How to Set Palm Tamper Depth | Breville Barista Express

Подписаться 88 тыс.

Просмотров 296 тыс.

50% 1

Palm Tamper: geni.us/hLwubGd
Tamping Mat: geni.us/MWsc
Dosing Funnel: geni.us/6lghM
Try our coffee! geni.us/4AAmhpj
(As an Amazon associate, I earn from qualifying purchases)
Are you wondering how to set the proper tamping depth for you new espresso tamper? This palm tamper for the Breville Barista Express is a great way to improve consistency. Tamping depth is a very important factor in consistent espresso extraction. In order to set this depth properly, use this simple exercise to ensure that you are tamping to a level that will not cause the espresso puck to come in contact with the shower screen. Proper spacing between the puck and shower screen is very important for both the cleanliness and performance of your espresso machine.
#espresso #brevillebaristaexpress #coffee
Filming Setup
Camera: geni.us/Hufs
Lights: geni.us/spg5S
Microphone: geni.us/Vvr3Dyp
Slider: geni.us/Fp5KU5
Tripod: geni.us/fDiXW
Fluid Head: geni.us/kFst
AFFILIATE DISCLOSURE:
Some of the links used in the description will direct you to Amazon, as an Amazon Associate I earn from qualifying purchases at no additional cost to you.

Опубликовано:

14 мар 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 325

@LifestyleLab_ 4 года назад

Palm Tamper: geni.us/hLwubGd Tamping Mat: geni.us/MWsc Dosing Funnel: geni.us/6lghM (Affiliate Links)

@ravi911uk Год назад

The Sage machines use a 54mm Portafilter. This tamper is 53mm. Surely this will leave a 0.5mm non-tamped zone around the edge?

@LifestyleLab_ Год назад

They are designed specifically for Breville baskets, this isn’t a worry. Just like how 58mm tampers are actually 58.4mm

@frankoverman9543 4 года назад

I've got the distributor/tamping tool in my cart. As for the funnel, my son 3D printed me one a year or more ago. Works great!

@kdmac2025 3 года назад

Thank You!!! My 1st shot pulled after following this method was SOO MUCH better than my usual shots! Tamping was one of my flawed variables... now as I "Dial In" my shot with Appropriate Grind Size, Preferred Flavor Ratio, and Time of Brew... I should get ONE HELL OF A NICE SHOT!!! Thanks!!

@utube3182 3 года назад

I finally bought a palm tamper/distributor. OMG what a difference it makes. Thanks for providing the info. Really makes it easy to get GREAT SHOT.

@KTMSAS-Duc1200S 3 года назад

I have never been quite satisfied with the coffee flavor from my 870xl. I do experiment a lot and it keeps getting better. I purchased the distributor like yours and finally all the hard work and testing has paid off. It appears I was not getting my tamping correct nor my distribution, as now I get perfect pulls every time and they taste fantastic! Thank you!

@LM-iq8pp 2 года назад

God - unbelievably easy to do, and what a fantastic result! Just pulled a perfect shot (with a bit of doubt before - sorry!)

@soul105 2 года назад

Your video is relevant for any SBE/BBE user to this days, perfect tip. Thanks for sharing your knowledge.

@fotomaniacs 4 года назад

Thanks for making the video. I just got the distribution tool and wanna make sure I'm doing things correctly.

@krehbein 2 года назад

Cool! I've had this tamper for a couple years and never knew how to really adjust it. Didn't even know the top of it was meant to be used to smooth the espresso. Thanks

@IKAPECOFFEE 2 года назад

Hello friend, do you need a free tamper , i can send you one to try ,thanks

@larjkok1184 3 года назад

Use the Razor trimming tool and hold it on the edge of the tamper. Adjust the tamper tool to match it perfectly.

@jaquestraw1 2 года назад

yep!

