HOW TO : Sea-doo Fish Pro Bilge Pump Install (Step by Step) 

Good install but bad location for the discharge. I installed a 100gph bilge in my GP1200r and i put the discharge in the back. Much easier for the water flow, also you shouldve used a float to make it automatic, that bilge pump will burn out if it constantly runs dry..

Hi guys, Seadoo have a plug and play bilge pump made for fishpro and there is an outlet position allocated that ejects the water out threw the jet outlet. There is also a mount adjacent to the transducer for you to bolt the builder pump to. I just got mine installed by the dealer

Awesome….you could also have little hose to plug to the outside so you can dump the water outside the ski too. Great video brother.

Great detailed video man. Very informative. Thanks and great job!

Thanks for the great video. This gives me some confidence to do it on my own.

Great video! Well done and very informative 👏

Awesome info and video. Thanks for sharing. Cheers from 🇨🇦

You are my hero - wish I had the guts to tackle that.

Awesome video man. Very very insightful.

Good on ya for going the extra mile to install a bilge pump; I think all PWC's should have one. I installed a Whale Supersub SS1212. It has an electronic sensor (not a true float switch) and I wired it directly to the battery with an inline fuse. That way, it will kick in even if the ski is unattended. The problem with the OEM setup is that it only works if the key is inserted.

Great job making the video, take care and greetings from Florida !

Great Video!!!

Interesting and informative 🇯🇲

soo smart for a bilge good job on video..

Good job 👍

Great job man!! I just purchased my 2023 fish pro trophy. I definitely need to learn alot , about these things.Your num # 1 fan 👍😂.

Nice job just not sure if I’m feeling that billage pouring out in to the feet wells, esp for us up North people. Our water stays cold way into July. Easily remedied

Hi Emmanuel Im Blair from Australia first time ski owner and first time viewer of your channel and I'll like and subscribe 😊

You can buy that pump with a built in float switch... will only run when water reaches an inch high. When water lowers it turns itself off.

Hey man great videos been watching them one after the next but just wasn't sure about the JB weld thing.

Love your vids! I put a link earlier to a picture of a Rule 3 way switch, but it looks like it's gone. Sorry if that wasn't cool. I put it on my install on my '21 FP. Works great.

What an excellent video! Well done!

This seems like such common sense that it ought to come w/ this..... I mean these are pretty expensive "toys" & I'd expect the thing to already have a pump on her? Well, if I knew I would not ask. Cool install

Nice install and super smart idea for the bilge pump, extra insurance when youre offshore. I had a question, I'm wanting to get a FP trophy, what is the overall length of the FP on the trailer from tongue to back, I need to see if it fits in my garage. Thanks and cheers from Florida!

I was wondering how the JB weld is holding up I'm about to install one on my GTX thanks

Check your Carbon Seal! U can see the dust on the sides inside the ski

I just ordered the FISH PRO SPORT after seeing your Bahamas video. I’m just getting into inshore/offshore saltwater fishing. Would you consider doing a video covering your fishing gear?

I would prefer if it was switched automatically, with an manual switch aswell.. Great job and neat work with with what you have though.

Great job but I feel like you should have some kind of switch, either a toggle or a float switch

hey bro love your content. i noticed your fish finder piece on the bottom of your ski. does it go work through the hull of the jetski or is there a hole in the hull of the jetski

Great job! This type of video is tough to make and definitely triples the time it takes to complete the project. Have you ever had water in your hull? I just installed the BRP auxiliary battery kit last night and nav lights and it seems to stay pretty dry in there.

Great install. Only suggestion. 5200 down a piece of Starboard. Then. 1/4 stainless screws threw the bilge pump strainer. Snap the bilge pump in. By glueing the bilge pump in directly, how do you replace it if the pump goes bad and can’t get the same pump?

Do the covers that go over the engine have gaskets? Is it common for water to get in?

I ordered mine and should I do this ? Is it recommending?

Is that your drive shaft boot off down there in the bilge.....?

My question is why did you have a discharge into the foot well and should be discharged to the outside of the ski and why didn’t you put it on the switch so you don’t run your battery down with the pump continuously running even though the skis on you’re putting stress on the electrical system and possibly more than likely burn out the pump when it’s running dry

Well done! Why are these not standard on this model? Have you had situations before installing of having water in the compartment?^

Great video …. Do you think it would be better if the bilge pump had a float switch? And do you think it would be a problem having the plastic tube zip tied to the hot exhaust?

Off topic.....I see you are out quite often. I plan on running in the Gulf 1-3 times a week weather permitting and brackish or fresh when I can't get offshore. Do you spray your engine down with a protectant ex.(wd-40) every time you wash? Thanks.

