my binili akong yamaha mg16xu clone ngayon sa stereo input ang audio soure naka press ang pfl bakit po hindi maitaas ng gain knob ang level indicator until peak level,..ang nag peak signal lamang ay yong sa fader peak lights...
@@armandisais871 much better you used if for the Kingdom of God, God will bless you for you generosity keep it up, then May the Lord our God provide you more and bigger music gear
Salamat sa message mo, hinde ko pq na experience gumamit ng adaptor na unbalance to xlr input, ang gamit ko ay xlr to mono jack stereo its working very well for me, kasi and output ng pioneer DJ controller ko ay xlr left and right pero ang yamaha mixer ko ang input ay unbalance kaya and gamit ko to connect is 2x xlr from my dj controller to 2x unbalance ( mono jack) to yamaha mixer
Gamitin mo yung pfl switch nsa tabi ng channel fader para mkita mo sa meter, dapat nsa 0 lang sya or maximun +3 , dapat wag sya aabot ng red, ang tama ay green or plus one or two amber colour for maximum
In my experience, Pag may feedback sa microphone bawaan mo any low frequency, sa mixer naman kung may low cut filter or high pass filter e turn down mo ren then as much as possible wag mo e harap ang speaker mo sa microphone
Sir sa powered speaker po meron po sya volume sa likod ano po ang tamang volume pag nag adjust k ng volume gain sa mixer at sa mic. Dapat ung output ng mic malakas at ung music source
From 12 o'clock to 2o’clock and position ng gain knob, minimum to maximum depende sa venue kung small, medium or large,, per Pag normal lang leave it on 12 o'clock which is unity gain
@@djChoy24cc thank you po. sir newbie po ako meron po ako technics turntable tapos meron ako soundscraftsmen mtx 500 mixer.(kamukha po sya ng numark ppd 1775) tapos meron ako broadway curve 8channel. Ask ko po ung soundscraft ko mixer wala po sya trim,or gain ang meron po sya volume sa phono at masyer volume paano. Plan ko kasi mag sub mixer po. Paano po sya i-apply ung katulad sa video nio po.marami po salamat.
Ask ko lang. How much volume setting of your amplifier prior to PFL test ? Is it set also to 9o clock position? Or set to zero lang? Just watch on master volume the LED indicator to rise then start the volume to rise? I'm confused here. Thank you 😊😊😊
I have no actual amplifier this time, and I'm using an active monitor or a powered monitor I have set it to the 12 o'clock position of the volume control
My Yahaha mixer is not powered mixer, so my amplifier is inside my monitor or speakers, this mixer is using for all inputs that I need then the stereo output of this mixer is feed to my 2 monitor left and right both powered monitor
Para Sa akin ginagamit ko Lang yan pag kailangan ko e check Yong tamang level ng sound input at output ,,,, pero yung ibang mixer na yamaha like 32 channels dalawa and level monitor pwde nka on parate and PFL switch yung Sa akin kasi 12 Channels Lang , thank you for asking matagal lang ako nka reply sorry busy Lang Sir . God bless you