@sidtp7307 2 года назад

Exactly right

@the_kingd0m 2 года назад

That's too low. It removes way too much coffee and the depth is unnecessary low. Meaning that depending on the grind size you may not even be able to get 18g into the portafilter at that depth

@alexcrews2426 2 года назад

@@the_kingd0m I dont think it is too low, it actually makes a higher puck than the 7.5mm in this video

@jacksos101 2 года назад

I really don't understand the razor tool. If you use it after tamping its just going to damage the puck and cause channeling....

@vladsanin3761 3 года назад

You made my life happier. Very helpful information.

@gthomo1011 3 года назад

Mine is on order. Always thought it looked to be a bit of a gimmick but it looks like I was wrong. Excited to get it now. Good video.

@lgxiii 2 года назад

Very well done! This is the only way to set a distribution tool to the minimum depth. Should you trust the dime rule for clearance, simply put a dime over the ground bed, lock in the portafilter, then set the distribution tool to dime imprint level. Bang, it’s done. Lastly, adjust the dose weight to reach this level. When done, adjust grind size for perfect extraction. Compensate weight of the dose by the roast level. Increase dose with light roast, decrease with dark roast. Success guaranteed! I have never change the depth of tool fore the last 3 years and probably never forever. No matter the brand of your machine, size of basket, batch of beans, follow this procedure and you will be in business.

@amiraloves04 4 года назад

Great content! This looks like a great tamper! Thanks!

@u40fit33 2 года назад

Thạnks for sharing Great tutorial. I’ve just bought the tamper. It helps a lot.

@mekdev 3 года назад

Thanks for the measurement! Appreciate the shared efficiency, subscribed!

@NoobToobSteak1 2 года назад

your videos are always very practical. Thanks a bunch

@nancyguzman8756 2 года назад

Ugh! Thank you for this! I’ve been having a hard time with this tool. I couldn’t get either side right. But I’m going to try this!

@nomadsolos 3 года назад

Again - * * * * * 5 star review from me. Such useful information.

@garrettbernstein5991 2 года назад

You may be amused that I found a use for the razor trimming tool - I used it as a template/guide for setting the depth of my puck tamper. I put the top of the razor on the top of the puck and adjusted until the razor edge came against the base of the puck. The depth came out to ~.75mm as well. I like your approach better, but had to share a use for that razor...

@rogeliorios13 2 года назад

Very informative video . I just got my palm tamper I am about to use it.

@didarsehra9053 Год назад

excellent video. thank you, it worked like a charm😊

@samuelleask1132 2 года назад

Thanks for the video! Very helpful

@pmich 3 года назад

Brilliant.... Going to check mine to ensure its correct

@barbarahanson7017 Год назад

Extremely helpful. Thank you.

@MarkMphonoman Год назад

Thanks, this was EXTREMELY helpful. 👍

@ameliabuns4058 3 года назад

I 3D printed one for like 0.5$ and I set mine too your depth and it works so well. I get much more consistent nicer coffee

@douglasmaclean5836 3 года назад

what 3D printer do you have ?

@ameliabuns4058 3 года назад

@@douglasmaclean5836 my own design based a little on the hevo. I call it the doot changer

@MyHam-os4bq 2 года назад

This helped so much. Thank you.

@kitcraft9516 Год назад

This was very helpful even though I have a different tamper/distributor and machine. I have the bambino plus and a picked up a rebranded combo tamper and bottomless portafilter for 35$ and this video got me pretty close to where I needed to be on the first shot. I do have the stock Breville basket in so that might have been a help. Thanks.

@andreiakg Год назад

Thank you this is very helpful!

@tristenjames8763 4 года назад

Appreciate all the videos on the Breville! They've been abundantly helpful in helping me make better espresso. One question: how did you program the machine so the Filter Size button turns the grinder on and off? Thanks!

@LifestyleLab_ 4 года назад

It will turn the grinder off, but not on, yours will do it too!

@cuppabeans 4 года назад

Great video! Any idea when this tamper will be back in stock?

@timmarshall4881 3 года назад

Great video and information thank you.

