bro my gun was shooting 170 fps cause of this, horrible system to adjust dwell, i took my gun apart like 12 times until i found out you can even adjust the dwell with this board
U forgot to mentioned if u have a really short barrel , your J output won't change either max / min settings . then you have to go to minimum and add 1 or 2 up . and done . ( u have 13 steps (14 is the double tap ). so set it on 12 or 13 u good to go for really short barrel like scorpio have .
Did you set the hop at the beginning? How many stages are their until it's back to "full". Mine cycles through 15 but the first 12 make absolutely no difference in joule, the last 3 then nearly half it from 360 to 210. What could be the problem?
Sounds like you have a shorter inner barrel/are running light ammo. Heavier ammo and longer barrel weight require more volume because both increase the time the bb stays in the barrel requiring air pressure. Dwell increases voluming, not pressure. So you're already overvolumed at all settings except the bottom 3 for your length barrel and your bb weight. Staying at setting 4 is ideal because it will be the lowest noise without sacrificing any performance.
When at max dwell and you're setting your psi make sure you've also set the hop as if you do this with zero hop you'll be throwing bbs out under power when you finally set it
@@drug2 hi, just chronod mine today again, got the mtw billet v2 with the 10.3" aswell, but the maxx hop up chamber, not the pricey one, the cheaper one. with 100psi iam doing around 1.5j with 0,32g bbs
@@HappyH4x0r Interesting so you have around 0,2 - 0,3 Joule more. Seems like my gun is somehow broken. i cant even reach the 2J without putting the Reg up to 140PSI
@@drug2 like I said, depends on your system, what hop up unit do you use? The stock one? I think the stock one isn't as tight as the Maxx ones. You could put some silicone grease between barrel and hop up unit, but not into the barrel / hop.
