljlljljjllljljljlkklllllljljljljjllljljljllllljllljljlllllllljllljlljljlljllllljljll

Simple switch off it or ,😏 throw out from house

5 micro farad, 400 volt. BUT do not count on it to reduce cost. test it. it might. needs accurate calculation and measurement.

Thank u sir

Watch less TV programmes, never use aircon. 100% save you money. Capacitor is bullshit.

dont try this it will not work on heating and , lighting load the fellow who uploaded is non technical fellow.

Go solar

Brother forget about electricity bill, if electricity department came to know (since it is unsafe), they will file a case against you, and also power supply will be disconnect to the residents, please don't do this.

Eugene Pohjola, this video is made only for the benefit of the uploader to get views and make money

@@eltonpereira875 Howdy. Aha OK. That explains a lot. Regards.

Correct ga chepav🤗

Nagdemo ka hnd mo cnabi kung anong klase capacitor kung ilan watt o ilan ang voltage

No you are wrong. Technically this is been encouraged by electric company. This system makes electric company and the end consumer to get higher efficiency. This improves POWER FACTOR.

@@rishibharadvaaj5485 Can you mention the name of such electric supply company who encourage to do this type of illegal activities. In my state the electric supply company by name CESC (Calcutta Electric Supply Corporation) has initiated ample legal action against the consumers those who attempted to apply this trick and was caught by the Special Task Force team of West Bengal State Electric Board.

@@JM-lg2go I don't know about the (CESC), but in Karnataka this is not illegal. I've been told by our lectures when I was in the college and even told by the senior engineers when I was working in an Aeronautical company's substation.

@@rishibharadvaaj5485 Do you know what is written Under SECTION 138, Clause (d) & SECTION 151(B) of Electricity Act, 2003. Try to find it and read it clearly, that will help you to update your knowledge about this thing and the legal punishment mentioned under this section if any consumer tampers or alter the reading of the meter placed by the supply company to record monthly consumption of the consumer for Billing.

@@JM-lg2go By this I'm sure that you are neither an electric engineer nor an elec.technician isn't it. This not tampering of meters by any means. This is technically called improvement of power factor in any equipment which includes coil windings such as motor, fan etc... This is applicable only to AC current not for DC current. In the winding there is a phenomenon called inductance, in which induced EMF (Electro Magnetic Force) produces reverse current which resists the incoming current this is called "LAGGING OF CURRENT WRT VOLTAGE" and reduces the efficiency of the equipments. This is measured in the scale of 0 ,0.1, 0.2..... upto 1. 0 means lowest performance 1 is max efficiency. When capacitor is connected parallel to the supply it maximize the current at incoming to overcome the resistance which is called " LEADING OF CURRENT WRT VOLTAGE". I think your are now convinced. If not, then you can check the other comments in this video or search for term "POWER FACTOR"

I think he is doing some magic 😜

@@lokeshwaran.03 Yep! Modern tech magic just by a press of a button amazing things happens.

I don't understand

Capacitors already inbuilt with motors ..so dont need to connect

5 kvar

55 uf

55microfarrad?

If iwanto conet the the capacitor please iwe let you know thank sir

55 uf

55 uf

It will work only if you have many inductive loads in your home, mean such as motors, tube lights transformers etc. Not for heaters hotplates like resistive loads.

ELECTROPRIME a12070900ux0256 Single Phase Motor Running Capacitor 15uF CBB60 AC 450V w 2 Lead Wires

This technique works only for high inductive loads, for domestic loads like household only real power is accounted. This technique won't work for domestic connections.

Your understanding the usage of capacitor in DC circuit is absolute, but likewise capacitor it makes the current leading in an AC circuit. So while residential customers has almost and always has an inductive load like every appliance which has a coil that makes the current lagging from the induced voltage then you are paying the cost of the apparent power instead of just simply be the real power since we are in AC circuit. In an AC circuit we have a power triangle. Apparent power is a vectorial sum of the real power and the reactive power, hence you have inductive load and aiming to pay only real power which you are likewise only using you have to make the voltage and the current be in phase or in unity that is then the use capacitor.

@@Ukruins Good analysis. Please also explain what would be the impact on the power meter reading, ie. apparent powe consumption and actual power consumption? Will there be any savings at all by using the capacitor as above?

@@GKVVx If the AC circuit given is inductive load as what we have stated above then you are correcting your power factor from lagging to unity by including capacitor in the circuit, that this would comes out that your apparent power be equal to the real power and or your outcome circuit would be purely resistive and the inductive reactive power would likewise eliminated then eventually you are only paying now the real power consumed in a particular time and you would be paying less, but need not to put capacitor in a purely resistive load and or else you would be paying more since you are from unity to capacitive load. To determine your present load you can use Flukes multi-meter this would register the power factor angle and eventually determined the current either be leading or lagging in a particular angle and that’s only then to clearly know the capacitance of capacitor to use to at least comes near to a unity if known that the current is lagging or the circuit is inductive.

​@@Ukruins sir can iask a question ❓❓ is it true that installing capacitor help to lower our electrical consumption???

Use AC(AlternatingCurrent) capacitors....oil filled capacitors..all these I have been using...but be careful while disconnecting they will be charged....keep away from children...

How many uf for run capacitor...

correct, useless for home, rather it is a fire hazard the capacitor becomes extremely hot after one hour and may explode

do it inside home line

😂😂😂

Capacitor bank is recommended by government. Not illegal. For ht lode government do not accept connection without CAPACITOR BANK for power factor standards. But this is fake video

ELECTROPRIME a12070900ux0256 Single Phase Motor Running Capacitor 15uF CBB60 AC 450V w 2 Lead Wires

55 uf

Sa totoo lng puro kayo palpak hahaha

55 uf