@beer_goggler 4 года назад

Hi. Interesting video. I have a couple of issues here. First is the tamping weight and distance is directly related to the dose of coffee you use. Eg 16g v 18g will result in different tamped levels in the basket unrelated to shower screen. Second is that even different brands of coffee at a similar dose and grind tend to have a marginal difference so you’d need to recalibrate every new coffee. I just use distributer and adjust to gut feel and also to vary tamp amount to get longer shorter shot when the ideal grind setting is between settings.

@LifestyleLab_ 4 года назад

I dial in MANY different coffees every month. As long as you are using a dose that is not too low (causing the tamper to not make contact), you will be able to dial in using grind size. A standard "ideal tamping pressure" of 25lbs or whatever it was has long been debunked as a myth. CONSISTENCY is what's important. But you are absolutely right, if your grinder is stepped and you can not precisely dial in using grind alone, slightly adjusting tamping pressure can help you dial in between grind settings. The same thing could also be done by varying dose while keeping tamping depth the same.

@Ivanaet 4 года назад

For me, I am too lazy to adjust. So i will adjust my coffee weights. For different beans, i will adjust my grind size.

@vncdvncd8331 3 года назад

great lesson for me! thanks

@tonimathias-grumley6631 4 года назад

Great video on things I do use. I have the same tamper and love it but always wondered how to get it right. Kinda eyeballing it to the built in tamper and dosing tool that comes with the unit, but find it inconsistent. So how much coffee are you using and what is your grind setting? Also, i see you dose first, then tamp. I have seen others do the opposite and was always confused :-)

@JDnBeastlet 4 года назад

Thanks loads - they just came back in stock at Crema and we got the tamper and dosing ring for our Breville Barista Express. The combination works like a charm and the improvement in the consistency of my daily Americano is certainly noticeable.

@LifestyleLab_ 4 года назад

Awesome!

@drizztthedrow2525 2 года назад

great video thank you

@kimbridge5592 3 месяца назад

love your videos

@abgveron 3 года назад

fantastic mate

@20DDan 2 года назад

Brilliant, thank you!

@Wesmosis 4 года назад

Awesome video!

@alfredolongoria7998 3 года назад

Thank you!

@MarkMphonoman 3 года назад

Helpful. Thanks. 👍

@JavaJakesRoastery 3 года назад

Very useful liked and subbed

@Milofchg 4 года назад

Some of these distributor/tampers from Amazon have the depth levels printed/markings on the side of the flat end of the tamper itself.

@andyberry6994 2 года назад

I think this neglects that the coffee will expand and I've found setting to this method the puck sticks to the shower head and issues ensue. I would take your tamp a little further to avoid this and it can even vary by coffee type as some expand more than others.

@m.4612 2 года назад

Hello! You have been teaching so much since I've received this machine. I went ahead and set the tamper depth but when I lock in the portafilter, it doesn't show the dots of the shower screen, just the circle that's in the middle. I hope that makes sense! Do I still need to keep adjusting my tamper until the puck is completely flattened with no indentations of that circle in the shower screen? Thank you!

@isisemkeb 4 года назад

I have been waiting for this video for more than a year. Thank you, thank you, thank you 2M views.

@balalalala13 Год назад

Great ! Thank you. Any thoughts on a Flair 58mm Flair basket

@cable729 2 года назад

Thank you! I was wondering how I was going to judge "30lbs of pressure"!

@daijoubu4529 3 года назад

I measured the Razor with a caliper/vernier and it seems to be around 6.6mm so I've set the tamp to the same height

@artmercado1735 Год назад

thanks, I just notice i have a shower screen imprint and I have the same 2-in-1 leveler tamper

@phantomcreamer 3 года назад

Is this method good for any system? I have heard tamping pressure affects flow extraction. Also, will this be the same for pressurized vs unpressurized baskets?

