how to service VGA Card  

ramai doang, tidak di subscribe 😡 visit now bit.ly/nssnetid - promosi 😘🤣

This is incredibly dangerous and could risk damaging your components, to be safer you should put it in a washing machine first, *then* a dishwasher, *then* brush it with steel wool.

“Everyone feels better after a bath” even GPUs at this point.

Don't tell me this is the card that is really sitting in this sick ass build

Sometimes driving over it when you're inside an air conditioned Toyota Prius hybrid while brushing your teeth and letting your dog hump your leg will also do the trick.

I was cool when you wash with water and soap Its not recommended, but its fine as long as you dry it properly But the moment you brush it with that brush you usually use on the floor My heart dropped to my stomach You can easily knock a capacitor or two off with that

I know that this is perfectly fine, but, *shivers* the scrubbing was so nerve racking as an expensive graphics card is scraping across concrete with soap on top😬

Satisfying to see the card scratching on the floor

What a brilliant idea with the brush, men you are genius 🤯🤯🤯

... i really recommend you do it, but with isopropyl alcohol, and dont brush with that, you will damage the circuit

I washed it shitty: the thermal paste was not completely washed off, I used a coarse brush, dried it with a soldering hairdryer. Served so-so VGA

The only time I’d ever let this even cross my mind is when my 3070 gets beaten by a 200 dollar dell laptop apu

Yeah, rubbing it on concrete really helps to clean 😂 my god what a nightmare

When you dont have love for your gpu

to everyone who thought this was fake, I'm telling you it's the most recommended method

Classic old way and it's usually works as long as it isn't a hardware damage.

To put into safety, I recommend using distilled water instead of tap water because the mineral would damaged the component just like how waterproof phone cannot even handle the sea or salt water, that kind of water is actually contain more mineral than tap water

This is not the first thing you should do if your pc doesn’t post. Even if no electricity = no shorts with water. You should check other components in your system and check any debug LEDs on your motherboard if present, check any PSU connections, try different video ports, try a different monitor/tv, try a different graphics card or iGPU if present, cmos reset, physical PCB damage, try the card in another system. Not immediately take it apart, dump soapy water on it, scrub a little, and boom it works. At most it looks like all he’s doing is cleaning it.

Do another one, "How to clip nails"

Damn, my heart stop for a moment.

Kudos for not breaking the components man. Don't brush too hard on the components ya'll

My dad is a computer guy as well. He said dust can make circuit shorts and had to be cleaned

Could you show how to do this on a 30 series card? I'm not sure how to take them apart

Video was played in reverse, GPU stopped working AFTER cleanup...

RIP to those who actually did this.

Я тоже так делаю, с компом 2003г и игры идут 12k 999fps в Киберпанке😁

Слушай, а хорошо это ты придумал, пойду помою свою RTX 3090 может FPS прибавится )

Plot twist : This video is played backward

The case is Cube Gaming Lich?

The first thing you need to do - work with 2 hands.

I am so gonna do this with my 3080!!!

I tried this to my 3070, and after i put it for sun light icame back and it is gone How to fix this

Kirain endingnya bluescreen 😅🙏🏼 Taunya mantul nyala

Better to use isopropyl alcohol and distilled water.coz regular water has mineral which damage electric.. use distilled water and ultra sonic cleaner then use isopropyl alcohol then dry off

Put it on oven, trust me it's worked

1600 grit sandpaper 👍 works like charm

Ever heard of Isopropyl Alcohol and soft bristle brush? Don't be stupid and use that. Also don't use heat gun, it may melt the sotter and might cause a short circuit. Just open the components, use a microfiber cloth + a soft bristle brush and dip it into isopropyl alcohol and use it to clean it but remember don't use the cloth on the GPU chip, to remove the thermal paste use a alcohol swab or a soft tissue and remember not to put too much pressure because it might rip of tiny microchips. Then use a hair dryer and dry it by keeping the hair drier not too close for 2 minutes max. After removing the thermal paste, apply new one (remember to use the ones that's suitable for your gpu's temp and power usage. Now close everything and you're done.

Opa, fiz na minha e a NASA passou aqui em casa para que eu fizesse o cadastro para entrar na agência, vou estar no próximo foguete!

Why? Why? WHY?!

plot twist: turned it on with integrated graphics

You know just brush it while dragging through concerete. Its okey. Its not like its is gonna drop some important part on the back side...

Same GPU as mine....But still it causes corrosion! I have done this to my motherboard! 😊

Instructions unclear, i wash my GPU, put on my PC and my house is on fire.

