No video :(

How to set Flight Conditions on the Futaba T18SZ | Beginners Guide

Подписаться 56 тыс.

Просмотров 7 тыс.

50% 1

This video is aimed at beginners who are new to the hobby or new to Futaba. It covers an overview of configuring Flight Conditions on the T18SZ. I’ll show you how I setup all of my models and how to create and configure your own Conditions.
Let me know if there is anything else you would like covered.
⏩ JUMP TO ⏩
🎥 00:01 - Intro
🎥 00:31 - Opening Credits
🎥 00:47 - Showing Flight Conditions on my Extreme Flight Laser
🎥 03:40 - Condition display on the TX (T18SZ)
🎥 04:20 - Showing the Condition Alarm when starting TX in the non-default condition
🎥 05:17 - Condition Select menu
🎥 06:31 - Setting AFR per Flight Condition
🎥 09:45 - Creating a New model and Setting Flight Conditions
🎥 11:20 - Copying a Flight Condition to a new Flight Condition
🎥 12:11 - Assigning Flight Conditions to a Switch
🎥 15:00 - Finishing off
🍵If you want to say thanks, please Buy Me a Coffee🍵
www.buymeacoff...
*Donations will be spent on planes, not coffee!
✅ NEW TO MY CHANNEL? ✅
Hi, I'm Matt when I’m not busy running my IT Services company I like to spend time doing my main hobby which is all things related to radio controlled aircraft.
On this channel you will find videos of plane builds, flights, crashes (hopefully not many) and tutorials.
🔸Please subscribe to my channel if any of these interest you!🔸
www.youtube.co...

Опубликовано:

5 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 19

@colinsmith4699 2 месяца назад

A great video

@MattTakharRC 2 месяца назад

Thanks again 😃

@davew1234 8 месяцев назад

Thanks for this video, it’s been a huge help for me 👍

@MattTakharRC 8 месяцев назад

Awesome! Really glad it helped!

@heydonray 2 месяца назад

Great info. Thanks.

@MattTakharRC 2 месяца назад

You’re welcome. Glad it was helpful. 👍🏽

@ChunkyC_RC 8 месяцев назад

Very nice video. Tons of good info...

@MattTakharRC 8 месяцев назад

Cheers!

@dombivi 4 месяца назад

thank you how do you set conditions when you want to trim a plane with the gear down .So when you put the gear up again back to the old flight trim .

@MattTakharRC 4 месяца назад

That’s a great question and something I’ve not done. My initial think is to apply a mix with the gear switch, rather than conditions. For example mix the a bit of elevator in when the gear is deployed, presuming that’s what you need. Like you would when mixing flaps and elevator. Does that make sense? I don’t think you can do it with trims as I’m believe they are independent of flight conditions.

@ReefHopper 10 месяцев назад

Not quite sure what the advantage of conditions are over doing dual or triple rates. Am I missing something?

@interman7715 10 месяцев назад

Yeah I can see what you mean ,this fellow has over complicated it imo.He could have just set up triple rates with a lot less ginning around. Flight conditions are mainly used for complicated models for example a landing condition where one switch set flaps down and landing gear down and maybe different rates on control surfaces. I fly aerobatic 35% planes and just set triple rates on one switch for all my flight regimes .

@MattTakharRC 10 месяцев назад

No you’re not. You can do it either way in fairness. I’ve always done flight conditions as it’s what I’m used to. Rates would also work

@mikecomeaux7603 Год назад

Matt Im attempting to program a cortex gyro in my 50cc airplane. I'm using T18SZ and would like to assign SE switch with stabile flight and the LD to fine tune and Hold with RD to fine tune. do you have a video that would cover that? Regards Mike

@MattTakharRC Год назад

Hi Mike. I see what you’re trying to do and it’s a great idea. I don’t have a video but I will look into it. I’m not sure if it’s possible as I’ve not done it before. But it sounds logical

@andyMSH700 4 месяца назад

futaba has been my tx of choice especially as i dont really like programming but after 2 tx batteries failed on me i have changed to radiomaster....much superior opensource TX and once you get the hang of it its great....and so cheap...futaba is a rip-off and their technical support in the UK is terrible. The menu’s on futaba make little sense and you find yourself going around in loops.

@MattTakharRC 4 месяца назад

Wow sorry to hear about your issues with Futaba. Two TX batts failing is crazy. I’ve never had one go bad. I’ve not used a radiomaster but hear good things. I think most people tend to stick with what they know. I flew Futaba when I first started, hence I went back to Futaba when I got back into the hobby a few years ago. I do think they need to up their game when it comes to the software.