I didn't realize the fish pro bilge pump was so much more involved than the normal bilge pump.

Pump always running how long will that pump last? Does the pump has a build in flow sensor? Bother way im always waiting on your fishing videos keep them flowing

The nuts for the seat platform are 10mm. Use a wrench or sock rather than a vice grip.

Does water go in our bilge?

Is that where SeaDoo recommends drilling the hole? About to put a deposit down on a 2022 GTX Limited and am just curious because i’m probably just going to have the manufacturer or dealer install it. Drilling a hole into the precious hull of my new SeaDoo will also bring a tear to my eye. I’d rather have a professional do that.

Have seen a guy on youtube who makes auxiliary battery boxes for these, would it be easier to just get a back up battery thus not putting any additional drain on the primary, especially since its running when not needed.

Why is it necessary to put this Bilge Pump on the jet ski? Thank you

why would the bilge pump run without any water to eject? isn't that supposed to be automatic .. only when water level rises to a certain level is the engine bay ? why was it humming right when you pressed the start button?

Is that something we should all do to our skis?

Is that something we should do to our skis?

my jet stopped seadoo spark can you help me?

Bro are you in Miramar /pines area ?

When the ski is running so is the pump?? Will that cause the pump to burn out with The pump always running?

Wat do u charge to do them

Where does the water drain after it goes near your feet

Just concerned that it is running all the time the switch is on….needs to be on a float switch… also, isn’t $154 for a OEM Seadoo bilge pump kit highway robbery???? Don’t they make enough $ on the 22k + Jetski? Big fan btw, good on ya!

My only worry is if the pump is running consistently that it's going to eventually burn out if there's no water

Any tool is a hammer…

Is there a specific reason the pump output thru-hull fitting was installed on the port side of the PWC where it will fill the foot wells vs. the recommended / standard transom install (see Sea-Doo pub: 487802051) where the water will be ejected overboard?

i wouldnt of zip tied anything to the exhaust

Why on earth isn’t the bilge pump standard on this type of PWC? Common SeaDoo…. ….

Couldn’t of used a rubber mallet 😮

Wondering how long it took for him to realize it was a bad idea to drill that hole there instead of on the side of the hull where it usually goes🤣

Too bad the Seadoos come with a factory installed bilge pump. Great video! Cheers!

I still don't get it, why put a water pump on it?

Looks like your carbon ring has some wear….

bilge pump should come stock on sink doos

I hope you know that it costs 20$ without float switch and with a float switch 26$ So you want to say it without a float switch? 😄😄 so it working all the time? 😆

Good, now you need another one for the footwell. Horrible location for discharge

Im sorry but i totally disagree with the way this is installed. The creator of video stated "This bilge is ran on a fuse, it doesn’t drain your battery." that is not true. The pump is running off the battery, the fuse is there to protect it from drawing too much current in case of a short and frying the electrical. also there should be a float switch on this bilge. you do not want a bilge pump running the entire time a your ski is powered up. If your thinking of adding a bilge, do not follow this video. Get a bilge pump with a float switch and wire it direct to the battery with a inline fuse. The only time it should kick on would be if water is in the hull. it should not run all the time. also if your sitting at a dock with this setup and your ski takes on water the bilge will not go on unless your there to see it. thats the reason for a float switch and wire direct to batt with inline fuse. so if your not around, say good bye to your ski. this is really bad advice video. sorry to say, as i LOVE your content

FOR YOU WHO ARE READING, JESUS ​​LOVES YOU. THE CROSS IS NOT TO SHOW THAT YOU ARE GUILTY, BUT THE CROSS IS TO SHOW THAT YOU HAVE VALUE TO GOD. HE OVERCOME DEATH ON THE THIRD DAY. HE LOVES YOU! HE MADE THE SACRIFICE FOR EVERYONE. BECAUSE JESUS ​​WANTS TO TAKE US TO ETERNITY TOGETHER WITH HIM. WE DON'T DESERVE SALVATION, WE ARE SINNERS, BUT IF WE REPENT, THE BLOOD OF JESUS ​​​​FORGIVES OUR SINS, HE HEALS US, JESUS ​​​​GIVES US ETERNAL LIFE. BELIEVE IN JESUS ​​🙏🙏🙏 Jesus is the way, the truth and the life. Commit your life to Jesus Christ so that he may be the Lord and Savior of your life and that you too may receive eternal life. May God bless you and your family in Jesus' name. JESUS ​​​​CHRIST LIVES...