Nice cleaning ,u changed gpu 😂

Brought my car to a car wash. “I serviced my car”

Уж проще новую купить,чем в воде купать и потом наполнить море слез

Ну я надеюсь те кто поверят реально сделают, может хоть месяц без дерьмовых видео пробудут, и так уже дигродировали ниже некуда

When your tired of gpu prices

Got a heart attack when he used the brush lmao

После подобных водных процедур, срок службы сократится, а количество карт вышедших из строя возрастет. Если в массы пойдет видео, то мастера по ремонту на подобе того, что в этом видео обоготяься.

I hope this is a joke

Cleaning with water and soap is okay but not recommended. But why did you use hard floor brush. You could've use toothbrush instead :(((

Some capasitor might still have some electricity in it 😎

My heart hurt when it got scrubbed on the concrete 😩 But I'm glad it worked in the end 👍

Yang nanya GPU 😒 shope.ee/3fQRvtra4G

I just installed a waterblock on my 6900xt, and man imagine if i was as rough with my gpu as this guy.

ok, you can wash it with water or isopropilic alcohol but just don't brush your graphics card or any component of your pc

Ada apa ini rame rame 😆🤣

First: dont risk it Second: APPLY THERMALPASTE OR YOUR GPU IS DeAD!

I even sometimes microwave my service mobo after washing it... And its not a joke...

Para la gente que no sabe puedes limpiar todo con agua y jabón si esta totalmente libre de electricidad y luego se deja secar muy bien

The water he used. It's 0 mineral water That can't damage curcit board 😂❤️❤️❤️🤔

For a second, i think i'm watching howtobasic

This is where Gopi bahu learnt how to clean a laptop

So if i put my aorus rtx 3080 in a soapy bucket will it go faster also? 🤣

I mean, so long as its distilled or deionized water, its just as safe as using iso alcohol. The soap though… I dont know about the soap… The brush just made me cringe.

Man, i didnt realize until he shows gayung 😂 . Now i know he is Indonesian. 🍻

I've done this on car computers and it has worked out well

I bought some untested cards lately, and right away i do that water cleaning..and try to drying for 2 days. And all the card work normaly clean and shine.

itu yg ada bekas pasta gk perlu di kasih pasta bg kayak proci?

R.I.P warranty 💀

Good tips but curious your setup🤭😂

Can you do the same thing with RTX 3090?

(You put in the water) John Cena : Are sure about that? Me : (bitting nails)

For some seconds I thought this was how to basic 😂

Bro just scraped his gpu.

DAMN HE'S NOT JOKING!

This isn’t really servicing, it’s just washing the board and then doing a temporary fix.

I know these procedure. But i dont know about brushing it. Anyway the important part there was hitting it up with that heat gun. But that gpu wont last long until you need to hit it up again with heat gun. Reballing is probably the best to fix this kind of problem with the gpu.

Before you try it out on your pc I recommend practicing it on friends pc and neighbour pc

He didn't even put thermal paste back on lol

I put mine in a ceramic tumble roller to polish the connectors.

Reall "Dust Cleaning"😂

i just experienced 15 stages of grief.

i love it, take a soap n brush 😂👍

My 1050ti has this issue whenever i install the drivers. I get black screen on my monitor. Any help?

What I usually do is tape it to my car and run it to a car wash. Works like miracle everytime. 👌

Спасибо,теперь я без компа

You should put it in the oven at gas mark 6 for 45 min before doing this just to kill all the germs before hand.

Well, yeah if you dry it propperly its ok, but next time try to brush it more nicely XD

I thought he was going to do a simple oil change but nah he gets the whole engine wet inside and out

Microwaving it helps in the drying process I guess

I'm not warning everyone, but i think i found a maniac

It's cool as long as "distilled water" is used. Tap water will be dangerous as it contains ions and can cause short circuit later.

Awalnya gua kira lu orang luar bang, tapi setelah liat Sikat sama Gayung lu gua jd tau itu yg ada di tukang perabotan 🗿🗿🗿

Reminds me of a chubby kid who washed his ps2 slim coz it got dusty. For some reason he came back with bruises from school. Hope his alright!!

If it's dead then you can try this method, because it might save it... Because Linus also have done it even with microwave...

ah yes, instead of unplugging only the fan, you also unplug the fan connector.

this is how Indonesian people fix PC

Lebih baik pakai sikat gigi.. Lebih menjangkau celah sempit dan bulu sikat nya lebih halus ketimbang pakai sikat baju.. Dan satu lagi.. Nyikat nya sambil di pegang VGA nya.. Jangan di sikat model nyikat baju di lantai.. Bisa rusak komponen2 nya di board gara2 tergesek permukaan lantai