@ami.ability 2 года назад

This video was very interesting. But I have a request 🤓 Can you tell me how deep the razor is? (This value is equal to 7.5 mm according to your suggestion). I'm a designer but I do not have access to a razor. (Although in another video of you I found out about razor problems). Thank you for your response 🙏🏽

@balalalala13 Год назад

Thank you I was using my distributor/leveller and I tightened it too rigidly. Now coffee is jammed in the threads and I can't unscrew it. Any suggestions?

@tsnstt Год назад

Can you please tell me what is the best distributor size I should use with my 58mm Portafilter? Thank you 😊

@cdvax11 4 года назад

This was very helpful. Thank you. Question. Would this require re-calibration with each batch of coffee since differences in beans and roast times will result in different volumes for the same dose weight?

@LifestyleLab_ 4 года назад

Keep the depth setting the same, adjust your flow rate using grind size

@slow_clumsy 3 года назад

If the grind size steps are too big which is usually the case on a BBE you can make tiny adjustments so it tamps harder/softer or you can up/lower the dose of beans. It's all depends on what you're looking for and what tastes good to you and others

@chomp54321 3 года назад

Excellent! This is exactly what I need. One question though: what is the dosage that you used? It appears that you have premeasured the beans. I have found the Barista Express is not very consistent with its dosage, varying up to more than half a gram. For adjusting the depth of the tamper side, I think the quicker way is to use the "Razor" tool that comes with the machine. It is set to the proper depth. Thanks for the video.

@LifestyleLab_ 3 года назад

I'm using 17.5gr dosed directly into an empty hopper, then I grund until empty. That is the most accurate method I have found on this machine. The razor tool is useful, but measures a specific volume, not a specific weight, which leads to problems in determining brew ratio

@SanDiego-nk7zo Год назад

Thank you for the informative videos! Would you modify your process if using a puck screen? They are quite thin, but would you tamp any deeper?

@LifestyleLab_ Год назад

Yes, you’ll need to leave more room as to not put any pressure on the group head when locking in the portafilter

@justaprivateuser 5 месяцев назад

Hey Bought the sam thing just a different brand, wanted to ask does the ground coffee get stuck on the sides when using distribution?

@alexxyc 6 месяцев назад

I found the easiest way to check is to simply put the tamper on the portafilter coming with the machine after you finish prepping. As long as the line between the silver and black part of the tamper is aligned with the basket/you cant see the metal part, you are good.

@PiusNyamora 4 года назад

Thanks for the great video. Can this work for Breville Barista Pro?

@LifestyleLab_ 4 года назад

Yup! Exact same portafilter

@rahmatwijaya9975 3 года назад

I use the Razor to calibrate the depth. For Tamper use the same depth or slightly deeper from the razor dan 2 mm less for distributor.

@LifestyleLab_ 3 года назад

That's also a good use!

@AM2PMReviews 4 года назад

Nice!

@brentonontour 3 года назад

thanks

@ycming Год назад

would you use this same process for other coffee machine ? thanks

@ggivensjr 3 года назад

Will the dosing funnel work with the Breville Smart Grinder using the Breville double spout portafilter and the hands-free portafilter holder?

@LifestyleLab_ 3 года назад

No, unfortunately you'll need to rest in on the bottom, but it works just fine :)

@Jlui83 3 года назад

When using the distribution side. I noticed a lot of coffee grounds gets stuck where the black and silver part meets. Any idea on how to remedy this? The distribution part is at the minimum setting so I can’t adjust it anymore

@jcasetnl 3 года назад

I had that problem with beans that were particularly oily, especially when grinding finer. The stuck grounds never amounted to more than .25 grams, though, and didn't seem to affect the shot.

@topjets5616 2 года назад

I watched a video from Aju's Cafe and I think he has the best way , you just adjust tamp till the razor tool no longer scraped coffee :)

@fluffycritter 2 года назад

It's good to have this technique around for folks who lost the razor tool or who have a different espresso machine which didn't come with one.

@hkkrr 2 года назад

I can’t get the link to the dosing funnel to work. I mean, it works, but it takes me to a tamping mat. Can someone tell me which brand the one used in the video is? Thanks!

@gollabalaji 3 года назад

Thank you for the videos. Very very helpful. Would the tamper height be the same for the single dose basket (7.5 mm)?

@LifestyleLab_ 3 года назад

Yes, you want to maintain that same gap from the shower screen. You will just need to find what dose works for your coffee in the single basket

@gollabalaji 3 года назад

@@LifestyleLab_ Thank you so much for the speedy reply. Makes sense.

@Jazzcat1980Rip 4 года назад

So with the Distributor set to minimum it’s function as almost nil. Would it not be better after the Tamper is dial in to adjust the Distributor to be more functional? Most of the European or American Distributors are more than $100. The Chinese are under $50 for comparison. Just to be clear your concept is dead on for the final product. Thanks good video, Kevin

@SecuredMinds Год назад

Great video, thanks! I was wondering, is it not necessary to to calibrate the distributor side? In the video you seem to only calibrate the tamping side.

@LifestyleLab_ Год назад

Distributor should be set right near the minimum to just re-distribute the grounds without much compression

@TheSlavoo 2 года назад

Revelation !!!

@lancer876 Год назад

Hi my friend! If I buy this crema tamper... Shoud I still use a stirrer WDT technique? As I understand crema tamper distributes coffee ground too. Thanks for your answer and time. Regards from Mexico.

@LifestyleLab_ Год назад

Yes, WDT is far more effective than a distributor. WDT + Tamp. No need to also distribute

@balalalala13 2 года назад

Thank you. Dou you have a suggested depth for the bambino?

@LifestyleLab_ 2 года назад

Same technique regardless of machine :)

@benlin4838 4 года назад

Does the tamper work for Rocket Appartamento portafilter (58mm instead of 54)?

@LifestyleLab_ 4 года назад

No, in my rocket Appartamento review video I do link to a 58mm distributor though :) ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-NkXE8zs-cD8.html

@djmocok 2 года назад

Will you ever need to change this again say if you change beans?

@ColoSon 4 года назад

it's not available at amazon atm and I can't find it elsewhere. I have a breville bambino. breville always says their portafilters are 54mm. But they are 53mm right? As you also used a 53mm Leveling tool for your Breville. Also another question: The palm tamper you linked, is only a leveler. The one in your video is kind of a 2 in 1. It has both sides. A leveler and a tamping side. Where can I get one of those 53mm? Thank you very much in advance. Greetings from Germany.

@LifestyleLab_ 4 года назад

Hi ColoSon, unfortunately this exact 2 in 1 is only currently available in the US, Canada, and UK. I've linked a similar distribution tool for other countries. GOOD NEWS IS, you do not need the tamper side. I simply adjust my distributor to the correct height and use it to both distribute and tamp. Many many baristas take this approach! See my Appartamento video, I am using only a distributor there :)

@fliptek23 Год назад

Would it be the same depth for a single shot basket?

@tangofoxtrot40 2 года назад

Hi will this setting work for the bambino plus also? Thank you in asvance

@LifestyleLab_ 2 года назад

Yup!

@eocs5285 Год назад

@lifestylelab_ I just bought my matow dual head and I cannot unscrew or adjust the tamper side. Is that a product defect. I can see you were able to adjust yours. Mine won’t budge. Is this a dud!? 🥴

@LifestyleLab_ Год назад

Should definitely be able to unscrew. Make sure you’re holding the correct part steady while trying to turn

@chinthiamtay9032 3 года назад

Hi there I hope you can help me out here. I did exactly what you did in the video but I'm working with Barista Pro instead. With a full does of 18g, I realise that there's just too much coffee, I can't seem to be able to tamp the coffee further after adjusting the level of the tamper...

@LifestyleLab_ 3 года назад

You're likely grinding too coarse. The finer you grind, the more beans you can fit in the portafilter. If you're choking the machine by grinding finer, then you will simply need to lower your dose for those beans. Different beans grinding differently

@chinthiamtay9032 3 года назад

thanks for the advice, I adjusted the grinder to a finer setting and it did work out well. Just one more question, once dialled in, what's the ballpark weigh of a double shot using the double shot button on the barista pro? Is there a range for it?

@ssaffybz 4 года назад

Hi, what kind of cap you used? single or double wall cap?

@LifestyleLab_ 4 года назад

I used a double

@calvintran8691 3 года назад

you can confirm your method by checking the depth sets by the Breville razor dose trimming tool

@dooferme3852 3 года назад

I have just measured mine and it is 7mm and not 7.5 mm....

@micah9261 4 года назад

I just bought this on amazon. What bit on the tamper do you twist?

@larjkok1184 3 года назад

I hope you’re joking.

@noeramirez4975 Год назад

Hi, Lifestyle Lab , what about use the same deep than the razor tool?

@LifestyleLab_ Год назад

Also an option :)

@tobymusson8413 11 месяцев назад

Is there a technique to removi g the back cover off, without causing damage?, yours seems to pull off, easily!

@LifestyleLab_ 11 месяцев назад

Shouldn’t be any special technique, just make sure you’re twisting the right way!

@pokegaiyui 4 года назад

I've experienced different variantions of dosing when it comes to the density of the coffee been. Sometimes its messes up the depth when you are used to a high dense bean then decided to switch to a low dense bean, which in turn takes up more volume, so I have to lower my dosing for lower dense beans. So looking for advice on this.

@LifestyleLab_ 4 года назад

You can change your dose slightly like you're doing to adjust for these variations, but the main variable for dialing in should be grind size. If you are having trouble fitting 18gr in the basket, grind finer. If that results in too slow, or no flow, then reduce the dose.

@joshfoster4678 4 года назад

Following!! I have fresh beans from my local roastery, and was wondering what grind size you'd use for 18g dose

@LifestyleLab_ 4 года назад

@@joshfoster4678 I have a whole video on dialing in! Going to be easier than me explaining in the comments :) ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-d0g8umpINGQ.html

@pip5461 4 года назад

@@joshfoster4678 Depends whether you are using a pressurised or non pressurised basket

@joshfoster4678 4 года назад

@@pip5461 using the double shot pressurised basket, I'm floating around 35/36 seconds for 18gram dose.. it's constant drip not a nice slow flow. Any help?

@shippernessity 3 года назад

My problem though with this distribution tool is that it can't reach the right depth for a single shot (10-11g). I think it's only useful for double shots (14-16g). Do you have any tips to maximize the depth of the distribution tool? Thanks!

@LifestyleLab_ 3 года назад

This tool will work with a single shot basket and a 10-11gr dose. If you are trying to dose 10-11gr into a double shot basket, that is the issue

@shippernessity 3 года назад

@@LifestyleLab_ ooooooh so that's why, thanks! I'm using double shot basket. Now I know.

@kakejelly 4 года назад

Would the tamping depth (7.5mm setting) be used for both the single and double shot porta filters?

@LifestyleLab_ 4 года назад

Yes!

@kakejelly 4 года назад

@@LifestyleLab_ amazing, thanks for the speedy reply!

@Ivanaet 4 года назад

Hi, you only adjusted the tamping height, so tamping force is out of the equation for this tool?

@LifestyleLab_ 4 года назад

Correct, an "ideal tamping force" has shown to be mostly nonsense. As long as you are consistent, and tamping far enough to not have the puck contact the show screen before brewing, dialing in will be a breeze

@GoBraves012 3 года назад

Great content! This method works great for me. However, I have run into a new issue that I’m hoping you can help me understand. I bought super freshly roasted beans from a different local roaster. And all of a sudden 18 g of ground coffee does not fill up the Porta filter as much as the beans I have used in the past. Does it make sense that with some coffee you may have to readjust the depth of the tamper? Or pre-weigh say 20 g instead of 18g?

@LifestyleLab_ 3 года назад

Yes! Some coffees will grind very differently from others depending on a variety of factors. It's good to note that the coarser you grind, the more space 18gr will take up. Meaning that if your portafilter seems underfilled with 18gr, you can grind coarser to get adequate tamping pressure. If you do this and the flow is now too fast, you can also return to the old grind setting and increase the dose as you suggested

@LizzGee1111 Год назад

Thank you, I had the same issue with my latest batch of beans.

@JoeyVaracalli 4 года назад

Have you ever tried using just the distributor in heard a few people try this with good results the folks over at whole latte love use just the jack leveler

@LifestyleLab_ 4 года назад

The distributor side of this tool has the exact same functionality as the Jack leveler, so yes! Just like the Whole Latte Love folks I dont even tamp anymore. I simply set the distributor to the correct depth and spin until there is no resistance. Perfect, consistent results every time

@JoeyVaracalli 4 года назад

Lifestyle Lab are you still setting it at 7.5mm ruffly

@LifestyleLab_ 4 года назад

Yup, I left it there the whole time I had the Barista express in my kitchen. Now I use the Appartamento day to day, and have used the same process shown here to set the depth for that distributor

@JoeyVaracalli 4 года назад

Lifestyle Lab that’s awesome my buddy has the apartmento it’s a beautiful machine.

@JoeyVaracalli 4 года назад

Lifestyle Lab that’s awesome my buddy has the apartmento it’s a beautiful machine.

@michaeljohnson_ok 3 года назад

Curious. Is the supplied tamper not already set to match the portifilter and screen it comes with?

@c0mbat15 3 года назад

He didn't actually talk about the benefits of the palm tamper. It's very heavy and makes even tamping much easier than the cheap plastic one that comes with the Breville. Plus the Breville one doesn't allow you to be exact. The black part of this tamper doesn't go in to the basket so it means that his 7.5mm will not go any further.

@LifestyleLab_ 3 года назад

Here's a good video talking about the differences: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-0xmsCBOBSuw.html

@achilleasmanousakis4622 3 года назад

mind=blown

@christosbougiotas2511 2 месяца назад

What about using too little pressure would that be an issue? Because using less or more coffee changes everything!

@LifestyleLab_ 2 месяца назад

Need to dose the appropriate volume for you basket :) 18g may not be the correct dose for every coffee, depending on roast level and origin the densities can vary drastically! If you're undertamping, you need to increase dose or get a smaller basket

@padraicfallon362 4 года назад

Hello. Quick question. I use fresh coffee everytime but my extraction time from the moment I press the button to get around 36g out is about 15 or 16 seconds. I put 18g of coffee in the grinder and I have the internal grinder also set to the minimum setting so i cant go any finer. Is that just the coffee or is there anything else going on? Thank you. 👍

@itsm3th3b33 4 года назад

That is way too fast of an extraction. Try: 1. Increase to 19g of coffee 2. Tamper harder 3. Check your grinder for defects - spread the ground coffee on a paper towel and check the consistency of the grind. If there are to many coarse bits your grinder may need servicing. Or buy a better grinder. 4. Try a different roast. Darker roasts should grind finer.

@padraicfallon362 4 года назад

@@itsm3th3b33 Thanks for your reply. I will try 19g. It's a fairly new machine so i would hope all is well with the grinder but i will check that also. 👍👍

@deity.. 4 года назад

You can adjust the top plate of the grinder inside the burr grinder; default is at 6 and it’s a range from 1-10; where 1 is the finest setting.

@lazatroncic 3 года назад

Try using freshly roasted coffee. If it is too stale (older than couple of months), it becomes unusable.

@padraicfallon362 3 года назад

Thanks every one. I use very fresh coffee every time but still not getting a long enough extraction. I have the internal grinder set to its finest setting and still not slow enough.

@djmocok 2 года назад

Do you notice taste difference if you tamp deeper than the recommended depth?